Date: Wed, 21 Feb 2007 21:46:16 -0800 From: "Ted Mittelstaedt" <tedm@toybox.placo.com> To: "FreeBSD Mailing List" <freebsd-questions@freebsd.org>, "jekillen" <jekillen@prodigy.net> Subject: Re: Enet driver for Marvell Message-ID: <013301c75644$c5dcb850$3c01a8c0@coolf89ea26645> References: <1bee4d3b4d70168efb9a5f2fd5fd84e4@prodigy.net>
next in thread | previous in thread | raw e-mail | index | archive | help
That driver isn't in FreeBSD 6.2 release you can get it here for 6.2 plus instructions to install it: http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It will be in FBSD 7 Ted ----- Original Message ----- From: "jekillen" <jekillen@prodigy.net> To: "FreeBSD Mailing List" <freebsd-questions@freebsd.org> Sent: Monday, February 19, 2007 8:21 PM Subject: Enet driver for Marvell > Hello; > A while ago, a matter of a few months I inquired of this list regarding > installation of FreeBSD v6.0 on ASUS M2N32 WS Pro motherboard. > I was not able to set up dual ethenet inter faces as the only option > presented by sysinstall when configuring enet interface was > fw30 as firewire ethernet emulation. I was advise to upgrade to v6.2 > which I have just done. I still do not have more than the fwe interface > presented. > The response to the original message, I can not find, but I was told > that the motherboard was probably one with new Marvell interfaces. > Now, I have looked at the features listed on the motherboard package > and there it is; > 2x Marvell 88E1116 PHY > Is there a driver that has to be activated by kernel config setting or > what is the status of support for this hardware in FreeBSD? > I just looked through the supported hardware/ethernet devices for > the i386 architecture and did not find any reference to Marvell. > I purchase a cd set of v6.2 cds from FreeBSD Mall (not inplying > any criticism, just that it represents a method of contribution to > this project). > This is frustrating because this machine is supposed to be a production > web server. Hardware including dual 15K SCSI drives and adapter has run > in the neighborhood of $1000 and it still is not useful for it' > intended purpose > Any info or advice appreciated > Thanks in advance; > Jeff K > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?013301c75644$c5dcb850$3c01a8c0>