Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 30 May 2001 10:37:51 +0200 (CEST)
From:      Riccardo.Veraldi@fi.infn.it
To:        <freebsd-alpha@freebsd.org>
Subject:   lotsa problem with Xfree86
Message-ID:  <Pine.NEB.4.33.0105301026510.3365-100000@nikita.fi.infn.it>

next in thread | raw e-mail | index | archive | help

XFree86-4
I ahve lot of troubles.
My card is a GLINT 500TX.

this is the log file from X server. I do not understand why it seems to
probe for 2 graphic devices:

(--) PCI:*(1:10:0) Avance ALG2064 rev 0, Mem @ 0x81000000/21
(--) PCI: (1:10:1) 3Dlabs GLINT Delta rev 1, Mem @ 0x81220000/17
(--) PCI: (1:10:2) 3Dlabs GLINT 500TX rev 1, Mem @ 0x81200000/17,
0x80800000/23, 0x80000000/23

I do not know what this Avance Logic ALG2064 is (Something motherborad
embedded?)
I have an AccelGraphics 500TX board plugged in one of the 3 32 bit PCI
slot.
Anyway if I modify XF86Config deleting the entries for screen1 (ALG2064)
And leaving only screen0 (GLINT 500TX) everything starts. The X server
starts but the screen is complitely messy I hardly can see the windows.
It is not a problem of vsync and hsync because the monitor menu OSD is
displayed correctly... do u think I Scould change graphic board ??
Anyway it is supported. Any suggestions on my problem??
I have a DPW 500a (Miata, MX5 I suppose).
Here I Report you the complete XFree86 log:

thanks
Rick


XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: FreeBSD 4.3-RELEASE alpha [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed May 30 10:19:32 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 0" (0)
(**) |   |-->Monitor "ViewSonic"
(**) |   |-->Device "AccelGraphics"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 16777218.0)
(--) using VT number 3

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:10:0) Avance ALG2064 rev 0, Mem @ 0x81000000/21
(--) PCI: (1:10:1) 3Dlabs GLINT Delta rev 1, Mem @ 0x81220000/17
(--) PCI: (1:10:2) 3Dlabs GLINT 500TX rev 1, Mem @ 0x81200000/17, 0x80800000/23, 0x80000000/23
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
	pm2, pm, 300sx, 500tx, mx
(WW) GLINT: No matching Device section for instance (BusID PCI:1:10:1) found
(--) Chipset 500tx found
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) GLINT(0): Initializing int10
(II) Machine type has 8/16 bit access
(EE) GLINT(0): Cannot read V_BIOS (4)
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "500tx"
(--) GLINT(0): Linear framebuffer at 0x80000000
(--) GLINT(0): MMIO registers at 0x81200000
(**) GLINT(0): VideoRAM: 8192 kByte
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 0.1.0
(--) GLINT(0): Attached RAMDAC is TI TVP3026
(==) GLINT(0): Min pixel clock is 16 MHz
(**) GLINT(0): Max pixel clock is 220 MHz
(II) GLINT(0): ViewSonic: Using hsync range of 31.50-57.00 kHz
(II) GLINT(0): ViewSonic: Using vrefresh range of 50.00-90.00 Hz
(II) GLINT(0): Clock range:  16.25 to 220.00 MHz
(WW) GLINT(0): Default mode "1024x768" deleted (bad mode clock/interlace/doublescan)
(WW) GLINT(0): Default mode "1024x768" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1024x768" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1152x864" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1280x960" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1280x960" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) GLINT(0): Default mode "1600x1200" deleted (bad mode clock/interlace/doublescan)
(WW) GLINT(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) GLINT(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) GLINT(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) GLINT(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) GLINT(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) GLINT(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) GLINT(0): Mode "1280x1024" deleted (no mode of this name)
(WW) GLINT(0): GLINT SX/TX/MX chipsets only support one modeline, using first
(--) GLINT(0): Virtual size is 800x600 (pitch 800)
(**) GLINT(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(==) GLINT(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(--) Depth 24 pixmap format is 32 bpp
(II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Driver provided WriteBitmap replacement
	Driver provided WritePixmap replacement
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(II) GLINT(0): direct rendering disabled
(**) Mouse0: Protocol: "PS/2"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(WW) fcntl(8, F_SETOWN): Inappropriate ioctl for device
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-alpha" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.4.33.0105301026510.3365-100000>