Date: Sat, 28 Jan 2006 21:13:24 -0800 From: Brandon Mitchell <magicsmoke@gmail.com> To: Anish Mistry <mistry.7@osu.edu> Cc: freebsd-acpi@freebsd.org Subject: Re: Fujitsu S2110 Message-ID: <97bedf530601282113w68608800w85d699a3cc44941b@mail.gmail.com> In-Reply-To: <200601282241.57641.mistry.7@osu.edu> References: <200601282241.57641.mistry.7@osu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks for taking the time to reply. In response to both of your previous
posts:
My hw.acpi MIB looks something like this:
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 0
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_supported: C1/0 C2/1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu.cx_usage: 100.00% 0.00%
hw.acpi.video.crt0.active: 0
hw.acpi.video.lcd0.active: 1
hw.acpi.video.tv0.active: 0
hw.acpi.video.out0.active: 0
hw.acpi.acline: 1
hw.acpi.battery.life : 100
hw.acpi.battery.time: -1
hw.acpi.battery.state: 1
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
I see that the hw.acpi.power_button_state controls what that button does. I
attempted to set it to S3, and tapped the power button. I then got a series
of ioapic.suspend: feature not yet implemented messages, before it
suspended. It would not, however, come back out of the suspend; it got so
far as the BIOS, and that was it. I just hardbooted to get it back up again=
.
I also see the lid_switch_state is not set? Should this not be set to S3, a=
s
well? Or perhaps neither it nor the power_button_state are set to S3 due to
the 'feature not yet implemented' issue? Just conjecture, on my part.
I have the following buttons on the laptop (note the absence of a 'suspend'
or 'sleep' button - the manual states that tapping the power button is
supposed to provide this functionality):
Power
Mute
External Mouse (automagic within the BIOS, for the most part)
Brightness Up/Down
Volume Up/Down
External VGA/S-Video (more automagic, really)
5 'Application' buttons with 10 possible options:
Stop/Eject, Play/Pause, Rewind, FF - 'Player' mode
A, B, Internet, Email - 'Application' mode
The last button switches modes
I then have a switch on the back of the laptop that controls the wireless
radio, but does not actually shut the _card_ down - simply stops
broadcasting a signal.
The closest thing I have found thus far on the FUJB02B1 device is 'FUJ02B1'
which controls the sound and brightness functions on Lifebook S5582 (Pentiu=
m
3). Perhaps this device is a later (B) revision of same?
On 1/28/06, Anish Mistry <mistry.7@osu.edu> wrote:
>
> Ok, this is the interesting part of your FUJB02B1 device. You
> wouldn't happen to know what the following method does? eg. GVOL =3D
> get volume, GBLL =3D get back light level, etc.
> Also what function keys are available on your laptop?
>
> Method (GSIF, 0, NotSerialized)
> {
> If (IMTF)
> {
> Or (RGSI, 0x08, RGSI)
> }
> Else
> {
> And (RGSI, 0xFFFFFFF7, RGSI)
> }
>
> Return (RGSI)
> }
>
> --
> Anish Mistry
>
>
>
--
If UNIX doesn't have the solution you have the wrong problem.
UNIX is simple, but it takes a genius to understand it's simplicity.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?97bedf530601282113w68608800w85d699a3cc44941b>