From owner-freebsd-mobile Mon Sep 21 18:45:51 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id SAA11756 for freebsd-mobile-outgoing; Mon, 21 Sep 1998 18:45:51 -0700 (PDT) (envelope-from owner-freebsd-mobile@FreeBSD.ORG) Received: from send103.yahoomail.com (send103.yahoomail.com [205.180.60.92]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id SAA11701 for ; Mon, 21 Sep 1998 18:45:35 -0700 (PDT) (envelope-from b_jenkins@yahoo.com) Message-ID: <19980922014558.10362.rocketmail@send103.yahoomail.com> Received: from [207.115.1.169] by send103.yahoomail.com; Mon, 21 Sep 1998 18:45:58 PDT Date: Mon, 21 Sep 1998 18:45:58 -0700 (PDT) From: Brian Jenkins Subject: PCMCIA Controller Not Found To: freebsd-mobile@FreeBSD.ORG MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I have installed FreeBSD 2.2.6 and PAO-980430 on a single board computer with a PCMCIA add-on board. The PCMCIA controller chip is a Cirrus Logic CL-PD6730, but the PCI code is not finding it. I have included the dmesg output below. How can I change the PCI code or my configuration to get it working? Brian Jenkins b_jenkins@yahoo.com ----------------------------------------------------- Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.6-RELEASE #7: Mon Sep 21 14:07:29 CDT 1998 root@x.y.z:/usr/src/sys/compile/MNA Calibrating clock(s) ... i8254 clock: 1193827 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: AMD Am5x86 Write-Back (486-class CPU) Origin = "AuthenticAMD" Id = 0x4f4 Stepping=4 Features=0x1 real memory = 33554432 (32768K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00263000 - 0x01ffdfff, 31043584 bytes (7579 pages) avail memory = 30437376 (29724K bytes) Initializing PC-card drivers: aic ep wlp sio spc wdc ncv stg pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000000c pcibus_setup(1a): mode1res=0x00000001 (0x80000000) pcibus_check: device 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -- nothing found pcibus_setup(1b): mode1res=0x80000000 (0xff000001) pcibus_check: device 0 is there (id=148910b9) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 rev 0 class 60000 on pci0:0:0 vga0 rev 198 class 30000 on pci0:8:0 mapreg[10] type=0 addr=fb000000 size=1000000. pci0: uses 16777216 bytes of memory from fb000000 upto fbffffff. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: BIOS video mode:3 sc0: VGA registers upon power-up 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: video mode:24 sc0: VGA registers in BIOS for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: VGA registers to be used for mode:24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: rows_offset:1 sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not found at 0x3e8 sio3: disabled, not probed. sio4: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached lpt1 at 0x3bc-0x3c3 on isa psm0: current command byte:0065 kbdio: TEST_AUX_PORT status:ffffffff kbdio: DIAGNOSE status:0055 kbdio: TEST_KBD_PORT status:0000 psm0: the aux port is not functioning (-1). psm0 not found at 0x60 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 80MB (163840 sectors), 640 cyls, 8 heads, 32 S/T, 512 B/S wdc0: unit 1 (wd1): wd1: 31MB (64000 sectors), 500 cyls, 8 heads, 16 S/T, 512 B/S wdc1 not found at 0x170 aic0 not found at 0x340 spc0 not found at 0x320 ncv0 not found at 0x320 stg0 not found at 0x320 cnw0 not found at 0x300 ep0 not found at 0x300 wlp0 not found at 0x300 Checking slot 0. PCIC ID = 0xff Checking slot 1. PCIC ID = 0xff Checking slot 2. PCIC ID = 0xff Checking slot 3. PCIC ID = 0xff pcic0 not found at 0x3e0 Checking slot 4. PCIC ID = 0xff Checking slot 5. PCIC ID = 0xff Checking slot 6. PCIC ID = 0xff Checking slot 7. PCIC ID = 0xff pcic1 not found at 0x3e2 Checking slot 4. PCIC ID = 0xff Checking slot 5. PCIC ID = 0xff Checking slot 6. PCIC ID = 0xff Checking slot 7. PCIC ID = 0xff pcic1 not found at 0x3e4 npx0 flags 0x1 on motherboard npx0: INT 16 interface apm0 not found imasks: bio c0004040, tty c003009a, net c003009a BIOS Geometries: 0:027e0720 0..638=639 cylinders, 0..7=8 heads, 1..32=32 sectors 1:01f20710 0..498=499 cylinders, 0..7=8 heads, 1..16=16 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. changing root device to wd0s1a configure() finished. bpf: tun0 attached bpf: sl0 attached bpf: lo0 attached wd0s1: type 0xa5, start 32, end = 163839, size 163808 : OK wd1s1: type 0xa5, start 16, end = 63999, size 63984 : OK _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message