Date: Thu, 10 Jan 2002 14:16:22 -0500 From: "Joe & Fhe Barbish" <barbish@a1poweruser.com> To: "Brian Somers" <brian@freebsd-services.com> Cc: "FBSD Questions" <questions@FreeBSD.ORG> Subject: RE: pam_authenticate:conversion error Message-ID: <LPBBIGIAAKKEOEJOLEGOEEACCMAA.barbish@a1poweruser.com> In-Reply-To: <200201101740.g0AHeK003086@hak.lan.Awfulhak.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Brian,
Here is the documentation you requested on the problem.
The info from ppp.log
Jan 10 13:39:33 gateway ppp[230]: Phase: Using interface: tun1
Jan 10 13:39:33 gateway ppp[230]: Phase: deflink: Created in closed state
Jan 10 13:39:34 gateway ppp[230]: tun1: Command: default: set speed 115200
Jan 10 13:39:34 gateway ppp[230]: tun1: Command: default: set timeout 0
Jan 10 13:39:34 gateway ppp[230]: tun1: Command: default: disable pred1
deflate lqr
Jan 10 13:39:34 gateway ppp[230]: tun1: Command: default: deny pred1 deflate
lqr
Jan 10 13:39:34 gateway ppp[230]: tun1: Phase: PPP Started (interactive
mode).
Jan 10 13:39:56 gateway ppp[230]: tun1: Command: /dev/tty: show timer
Jan 10 13:40:15 gateway ppp[230]: tun1: Command: /dev/tty: show timer
Jan 10 13:40:25 gateway ppp[230]: tun1: Command: /dev/tty: show lcp
Jan 10 13:40:56 gateway ppp[230]: tun1: Command: /dev/tty: show datalink
Jan 10 13:41:19 gateway ppp[230]: tun1: Command: /dev/tty: show physical
Jan 10 13:41:44 gateway ppp[230]: tun1: Command: /dev/tty: show bundle
Jan 10 13:42:00 gateway ppp[230]: tun1: Command: /dev/tty: show timer
Jan 10 13:42:10 gateway ppp[230]: tun1: Command: /dev/tty: quit
Jan 10 13:42:10 gateway ppp[230]: tun1: Phase: PPP Terminated (normal).
Console log
Script started on Thu Jan 10 13:36:42 2002
This is what is running after booting the system and before dialin
gateway# ps ax
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? ILs 0:00.02 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.00 (bufdaemon)
5 ?? DL 0:00.01 (syncer)
108 ?? Ss 0:00.04 /usr/sbin/ppp -quiet -ddial dialisp
144 ?? Is 0:00.00 /sbin/natd -dynamic -n tun0
162 ?? Is 0:00.13 /usr/sbin/syslogd -s
181 ?? Is 0:00.01 /usr/sbin/inetd -wW
183 ?? Is 0:00.01 /usr/sbin/cron
201 ?? Is 0:00.00 moused -p /dev/psm0 -t auto
219 ?? I 0:00.01 /usr/libexec/getty std.115200 ttyd2
223 p0 Ss 0:00.03 /bin/csh -i
225 p0 R+ 0:00.00 ps ax
211 v0 Is 0:00.04 login -p root
220 v0 S 0:00.04 -csh (csh)
222 v0 S+ 0:00.01 script -k /custom/pam_error
212 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1
213 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2
214 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3
215 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4
216 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5
217 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6
218 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7
From winbox started dialin and inbound call is hung
pam_authenticate : conversion error
mesg can out here but script did not catch it
gateway# pss ax
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? ILs 0:00.02 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.00 (bufdaemon)
5 ?? DL 0:00.01 (syncer)
108 ?? Ss 0:00.08 /usr/sbin/ppp -quiet -ddial dialisp
144 ?? Is 0:00.00 /sbin/natd -dynamic -n tun0
