Date: Thu, 17 Apr 2003 01:54:05 -0700 From: Daniel Kives <dankives@cats.ucsc.edu> To: freebsd-questions@FreeBSD.ORG Subject: My sound doesn't work Message-ID: <3E9E6BAD.6B181DE1@cats.ucsc.edu>
next in thread | raw e-mail | index | archive | help
My sound doesn't work. I've been searching around google, I've tried
different things still no sound. This is
some of my info. I have a Sound Blaster Live with Digital Audio
Output. I read the handbook, and tried to follow the page about setting
up the Sound Card.
I added device pcm to my kernel. Then I rebuilt the kernel. Here's my
output, and it seems my computer
recognizes the device.
grep pcm /var/run/dmesg.boot
pcm0: <Creative EMU10K1> port 0xeec0-0xeedf irq 9 at device 9.0 on pci0
pcm0: <TriTech TR28602 ac97 codec>
Then I ran
cd /dev
sh MAKEDEV snd0
I cd to my /dev directory and did an ls -la to all the device nodes the
handbook says I should have: here's the
output.
/dev#ls -la audio
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 audio -> audio0
/dev#ls -la dsp
lrwxrwxrwx 1 root wheel 4 Apr 14 18:03 dsp -> dsp0
/dev#ls -la dspW
lrwxrwxrwx 1 root wheel 5 Apr 14 18:03 dspW -> dspW0
/dev#ls -la midi
ls: midi: No such file or directory
/dev#ls -la mixer
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 mixer -> mixer0
/dev#ls -la music
lrwxrwxrwx 1 root wheel 6 Apr 14 18:03 music -> music0
/dev#ls -la sequencer
lrwxrwxrwx 1 root wheel 10 Apr 14 18:03 sequencer -> sequencer0
/dev#ls -la pss
lrwxrwxrwx 1 root wheel 4 Apr 14 18:03 pss -> pss0
I noticed, it didn't create a midi device node, this might be my
problem. I noticed other people had this
problem, though I found no solutions for it.
Here's some more output, hopefully this helps someone.. I hope I gave
enough information, and any
suggestions or replies would be appreciated.
cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Creative EMU10K1> at io 0xeec0 irq 9 (4p/2r/0v channels duplex)
dmesg
cal[2831]: fatal: open database /etc/aliases.db: No such file or
directory
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 1
done
Uptime: 2h36m18s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-PRERELEASE #3: Mon Mar 31 21:30:28 PST 2003
dankives@192.168.1.102:/usr/src/sys/compile/MYKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (1001.78-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 335413248 (327552K bytes)
avail memory = 320344064 (312836K bytes)
Preloaded elf kernel "kernel" at 0xc057f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f4fc0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xef80-0xef9f irq 10 at device
7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4
pcm0: <Creative EMU10K1> port 0xeec0-0xeedf irq 9 at device 9.0 on pci0
pcm0: <TriTech TR28602 ac97 codec>
atapci1: <Promise ATA100 controller> port
0xef00-0xef3f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7
mem 0xfebe0000-0xfebfffff irq 10 at device 10.0 on pci0
ata2: at 0xefe0 on atapci1
ata3: at 0xefa0 on atapci1
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec00-0xec7f mem
0xfebcfc00-0xfebcfc7f irq 5 at device 12.0 on pci0
xl0: Ethernet address: 00:01:03:26:e5:35
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x14e4, dev=0x4211) at 13.0 irq 9
pci0: <unknown card> (vendor=0x14e4, dev=0x4212) at 13.1 irq 9
orm0: <Option ROMs> at iomem
0xc0000-0xc9fff,0xcc000-0xcdfff,0xce000-0xce7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad4: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata2-master UDMA100
acd0: CDROM <MATSHITA CR-594> at ata1-master PIO4
acd1: CD-RW <LG CD-RW CED-8083B> at ata1-slave PIO4
Mounting root from ufs:/dev/ad4s2a
pid 279 (squid), uid 65534: exited on signal 6
pid 292 (squid), uid 65534: exited on signal 6
pid 303 (squid), uid 65534: exited on signal 6
pid 305 (squid), uid 65534: exited on signal 6
pid 316 (squid), uid 65534: exited on signal 6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E9E6BAD.6B181DE1>