Date: Fri, 26 Nov 1999 01:35:45 +0100 (MET) From: Gerard Roudier <groudier@club-internet.fr> To: Wilko Bulte <wilko@yedi.iaf.nl> Cc: cdillon@wolves.k12.mo.us, roberto@keltia.freenix.fr, scsi@FreeBSD.ORG Subject: Re: NEWS: SYM53C1010 and Ultra3 support Message-ID: <Pine.LNX.3.95.991126013010.1811A-100000@localhost> In-Reply-To: <199911252040.VAA02381@yedi.iaf.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, I may have misunderstood your report in my previous reply. If you mean that the sym driver detected a 810A that is in fact=20 a normal 810, then I fully understand the driver failure. Will try to understand the cause of the problem to-morrow evening. Thanks for the report. G=E9rard. On Thu, 25 Nov 1999, Wilko Bulte wrote: > Being curious I put the sym into -current on the Alpha box and got: >=20 > EB64+ > Alpha 21064A Evaluation Board 274 MHz, 274MHz > 8192 byte page size, 1 processor. > CPU: EV45 (21064A) major=3D6 minor=3D2 > OSF PAL rev: 0x100070002012d > real memory =3D 132136960 (129040K bytes) > avail memory =3D 122773504 (119896K bytes) > Preloaded elf kernel "kernel" at 0xfffffc00005e6000. > pci0: <PCI bus> on pcib0 > sym0: <810a> irq 7 at device 5.0 on pci0 > sym0: No NVRAM, ID 7, Fast-10, parity checking > CACHE TEST FAILED: script execution failed. > start=3D47c625c8, pc=3D47c625d4, end=3D47c625e8 > sym0: CACHE INCORRECTLY CONFIGURED. > device_probe_and_attach: sym0 attach returned 6 > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> irq 1 at device 7.0 on pci0 > isp0: interrupting at APECS irq 1 >=20 > So, I do have an ncr810a chip after all embedded on this Alpha mainboard.= =20 > My other PCI Alpha is on loan to another FreeBSD developer=20 > (of sigset fame ;-) so I can't check that one.=20 >=20 > After spending some time digging in my equipment stock I found a=20 > original NCR-built PCI card. Installing that gives me: >=20 > sym1: <810a> irq 1 at device 7.0 on pci0 > sym1: No NVRAM, ID 7, Fast-10, parity checking > CACHE TEST FAILED: script execution failed. > start=3D47c625c8, pc=3D47c625d4, end=3D47c625e8 > sym1: CACHE INCORRECTLY CONFIGURED. > device_probe_and_attach: sym1 attach returned 6 >=20 > In both cases there are no devices connect to the SCSI buses that the > sym driver controls. >=20 > Cheers, >=20 > Wilko To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.95.991126013010.1811A-100000>