Date: Thu, 10 Oct 2019 13:36:31 +0200 (CEST) From: Ronald Klop <ronald-lists@klop.ws> To: Warner Losh <imp@bsdimp.com> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>, "freebsd-arch@freebsd.org" <freebsd-arch@freebsd.org> Subject: Re: firm date: armv5 support removal scheduled for 2019-12-31 Message-ID: <829263445.69.1570707391813@localhost> In-Reply-To: <CANCZdfoYJ342=Ej_Ha39JMHwZhaeyPn2YfW9mzYR%2BGss58N6nA@mail.gmail.com> References: <CANCZdfoYJ342=Ej_Ha39JMHwZhaeyPn2YfW9mzYR%2BGss58N6nA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Axe it! See mails from may/june "boot 11.3-BETA1 hangs om armv5". This did not boot on my Sheevaplug. I stopped trying. A new RPI is cheaper than one hour of work on armv5. But it was fun while it worked. :-) Thanks. Regards, Ronald. Van: Warner Losh <imp@bsdimp.com> Datum: woensdag, 9 oktober 2019 23:40 Aan: "freebsd-arch@freebsd.org" <freebsd-arch@freebsd.org>, "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Onderwerp: firm date: armv5 support removal scheduled for 2019-12-31 > > Greetings, > > There's been much talk of removing armv5 support from FreeBSD in FreeBSD > 13. This talk has been ongoing since before 12 was branched among the key > arm developers. The compromise for the FreeBSD 12 was to have one final > FreeBSD armv5 release for a few straggling users that needed (or think they > needed) this release and it would be removed before FreeBSD 13. > > The reason to remove this is due to the increased burden armv5 has > presented on the system. We have a separate pmap for v5 which has known or > suspected bugs relating to unaligned I/O. No developers have the armv5 > boards in service anymore. They have ceased being relevant to FreeBSD's > success with the plethera of armv7 boards that are on the market. No new > armv5 boards have been made in a long time. The FreeBSD project hasn't > produce armv5 binaries for 12.x at all (the binaries produced earlier could > not have possibly booted, though the userland binaries worked if you could > otherwise install the system). Finally, llvm's lld doesn't support armv5. > It would ease integration if we didn't have to worry about a fallback for > armv5. It would be one fewer dependency on the old binutils toolchain in > the tree. > > So, taking all these things together, the time has come to schedule removal > of armv5 support from FreeBSD. The end of the year seems like a good date > to select for planning this removal, getting whatever notices should be put > into place and warning people about the next release in the most formal way > possible (more informal warnings have been going on for over a year, > starting with armv4 support removal in 12). > > I'm posting this now to gather feedback and, if necessary, create a > checklist of things to do before removal. > > Warner > _______________________________________________ > freebsd-arm@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > > > From owner-freebsd-arm@freebsd.org Fri Oct 11 10:50:57 2019 Return-Path: <owner-freebsd-arm@freebsd.org> Delivered-To: freebsd-arm@mailman.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mailman.nyi.freebsd.org (Postfix) with ESMTP id 7234B147D12 for <freebsd-arm@mailman.nyi.freebsd.org>; Fri, 11 Oct 2019 10:50:57 +0000 (UTC) (envelope-from maciphone2@googlemail.com) Received: from n6.nabble.com (n6.nabble.com [162.255.23.37]) by mx1.freebsd.org (Postfix) with ESMTP id 46qPrJ5Bm0z4Lsy for <freebsd-arm@freebsd.org>; Fri, 11 Oct 2019 10:50:56 +0000 (UTC) (envelope-from maciphone2@googlemail.com) Received: from n6.nabble.com (localhost [127.0.0.1]) by n6.nabble.com (Postfix) with ESMTP id 6629F11C82212 for <freebsd-arm@freebsd.org>; Fri, 11 Oct 2019 03:45:20 -0700 (MST) Date: Fri, 11 Oct 2019 03:45:20 -0700 (MST) From: =?UTF-8?Q?Klaus_K=C3=BCchemann?