Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Jun 1997 20:11:58 +1000
From:      Robert <robert@chalmers.com.au>
To:        freebsd-questions <freebsd-questions@freebsd.org>
Subject:   Need help from ppp/pap guru please.
Message-ID:  <339D286E.46ED@chalmers.com.au>

next in thread | raw e-mail | index | archive | help
Hi still.

Here is a printout of the PPP session to the NT server. As you see,
it connects fine, but wont start PPP ? Note the ppp/PPP transition is
not happening.

User Process PPP. Written by Toshiharu OHNO.
Using interface: tun0
Interactive mode
ppp ON nanguo> Dial attempt 1
ppp ON nanguo> show lcp
ppp ON nanguo> LCP [Ack-Rcvd]

 his side: MRU 1500, ACCMAP 00000000, PROTOCOMP 1, ACFCOMP 1 MAGIC
00004698
 my  side: MRU 1500, ACCMAP 00000000, PROTOCOMP 1, ACFCOMP 1 MAGIC
9ff1061a
 Defaults:   MRU = 1500, ACCMAP = 00000000       Open Mode: active

ppp ON nanguo> show ipcp
ppp ON nanguo> IPCP [Initial]
 his side: 203.22.80.20, 0
 my  side: 203.22.80.21, 2d0f00
 connected: 0 secs, idle: 0 secs

Defaults:
 My Address:  203.22.80.21/0
 His Address: 203.22.80.20/0
 Negotiation: 0.0.0.0/0

ppp ON nanguo> show route
default          203.22.80.20       ffffffff  UG     (3)
127.0.0.1        127.0.0.1          ffffffff  UH     (6)
128.8.10.90      203.22.80.20       ffffffff  UGH    (3)
128.9.0.107      203.22.80.20       ffffffff  UGH    (3)
128.63.2.53      203.22.80.20       ffffffff  UGH    (3)
192.5.5.241      203.22.80.20       ffffffff  UGH    (3)
192.33.4.12      203.22.80.20       ffffffff  UGH    (3)
192.36.148.17    203.22.80.20       ffffffff  UGH    (3)
192.112.36.4     203.22.80.20       ffffffff  UGH    (3)
192.203.230.10   203.22.80.20       ffffffff  UGH    (3)
198.41.0.4       203.22.80.20       ffffffff  UGH    (3)
203.1.96.0       6.0.0.0            ffffff00  U      (1)
203.1.96.4       6.0.0.0            ffffffff  UH     (1)
203.1.96.5       6.0.6.0            ffffffff  UH     (6)
203.1.96.6       6.0.6.0            ffffffff  UH     (1)
203.1.96.26      6.0.6.0            ffffffff  UH     (1)
203.1.96.255     6.0.6.0            ffffffff  UH     (1)
203.61.61.129    203.22.80.20       ffffffff  UGH    (3)

ppp ON nanguo> show auth
	AuthName = xxxxxxxxx
	AuthKey  = xxxxxxxxx                

ppp ON nanguo> show modem
device: /dev/cuaa1  speed: 115200
cs8, none parity
connect count: 1
outq: 0
outqlen: 0
DialScript  = ABORT BUSY ABORT NO\sCARRIER TIMEOUT 10 "" ATZ OK-AT-OK
ATE1Q0 OK-
AT-OK \dATDT\T TIMEOUT 40 CONNECT
LoginScript =
PhoneNumber(s) = 403337

ppp ON nanguo> show proto
     Protocol     in        out      Protocol      in       out
   IP       :        0,        0   VJ_UNCOMP:        0,        0
   VJ_COMP  :        0,        0   COMPD    :        0,        0
   LCP      :      715,      716   IPCP     :        0,        0
   CCP      :        0,        0   PAP      :        0,        0
   LQR      :        0,        0   CHAP     :        0,        0
   Others   :        0,        0

ppp ON nanguo> show msext
 MS PPP extention values
   Primary NS     : 0.0.0.0
   Secondary NS   : 0.0.0.0
   Primary NBNS   : 0.0.0.0
   Secondary NBNS : 0.0.0.0

ppp ON nanguo> close
		quit

Thanks for any pointers. As you can see, it's basically working, but now
my end
isn't starting PPP, which I presume is for some magical reason?

thans 
bob
                 

                  

                       

-- 
http://www.chalmers.com.au Books-New & Secondhand  Support Whirled Peas.
Agents for CIBTC. Associate of Amazon.com, and Partner Program with iBS.
Books about China, books from China.         Sheng huo jiu shi dou zheng
Business Links in Dalian, and Beijing.          Building the China Trade



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?339D286E.46ED>