Date: Sat, 11 Feb 2006 14:13:22 -0600 (CST) From: "Robert Uzzi" <ruzzi@compedgeracing.com> To: "Ted Mittelstaedt" <tedm@toybox.placo.com> Cc: freebsd-questions@freebsd.org Subject: RE: SATA Raid Message-ID: <61705.207.70.139.52.1139688802.squirrel@www.compedgeracing.com> In-Reply-To: <LOBBIFDAGNMAMLGJJCKNOEGBFDAA.tedm@toybox.placo.com> References: <61560.207.70.139.52.1139628926.squirrel@www.compedgeracing.com> <LOBBIFDAGNMAMLGJJCKNOEGBFDAA.tedm@toybox.placo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
None of there are relevant since the only add in card is UDMA 100 not SATA different chipsets. The others are built in's and not add in cards. > > Here's some output from 3 of my servers with different ide raid, > judge for yourself: > > Server #1: FreeBSD 6.0, Promise udma raid chip on motherboard: > > www# dmesg > . > . > ad4: 114473MB <Seagate ST3120026A 8.01> at ata2-master UDMA100 > ad6: 114473MB <Seagate ST3120026A 8.01> at ata3-master UDMA100 > Waiting 5 seconds for SCSI devices to settle > ar0: 114440MB <Promise Fasttrak RAID1> status: READY > ar0: disk0 READY (master) using ad4 at ata2-master > ar0: disk1 READY (mirror) using ad6 at ata3-master > . > . > > www# atacontrol list > ATA channel 0: > Master: no device present > Slave: no device present > ATA channel 1: > Master: acd0 <Pioneer CD-ROM ATAPI Model DR-944 0107/E1.07> ATA/ATAPI > revision 4 > Slave: no device present > ATA channel 2: > Master: ad4 <ST3120026A/8.01> ATA/ATAPI revision 6 > Slave: no device present > ATA channel 3: > Master: ad6 <ST3120026A/8.01> ATA/ATAPI revision 6 > Slave: no device present > > www# atacontrol status ar0 > ar0: ATA RAID1 subdisks: ad4 ad6 status: READY > > > Server #2 FreeBSD 5.4 Adaptec ATA RAID 1200A (Highpoint Rocket Raid > 100) on a pci card > > # dmesg > . > . > . > atapci0: <HighPoint HPT370 UDMA100 controller> port > 0xd800-0xd8ff,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 irq > 9 at device 10.0 on pci2 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > . > . > . > ad4: 152627MB <ST3160023A/8.01> [310101/16/63] at ata2-master UDMA100 > ad6: 152627MB <ST3160023A/3.01> [310101/16/63] at ata3-master UDMA100 > ar0: 152627MB <ATA RAID1 array> [19457/255/63] status: READY subdisks: > disk0 READY on ad4 at ata2-master > disk1 READY on ad6 at ata3-master > . > . > . > > # atacontrol list > ATA channel 0: > Master: no device present > Slave: no device present > ATA channel 1: > Master: acd0 <CDU5211/YYS7> ATA/ATAPI revision 0 > Slave: no device present > ATA channel 2: > Master: ad4 <ST3160023A/8.01> ATA/ATAPI revision 6 > Slave: no device present > ATA channel 3: > Master: ad6 <ST3160023A/3.01> ATA/ATAPI revision 6 > Slave: no device present > # > # atacontrol status 0 > ar0: ATA RAID1 subdisks: ad4 ad6 status: READY > # > > Server #3 FreeBSD 6.0-RELEASE #0: Intel ICH5R/6300ESB SATA150 RAID chip > on motherboard > > #dmesg > . > . > . > atapci1: <Intel 6300ESB SATA150 controller> port > 0xe400-0xe407,0xe000-0xe003,0xd > c00-0xdc07,0xd800-0xd803,0xd400-0xd40f irq 18 at device 31.2 on pci0 > atapci1: failed to enable memory mapping! > ata2: <ATA channel 0> on atapci1 > ata3: <ATA channel 1> on atapci1 > . > . > . > ad4: 286168MB <Seagate ST3300831AS 3.03> at ata2-master SATA150 > ad6: 286168MB <Seagate ST3300831AS 3.03> at ata3-master SATA150 > ar0: 286168MB <Adaptec HostRAID RAID1> status: READY > ar0: disk0 READY (master) using ad4 at ata2-master > ar0: disk1 READY (mirror) using ad6 at ata3-master > . > . > . > mail# atacontrol list > ATA channel 0: > Master: no device present > Slave: no device present > ATA channel 1: > Master: acd0 <TSSTcorpCD/DVDW TS-H552U/US06> ATA/ATAPI revision 0 > Slave: no device present > ATA channel 2: > Master: ad4 <ST3300831AS/3.03> Serial ATA v1.0 > Slave: no device present > ATA channel 3: > Master: ad6 <ST3300831AS/3.03> Serial ATA v1.0 > Slave: no device present > mail# > > mail# atacontrol status ar0 > ar0: ATA RAID1 subdisks: ad4 ad6 status: READY > mail# > > Ted Mittelstaedt > >>-----Original Message----- >>From: owner-freebsd-questions@freebsd.org >>[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Robert Uzzi >>Sent: Friday, February 10, 2006 7:35 PM >>To: freebsd-questions@freebsd.org >>Subject: SATA Raid >> >> >>Anyone know of any of the cheaper SATA raid cards that work well under >>FreeBSD. I'd love to go get a 3ware but they are fairly pricey. >> >>_______________________________________________ >>freebsd-questions@freebsd.org mailing list >>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>To unsubscribe, send any mail to >>"freebsd-questions-unsubscribe@freebsd.org" >> >>-- >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.1.375 / Virus Database: 267.15.5/256 - Release Date: >>2/10/2006 >> > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?61705.207.70.139.52.1139688802.squirrel>