Date: Sat, 24 Sep 2005 04:33:21 -0700 From: aksis <aksis@idea-anvil.net> To: freebsd-questions@freebsd.org Subject: Re: New user getting very discouraged with IPv6 problems, cannot get tunnel working completely :( Message-ID: <200509240433.22883.aksis@idea-anvil.net> In-Reply-To: <1b62a73905092313082d48e984@mail.gmail.com> References: <1b62a73905092313082d48e984@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 23 September 2005 01:08, resonant evil wrote: > > Here are the full tunnel details I was approved for > Server IPV4 Address: 64.71.128.83 <http://64.71.128.83>; > Server IPV6 Address: 2001:470:1F01:FFFF::DD2/127 > Client IPV4 Address: 70.28.MY.IP > Client IPV6 Address: 2001:470:1F01:FFFF::DD3/127 > > in my /etc/rc.conf, I have > > ipv6_enable="YES" > ipv6_gateway_enable="YES" Im using Hurricane Electric as well, When you login to HE they have a link for an example config generation, this is what I used. I had some problems with the handbook as well. My rc.conf: ... snip ... gif_interfaces="gif0 gif1" # IPv6 tunnel gifconfig_gif0="63.226.12.96 64.71.128.82" # IPv4 tunnel for IPv6 tunnel ipv6_enable="YES" # Set to YES to set up for IPv6. ipv6_network_interfaces="rl0 gif0" # List of network interfaces. ipv6_defaultrouter="2001:470:1F00:FFFF::22E" # Set to IPv6 default gateway ipv6_ifconfig_rl0="2001:470:1F00:379::1" # assigned from my /64to a nic ipv6_ifconfig_gif0="2001:470:1F00:FFFF::22F 2001:470:1F00:FFFF::22E prefixlen 128" <--- wrapped, should be on the above line. ... snip ... My Assigned Prefix: 2001:470:1F00:379::/64 # ifconfig gif0 gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 tunnel inet 63.226.12.96 --> 64.71.128.82 inet6 fe80::2c0:f0ff:fe2a:aa7c%gif0 prefixlen 64 scopeid 0x8 inet6 2001:470:1f00:ffff::22f --> 2001:470:1f00:ffff::22e prefixlen 128 Is your firewall blocking ipv6? # /etc/rc.firewall6 open Don't leave this open after you get the tunnel working. > That goes off without any errors or anything, and then that guide tells me > to 'ping6 ff02::1%gif0' and it works perfectly, and I get ping replies, so > I get REALLY excited. Then, the guide tells me to finish by ping their ipv6 end point of the tunnel: # ping6 2001:470:1F01:FFFF::DD2 (you sure its /127 and not /128?) If you don't get replies then there is a problem with the tunnel. > irc'ing an ipv6 server just resolves the IPV6 address but doesn't actually > get past the CONNECTING stage Last I knew, freenode has all HE ipv6 blocked because of abuse. This might have been lifted, I don't use ipv6 for irc.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200509240433.22883.aksis>