= <maciphone2@googlemail.com> To: freebsd-arm@freebsd.org Message-ID: <1570790720416-0.post@n6.nabble.com> In-Reply-To: <20190925124305.3ada7b327cf73dcb611ec074@bidouilliste.com> References: <20190916064640.GN96402@funkthat.com> <20190924221308.GX96402@funkthat.com> <D27B4CCA-3E30-4212-A973-12DB52A8FCDE@mko.io> <20190925124305.3ada7b327cf73dcb611ec074@bidouilliste.com> Subject: Re: RockPro64 booting w/ u-boot v2019-rc3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable X-Rspamd-Queue-Id: 46qPrJ5Bm0z4Lsy X-Spamd-Bar: ++++++ X-Spamd-Result: default: False [7.00 / 15.00]; ARC_NA(0.00)[]; GREYLIST(0.00)[pass,body]; FROM_HAS_DN(0.00)[]; DMARC_POLICY_QUARANTINE(1.50)[googlemail.com : No valid SPF, No valid DKIM,quarantine]; FREEMAIL_FROM(0.00)[googlemail.com]; TO_MATCH_ENVRCPT_ALL(0.00)[]; MIME_GOOD(-0.10)[text/plain]; PREVIOUSLY_DELIVERED(0.00)[freebsd-arm@freebsd.org]; TO_DN_NONE(0.00)[]; R_SPF_SOFTFAIL(0.00)[~all]; RCPT_COUNT_ONE(0.00)[1]; NEURAL_SPAM_MEDIUM(1.00)[0.998,0]; IP_SCORE(0.00)[ip: (0.66), ipnet: 162.255.20.0/22(0.23), asn: 21624(0.04), country: US(-0.05)]; VIOLATED_DIRECT_SPF(3.50)[]; NEURAL_SPAM_LONG(1.00)[1.000,0]; RCVD_IN_DNSWL_NONE(0.00)[37.23.255.162.list.dnswl.org : 127.0.10.0]; IP_SCORE_FREEMAIL(0.00)[]; RCVD_NO_TLS_LAST(0.10)[]; FROM_EQ_ENVFROM(0.00)[]; R_DKIM_NA(0.00)[]; MIME_TRACE(0.00)[0:+]; ASN(0.00)[asn:21624, ipnet:162.255.20.0/22, country:US]; RCVD_COUNT_TWO(0.00)[2]; FREEMAIL_ENVFROM(0.00)[googlemail.com] X-Spam: Yes X-BeenThere: freebsd-arm@freebsd.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: "Porting FreeBSD to ARM processors." <freebsd-arm.freebsd.org> List-Unsubscribe: <https://lists.freebsd.org/mailman/options/freebsd-arm>, <mailto:freebsd-arm-request@freebsd.org?subject=unsubscribe> List-Archive: <http://lists.freebsd.org/pipermail/freebsd-arm/>; List-Post: <mailto:freebsd-arm@freebsd.org> List-Help: <mailto:freebsd-arm-request@freebsd.org?subject=help> List-Subscribe: <https://lists.freebsd.org/mailman/listinfo/freebsd-arm>, <mailto:freebsd-arm-request@freebsd.org?subject=subscribe> X-List-Received-Date: Fri, 11 Oct 2019 10:50:57 -0000 Hi, FreeBSD-13.0-CURRENT-arm64-aarch64-20191004-r353072-memstick.img -- U-Boot TPL 2019.10 (Oct 08 2019 - 07:58:06) Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2019.10 (Oct 08 2019 - 07:58:06 +0000) Trying to boot from MMC1 U-Boot 2019.10 (Oct 08 2019 - 07:58:06 +0000) Model: Pine64 RockPro64 DRAM: 2 GiB << error/it`s the 4GB-model !!!>>>>>>> MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0 Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment = =20 Consoles: EFI console = =20 Reading loader env vars from /efi/freebsd/loader.env = =20 Setting currdev to disk0p1: = =20 FreeBSD/arm64 EFI loader, Revision 1.1 = =20 (Fri Oct 4 02:56:02 UTC 2019 root@releng1.nyi.freebsd.org) = =20 rockchip_dnl_key_pressed: adc_channel_single_shot fail! = =20 Command line arguments: loader.efi = =20 EFI version: 2.80autoboot: 0 = =20 EFI Firmware: Das U-Boot (rev 8217.4096) = =20 Console: efi (0)s #0, OK = =20 Load Path: /efi\boot\bootaa64.efi = =20 Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GP T,ddd7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418)efi = =20 Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GPT,dd d7d28e-e677-11e9-a9eb-002590ec5bf2,0x3,0x10418) = =20 Setting currdev to disk0p1:tage select! = =20 Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(2,GPT,ddd7d2 8e-e677-11e9-a9eb-002590ec5bf2,0x1041b,0x1ebe80) = =20 Setting currdev to disk0p2: = =20 Loading /boot/defaults/loader.conf = =20 Loading /boot/device.hintsoad any image = =20 Loading /boot/loader.confs (18.9 MiB/s) = =20 Loading /boot/loader.conf.localERR_BADMAGIC = =20 \ |_| |_| \___|\___||____/|_____/|_____/ = =20 ``` = =20 ` =20 =C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2We= lcome to FreeBSD=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3= =A2=C3=A2=C3=A2=C3=A2? s` `.....