From owner-freebsd-current Tue Mar 28 22:32:55 1995 Return-Path: current-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id WAA09624 for current-outgoing; Tue, 28 Mar 1995 22:32:55 -0800 Received: from Root.COM (implode.Root.COM [198.145.90.1]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id WAA09618 for ; Tue, 28 Mar 1995 22:32:53 -0800 Received: from corbin.Root.COM (corbin.Root.COM [198.145.90.18]) by Root.COM (8.6.8/8.6.5) with ESMTP id WAA05865; Tue, 28 Mar 1995 22:32:39 -0800 Received: from localhost (localhost [127.0.0.1]) by corbin.Root.COM (8.6.11/8.6.5) with SMTP id WAA00267; Tue, 28 Mar 1995 22:32:39 -0800 Message-Id: <199503290632.WAA00267@corbin.Root.COM> X-Authentication-Warning: corbin.Root.COM: Host localhost didn't use HELO protocol To: John Lind cc: current@FreeBSD.org Subject: Re: Minor bumps with 2.0-950322-SNAP In-reply-to: Your message of "Wed, 29 Mar 95 00:06:32 CST." <199503290606.AAA23974@starfire.mn.org> From: David Greenman Reply-To: davidg@Root.COM Date: Tue, 28 Mar 1995 22:32:38 -0800 Sender: current-owner@FreeBSD.org Precedence: bulk >Also, I think that I was fighting with a bad 10baseT cable and ended >up switching to the BNC connector to do the install, but just for the >record, what are the appropriate other flags (if any) to use the UTP >connector on a WD8013EBT? I checked the FAQ's, and INSTALL, README, >and RELNOTES, but didn't find this information. The connection type isn't controlled in the driver for the 80x3 cards. It has to be set on the card (via jumper or softconfig, whichever is appropriate). -DG