162 ?? Ss 0:00.13 /usr/sbin/syslogd -s
181 ?? Is 0:00.01 /usr/sbin/inetd -wW
183 ?? Ss 0:00.01 /usr/sbin/cron
201 ?? Is 0:00.00 moused -p /dev/psm0 -t auto
223 p0 Ss 0:00.04 /bin/csh -i
229 p0 R+ 0:00.00 ps ax
211 v0 Is 0:00.04 login -p root
220 v0 I 0:00.04 -csh (csh)
222 v0 S+ 0:00.02 script -k /custom/pam_error
212 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1
213 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2
214 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3
215 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4
216 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5
217 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6
218 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7
219 d2 I<s+ 0:00.03 login -p (gateway.xxxxxx.com) (ttyd2)
gateway# ppp
Working in interactive mode
Using interface: tun1
ppp ON gateway> show timer
ppp ON gateway> show timer
ppp ON gateway> show lcp
deflink: LCP [Initial]
his side: MRU 1500, ACCMAP ffffffff, PROTOCOMP off, ACFCOMP off,
MAGIC 00000000, MRRU 0, SHORTSEQ off, REJECT 0000
my side: MRU 1500, ACCMAP 00000000, PROTOCOMP on, ACFCOMP on,
MAGIC 117332f3, MRRU 0, SHORTSEQ off, REJECT 0000
Defaults: MRU = any (max 2048), MTU = any (max 2048), ACCMAP = 00000000
LQR period = 30s, Open Mode = active (delay 1s)
FSM retry = 3s, max 5 Config REQs, 5 Term REQs
Ident:
Negotiation:
ACFCOMP = enabled & accepted
CHAP = disabled & accepted
CHAP80 = disabled & accepted
LANMan = disabled & denied
CHAP81 = disabled & accepted
LQR = disabled & denied
PAP = disabled & accepted
PROTOCOMP = enabled & accepted
ppp ON gateway> show datalink
Name: deflink
State: closed
Peer name: N/A
Discriminator: Null Class
Defaults:
Phone List:
Dial tries: 1, delay 3s/30s
Reconnect tries: 0, delay 3s
Callback requested: none
Dial Script:
Login Script:
Logout Script:
Hangup Script:
ppp ON gateway> show physical
Name: deflink
State: closed
Device: N/A
Link Type: interactive
Connect Count: 0
Queued Packets: 0
Phone Number: N/A
Defaults:
Device List: "/dev/cuaa1", "/dev/cuaa0"
Characteristics: 115200bps, cs8, no parity, CTS/RTS on
CD check delay: device specific
Connect time: 0:00:00
0 octets in, 0 octets out
0 packets in, 0 packets out
Overall 0 bytes/sec
ppp ON gateway> show bundle
Phase Dead
Device: /dev/tun1
Interface: tun1 @ 0bps
Queued: 0 of 30
Defaults:
Label:
Auth name:
Diagnostic socket: none
Choked Timer: 120s
Radius config: none (not authenticated)
Idle Timer: disabled
sendpipe: unspecified recvpipe: unspecified
Sticky Routes: enabled Filter Decap: disabled
ID check: enabled Keep-Session: disabled
Loopback: enabled PasswdAuth: disabled
Proxy: disabled Proxyall: disabled
TCPMSS Fixup: enabled Throughput: enabled
Utmp Logging: enabled Iface-Alias: disabled
ppp ON gateway> show timer
ppp ON gateway> quit
gateway# ps ax
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? ILs 0:00.02 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.00 (bufdaemon)
5 ?? DL 0:00.02 (syncer)
108 ?? Ss 0:00.13 /usr/sbin/ppp -quiet -ddial dialisp
144 ?? Ss 0:00.00 /sbin/natd -dynamic -n tun0
162 ?? Ss 0:00.14 /usr/sbin/syslogd -s
181 ?? Is 0:00.01 /usr/sbin/inetd -wW
183 ?? Ss 0:00.01 /usr/sbin/cron
201 ?? Is 0:00.00 moused -p /dev/psm0 -t auto
