From owner-freebsd-bugs Thu May 16 06:45:12 1996 Return-Path: owner-bugs Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id GAA02177 for bugs-outgoing; Thu, 16 May 1996 06:45:12 -0700 (PDT) Received: from email.croughton.af.mil ([131.56.128.2]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id GAA02151 for ; Thu, 16 May 1996 06:44:45 -0700 (PDT) Received: from bnochd.croughton.af.mil (bnochd.croughton.af.mil [131.56.128.174]) by email.croughton.af.mil (8.6.11/8.6.9) with SMTP id NAA01344; Thu, 16 May 1996 13:45:20 GMT Message-ID: <319B4D84.4CC5@603cs.croughton.af.mil> Date: Thu, 16 May 1996 14:45:08 -0100 From: "Scot W. Hetzel" X-Mailer: Mozilla 3.0b3 (Win16; I) MIME-Version: 1.0 To: bugs@FreeBSD.org Subject: Problem Installing 2.2-960501-SNAP to WD 2.5 GB HD. References: <4m02u4$c00@dyson.iquest.net> <4m9vv8$9l@dyson.iquest.net> <31967D0C.203@603cs.croughton.af.mil> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-bugs@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk I am having problems installing FreeBSD 2.2-960501-SNAP to my system that has 3 IDE Hard Drives (2 WD 1.6 GB, and 1 WD 2.5 GB HD). The FreeBSD 2.2-960501-SNAP Installation floppy will start to load, but after the waiting at "boot:" ends I receive "ERROR: C:0 H:0 S:0". My System is configured as follows: drive 0: WD 1.6 GB 0 774 MB PRI DOS 1 774 MB FreeBSD drive 1: WD 1.6 GB 0 774 MB PRI DOS 1 774 MB FreeBSD drive 2: WD 2.5 GB 0 803 MB PRI DOS 1 611 MB Extended DOS 2 1024 MB FreeBSD To get my system to reconize the drive I had to set Translation to Extended CHS and Auto Configure in CMOS. With the Above Configuration I can Install FreeBSD 2.1.0 to all the drives. I can get FreeBSD 2.2-960501-SNAP to install, only after I disconnect the WD 2.5 GB HD from the system. But as soon as I connect the WD 2.5 GB HD, FreeBSD 2.2-960501-SNAP boots with the error msg "ERROR: C:0 H:0 S:0". Any help solving my SNAP problem would be appriciated. Scot W. Hetzel Looking Forward to 2.2-RELEASE.