Date: Thu, 13 Dec 2012 02:06:08 +0100 From: "Ronald Klop" <ronald-freebsd8@klop.yi.org> To: freebsd-arm@freebsd.org Subject: sheevaplug boot from nandfs hangs Message-ID: <op.wo8dciyp8527sy@212-182-167-131.ip.telfort.nl>
next in thread | raw e-mail | index | archive | help
Hello, I succeeded in installing and booting my kernel (SHEEVAPLUG 10-current from 22 nov.) from nandfs. I followed all the advise at http://wiki.freebsd.org/NAND. But the rootfs will not mount/start. The end of the bootinfo is this: cryptosoft0: <software crypto> Timecounters tick every 1.000 msec ipfw2 initialized, divert loadable, nat loadable, default to accept, logging disabled usbus0: 480Mbps High Speed USB v2.0 ugen0.1: <Marvell> at usbus0 uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 1 port with 1 removable, self powered Root mount waiting for: usbus0 ugen0.2: <USB 2.0> at usbus0 umass0: <USB 2.0 USB Flash Drive, class 0/0, rev 2.00/11.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:0:0:-1: Attached to scbus0 Trying to mount root from nandfs:/dev/gnand0s.root []... WARNING: NANDFS is considered to be a highly experimental feature in FreeBSD. (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <USB 2.0 USB Flash Drive 1100> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 3894MB (7975296 512 byte sectors: 255H 63S/T 496C) The kernel is responsive because if I remove or insert the usb stick it displays messages about it. (Not shown above) I'm connected via serial. What could be wrong? What information can I give more? I installed /dev/gnand0s.root by tarring the content of / on my usb stick to the mounted /dev/gnand0s.root. That looked ok. Regards, Ronald.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?op.wo8dciyp8527sy>