Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Sep 2004 09:05:01 +0930
From:      Benjamin Close <cisbjc@cs.unisa.edu.au>
To:        Ben Stuyts <ben@stuyts.com>
Cc:        current@freebsd.org
Subject:   Re: atacontrol rebuild, how?
Message-ID:  <41365CA5.2000300@cs.unisa.edu.au>
In-Reply-To: <D4E7074A-FC26-11D8-B7F3-000A959CFF76@stuyts.com>
References:  <D4E7074A-FC26-11D8-B7F3-000A959CFF76@stuyts.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Perhaps something worth trying is the following - It's what I have to do 
to get the promisc card I use to rebuild:

    - Identify the channel the drive is on (ie ad6 on ata3)

atacontrol detach ata3
atacontrol attach ata3
atacontrol addspare ar0 ad6
atacontrol rebuild

The command exits straight away but if you run: atacontrol status ar0
I get a 'REBUILDING 0%' message

Also checking the ps output shows a rebuild thread.

Might work, for you.

Cheers,
    Benjamin

Ben Stuyts wrote:

> Hi,
>
> I have installed beta-2 (31082004) on a Supermicro 5013C-T (P4SCE 
> motherboard with ICH5R, and two WD 74 GB Raptor SATA drives, which I 
> want to mirror).
>
> I know the ICH5R is not a real raid controller, but I'm trying to get 
> it to work using atacontrol and the built-in RAID1 support.
>
> Using the procedure described in 
> http://www.techno-obscura.com/~delgado/notes/fbsd-ich5SATAraid.html 
> (thanks!) I managed to get FreeBSD installed on RAID1 on ar0.
>
> Next I tried to remove a drive (atacontrol detach), and even zeroed 
> the first area of the disk. After reattaching the drive, I cannot get 
> atacontrol to rebuild the drive. If I do atacontrol rebuild ar0, it 
> does absolutely nothing. From browsing this mailing list I see that 
> this seems to be a problem with using non-raid controllers, but will 
> this be improved in the future? Or am I doing something wrong?
>
> What other options do I have? Is geom-vinum ready for this? All I want 
> is a fully mirrored system (incl root and swap).
>
> I could put a simple raid controller in, like the Promise S150 TX2Plus 
> or TX4, but if I can get it to work with the ICH5R controller that 
> would be great.
>
> Thanks,
> Ben
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to 
> "freebsd-current-unsubscribe@freebsd.org"



-- 
3D Research Associate / System Administrator     +61 8 8302 3669
School of Computer and Information Science       Room D1-07, ML Campus
University of South Australia                    Mawson Lakes Blvd.
Benjamin.Close@cs.unisa.edu.au                   South Australia, 5095
F00D C83D 5F7E 5561 DF91  B74D E602 CAA3 4842 B5B4



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41365CA5.2000300>