---.......--.``` =20 -/ =20 =C3=A2 =C3=A2? +o .--` = /y:` =20 +. =20 =C3=A2 1. Boot Multi user [Enter] =C3=A2? yo`:. = :o =20 `+- =20 =C3=A2 2. Boot Single user =C3=A2? y/ = -/` -o/ =20 =C3=A2 3. Escape to loader prompt =C3=A2? .- = =20 ::/sy+:. =20 =C3=A2 4. Reboot =C3=A2? / = `--=20 / =20 =C3=A2 =C3=A2? `: = =20 :` =20 =C3=A2? Options: =C3=A2? `: = =20 :` =20 =C3=A2? 5. Kernel: default/kernel (1 of 1) =C3=A2? / = =20 / =20 =C3=A2? 6. Boot Options =C3=A2? .- = =20 -. =20 =C3=A2? =C3=A2? -- = -. =20 =C3=A2? =C3=A2? `:` = `:` =20 =C3=A2? =C3=A2? .-- = `--. =20 =C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2= =C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3= =A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2= =C3=A2=C3=A2=C3=A2=C3=A2=C3=A2=C3=A2? .---.....----. =20 Autoboot in 0 seconds, hit [Enter] to boot or any other key to stop = =20 Loading kernel... = =20 /boot/kernel/kernel text=3D0x958e8c data=3D0x196020+0x7785c4 syms=3D[0x8+0x13d3d0+0x8+ 0x129037] = =20 Loading configured modules... = =20 can't find '/boot/entropy' = =20 Using DTB provided by EFI at 0x80ec000. = =20 ---<<BOOT>>--- = =20 KDB: debugger backends: ddb = =20 KDB: current backend: ddb = =20 Copyright (c) 1992-2019 The FreeBSD Project. = =20 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 = =20 The Regents of the University of California. All rights reserved. = =20 FreeBSD is a registered trademark of The FreeBSD Foundation. = =20 FreeBSD 13.0-CURRENT #0 r353072: Fri Oct 4 03:32:10 UTC 2019 = =20 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm4 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.) WARNING: WITNESS option enabled, expect reduced performance. = =20 VT: init without driver. = =20 module firmware already present! = =20 Starting CPU 1 (1) = =20 Starting CPU 2 (2) = =20 Starting CPU 3 (3) = =20 Starting CPU 4 (100) = =20 Starting CPU 5 (101) = =20 FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs = =20 arc4random: WARNING: initial seeding bypassed the cryptographic random device b. random: entropy device external interface = =20 MAP 7cf1d000 mode 2 pages 1 = =20 MAP 7cf26000 mode 2 pages 1 = =20 MAP 7ff40000 mode 2 pages 16 = =20 kbd0 at kbdmux0 = =20 ofwbus0: <Open Firmware Device Tree> = =20 clk_fixed0: <Fixed clock> on ofwbus0 = =20 simplebus0: <Flattened device tree simple bus> on ofwbus0 = =20 rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on ofwbus0=20 rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 0xff750000-0xff70 rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 0xff760000-0xff760fff o0 rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on ofwbus0=20 clk_fixed1: <Fixed clock> on ofwbus0 = =20 regfix0: <Fixed Regulator> on ofwbus0 = =20 regfix1: <Fixed Regulator> on ofwbus0 = =20 regfix2: <Fixed Regulator> on ofwbus0 = =20 regfix3: <Fixed Regulator> on ofwbus0 = =20 regfix4: <Fixed Regulator> on ofwbus0 = =20 regfix5: <Fixed Regulator> on ofwbus0 = =20 regfix6: <Fixed Regulator> on ofwbus0 = =20 regfix7: <Fixed Regulator> on ofwbus0 = =20 simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 