223 p0 Ss 0:00.04 /bin/csh -i
234 p0 R+ 0:00.00 ps ax
211 v0 Is 0:00.04 login -p root
220 v0 I 0:00.04 -csh (csh)
222 v0 S+ 0:00.04 script -k /custom/pam_error
212 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1
213 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2
214 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3
215 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4
216 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5
217 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6
218 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7
219 d2 I<s+ 0:00.03 login -p (gateway.a1poweruser.com) (ttyd2)
gateway# kill -9 219
gateway# ps ax
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? SLs 0:00.02 /sbin/init --
2 ?? DL 0:00.00 (pagedaemon)
3 ?? DL 0:00.00 (vmdaemon)
4 ?? DL 0:00.00 (bufdaemon)
5 ?? DL 0:00.02 (syncer)
108 ?? Ss 0:00.14 /usr/sbin/ppp -quiet -ddial dialisp
144 ?? Is 0:00.00 /sbin/natd -dynamic -n tun0
162 ?? Is 0:00.14 /usr/sbin/syslogd -s
181 ?? Is 0:00.01 /usr/sbin/inetd -wW
183 ?? Is 0:00.01 /usr/sbin/cron
201 ?? Is 0:00.00 moused -p /dev/psm0 -t auto
235 ?? S 0:00.01 /usr/libexec/getty std.115200 ttyd2
223 p0 Ss 0:00.05 /bin/csh -i
236 p0 R+ 0:00.00 ps ax
211 v0 Is 0:00.04 login -p root
220 v0 I 0:00.04 -csh (csh)
222 v0 S+ 0:00.04 script -k /custom/pam_error
212 v1 Is+ 0:00.01 /usr/libexec/getty Pc ttyv1
213 v2 Is+ 0:00.01 /usr/libexec/getty Pc ttyv2
214 v3 Is+ 0:00.01 /usr/libexec/getty Pc ttyv3
215 v4 Is+ 0:00.01 /usr/libexec/getty Pc ttyv4
216 v5 Is+ 0:00.01 /usr/libexec/getty Pc ttyv5
217 v6 Is+ 0:00.01 /usr/libexec/getty Pc ttyv6
218 v7 Is+ 0:00.01 /usr/libexec/getty Pc ttyv7
gateway# exit
Script done on Thu Jan 10 13:43:53 2002
-----Original Message-----
From: Brian Somers [mailto:brian@freebsd-services.com]
Sent: Thursday, January 10, 2002 12:40 PM
To: Joe & Fhe Barbish
Cc: Brian Somers; FBSD Questions
Subject: Re: pam_authenticate:conversion error
> Brian
> Now that I have the callback thing out of the way,
> I have a related bug.
> The first time dialing in to the FBSD server after
> a boot, each user gets Pam_authenticate : conversion
> error followed by 8 to 10 stray irq 7 messages.
> The winbox dialer gets a error 608 machine you are
> trying to connect can not be reached.
> The FBSD server ppp -direct incoming task is still
> there hung as seen with ps ax.
> The only way to clear is to kill -9 task#.
> Every following time I login and callback with no problems.
> Any ideas about correcting this?
Ah, yes, you mentioned this before didn't you ? Is this the ppp
that's hung but accepts pppctl connections ?
If so, can you send me the output of ``show timer'' twice (with a
few second time gap in between, ``show lcp'', ``show datalink'',
``show physical'', ``show bundle''.
Could you also put ``set log tun command phase lcp ipcp chat'' at the
start of the incoming configuration profile and send me the ppp.log
output ?
Cheers.
> Thanks
> Joe
--
Brian <brian@freebsd-services.com> <brian@Awfulhak.org>
http://www.freebsd-services.com/ <brian@[uk.]FreeBSD.org>
Don't _EVER_ lose your sense of humour ! <brian@[uk.]OpenBSD.org>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LPBBIGIAAKKEOEJOLEGOEEACCMAA.barbish>