0xff310000-0xff310ff= f on0 psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 = =20 gic0: <ARM Generic Interrupt Controller v3.0> mem 0xfee00000-0xfee0ffff,0xfef000 its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff on gic0=20 rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0 = =20 gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 65 on rk_p0 gpiobus0: <OFW GPIO bus> on gpio0 = =20 gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 66 on rk_p0 gpiobus1: <OFW GPIO bus> on gpio1 = =20 gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 67 on rk_p0 gpiobus2: <OFW GPIO bus> on gpio2 = =20 gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 68 on rk_p0 gpiobus3: <OFW GPIO bus> on gpio3 = =20 gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 69 on rk_p0 gpiobus4: <OFW GPIO bus> on gpio4 = =20 rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0 = =20 iicbus0: <OFW I2C bus> on rk_i2c0 = =20 rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0 = =20 iicbus1: <OFW I2C bus> on rk_i2c1 = =20 rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0 = =20 iicbus2: <OFW I2C bus> on rk_i2c2 = =20 syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2 = =20 rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0 = =20 iicbus3: <OFW I2C bus> on rk_i2c3 = =20 rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 70 on iicbus2 = =20 generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0 = =20 Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 = =20 Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 = =20 rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1= =20 rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on rk_grf1= =20 rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on rk_grf= 1 =20 cpulist0: <Open Firmware CPU Group> on ofwbus0 = =20 cpu0: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt0: <Generic cpufreq driver> on cpu0 = =20 cpu1: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt1: <Generic cpufreq driver> on cpu1 = =20 cpu2: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt2: <Generic cpufreq driver> on cpu2 = =20 cpu3: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt3: <Generic cpufreq driver> on cpu3 = =20 cpu4: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt4: <Generic cpufreq driver> on cpu4 = =20 cpu5: <Open Firmware CPU> on cpulist0 = =20 cpufreq_dt5: <Generic cpufreq driver> on cpu5 = =20 dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff irq = 9 on0 miibus0: <MII bus> on dwc0 = =20 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0 = =20 rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, o rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 = =20 rgephy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, o dwc0: Ethernet address: 3e:e5:c3:24:6e:90 = =20 rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller (RockChip)0 rockchip_dwmmc0: Hardware version ID is 270a = =20 mmc0: <MMC/SD bus> on rockchip_dwmmc0 = =20 sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 0xfe330000-0xfe33fff= f ir0 rk_emmcphy0: got emmcclk clock = =20 sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, setting BRO. sdhci_fdt0: 1 slot(s) allocated = =20 mmc1: <MMC/SD bus> on sdhci_fdt0 = =20 ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on ofwbus= 0 =20 ehci0: Could not set phy to host mode = =20 panic: lock 0xffff0000413bb140 is not initialized = =20 cpuid =3D 0 = =20 time =3D 1 = =20 KDB: stack backtrace: = =20 db_trace_self() at db_trace_self_wrapper+0x28 = =20 pc =3D 0xffff00000071e7b8 lr =3D 0xffff000000106224 = =20 sp =3D 0xffff000000010530 fp =3D 0xffff000000010740 = =20 = =20 db_trace_self_wrapper() at vpanic+0x18c = =20 pc =3D 0xffff000000106224 lr =3D 0xffff0000003ff2bc = =20 sp =3D 0xffff000000010750 fp =3D 0xffff000000010800 = =20 = =20 vpanic() at panic+0x44 = =20 pc =3D 0xffff0000003ff2bc lr =3D 0xffff0000003ff06c = =20 sp =3D 0xffff000000010810 fp =3D 0xffff000000010890 = =20 = =20 panic() at lock_destroy+0x44 = =20 pc =3D 0xffff0000003ff06c lr =3D 0xffff000000447ffc = =20 sp =3D 0xffff0000000108a0 fp =3D 0xffff0000000108b0 = =20 = =20 lock_destroy() at usb_bus_mem_free_all+0x34 = =20 pc =3D 0xffff000000447ffc lr =3D 0xffff000000288314 = =20 sp =3D 0xffff0000000108c0 fp =3D 0xffff0000000108d0 = =20 = =20 usb_bus_mem_free_all() at generic_ehci_detach+0xb8 = =20 pc =3D 0xffff000000288314 lr =3D 0xffff00000075f418 = =20 sp =3D 0xffff0000000108e0 fp =3D 0xffff000000010900 = =20 = =20 generic_ehci_detach() at generic_ehci_fdt_detach+0x1c = =20 pc =3D 0xffff00000075f418 lr =3D 0xffff00000075f800 = =20 sp =3D 0xffff000000010910 fp =3D 0xffff000000010950 = =20 = =20 generic_ehci_fdt_detach() at generic_ehci_fdt_attach+0x26c = =20 pc =3D 0xffff00000075f800 lr =3D 0xffff00000075f7a0 = =20 sp =3D 0xffff000000010960 fp =3D 0xffff0000000109b0 = =20 = =20 generic_ehci_fdt_attach() at device_attach+0x3ec = =20 pc =3D 0xffff00000075f7a0 lr =3D 0xffff000000434d2c = =20 sp =3D 0xffff0000000109c0 fp =3D 0xffff000000010a10 = =20 = =20 device_attach() at device_probe_and_attach+0x7c = =20 pc =3D 0xffff000000434d2c lr =3D 0xffff0000004348a8 = =20 sp =3D 0xffff000000010a20 fp =3D 0xffff000000010a40 = =20 = =20 device_probe_and_attach() at bus_generic_new_pass+0xec = =20 pc =3D 0xffff0000004348a8 lr =3D 0xffff000000436930 = =20 sp =3D 0xffff000000010a50 fp =3D 0xffff000000010a80 = =20 = =20 bus_generic_new_pass() at bus_generic_new_pass+0xd0 = =20 pc =3D 0xffff000000436930 lr =3D 0xffff000000436914 = =20 sp =3D 0xffff000000010a90 fp =3D 0xffff000000010ac0 = =20 = =20 bus_generic_new_pass() at bus_generic_new_pass+0xd0 = =20 pc =3D 0xffff000000436914 lr =3D 0xffff000000436914 = =20 sp =3D 0xffff000000010ad0 fp =3D 0xffff000000010b00 = =20 = =20 bus_generic_new_pass() at bus_set_pass+0x8c = =20 pc =3D 0xffff000000436914 lr =3D 0xffff000000432408 = =20 sp =3D 0xffff000000010b10 fp =3D 0xffff000000010b40 = =20 = =20 bus_set_pass() at mi_startup+0x238 = =20 pc =3D 0xffff000000432408 lr =3D 0xffff000000398ad4 = =20 sp =3D 0xffff000000010b50 fp =3D 0xffff000000010bb0 = =20 = =20 mi_startup() at virtdone+0x54 = =20 pc =3D 0xffff000000398ad4 lr =3D 0xffff000000001084 = =20 sp =3D 0xffff000000010bc0 fp =3D 0x0000000000000000 = =20 = =20 KDB: enter: panic = =20 [ thread pid 0 tid 100000 ] = =20 Stopped at 0 = =20 db> help = =20 This is ddb(4), the kernel debugger; see https://man.FreeBSD.org/ddb/4 for help. Use "bt" for backtrace, "dump" for kernel core dump, "reset" to reboot. = =20 Available commands: = =20 acttrace alltrace b break = =20 bt c call capture = =20 continue countfreebufs d delete = =20 dhwatch dump dwatch examine = =20 findstack gdb halt hwatch = =20 kill kldstat match next = =20 p panic pci_clearerr print = =20 ps reboot reset run = =20 s script scripts search = =20 set show step sysctl = =20 t textdump thread trace = =20 unscript until w watch = =20 watchdog where write x = =20 = =20 The following have subcommands; append "help" to list (e.g. "show help"): = =20 show = =20 db>=20 ----- Regards=20 Klaus -- Sent from: http://freebsd.1045724.x6.nabble.com/freebsd-arm-f4199244.html
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?829263445.69.1570707391813>