From owner-freebsd-questions Wed Feb 1 23:54:51 1995 Return-Path: questions-owner Received: (from root@localhost) by freefall.cdrom.com (8.6.9/8.6.6) id XAA20289 for questions-outgoing; Wed, 1 Feb 1995 23:54:51 -0800 Received: from SIRIUS.COM (earth.sirius.com [140.174.229.4]) by freefall.cdrom.com (8.6.9/8.6.6) with SMTP id XAA20283 for ; Wed, 1 Feb 1995 23:54:49 -0800 Received: from slip219.sirius.com by SIRIUS.COM (NX5.67e/NX3.14M) id AA17117; Wed, 1 Feb 95 23:54:31 -0800 Message-Id: <9502020754.AA17117@SIRIUS.COM> X-Sender: rsoles@sirius.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 02 Feb 1995 00:00:38 -0800 To: fod@netcom.com (Frank O'Donnell), questions@FreeBSD.org From: rsoles@SIRIUS.COM (Roger L Soles) Subject: Re: XFree86-3.1 install hangs, and misc Sender: questions-owner@FreeBSD.org Precedence: bulk I'll take a stab at these... other might have better answers... but here goes. At 09:16 PM 2/1/95 -0800, Frank O'Donnell wrote: >First I wanted to thank those who helped me with the >previous problem I had booting FreeBSD 2.0 on a second >hard drive. > >I'm now running into the following problems, if anyone has >any comment. I've been installing FreeBSD 2.0 from the >January 95 Walnut Creek CD-ROM on the second of two 522-MB >hard drives on a 486DX2-66 with 16 MB RAM (the entire second >drive is devoted to FreeBSD). > >1) Although the bindist and several other items install ok, >the XFree86-3.1 install has hung a couple of times on me now. >With bindist (~40 megs in size), it does some cksum checking >for about three minutes, then the install takes about 15 >minutes. When I try to install XFree86-3.1, it does a similar >amount of cksum checking (seeing the CD-ROM access light on, >plus occasional hard-disk access), then the menu says it's >installing, but at this point nothing further happens, no >CD-ROM or hard drive access. I thought maybe it took a while, >but I gave it well over an hour with no result. Is there a >known bug here, or something in what I'm doing? I had this happen to me the first time I installed -- I used the extract.sh, and got it all installed and configured. But the interesting thing was the next time I used the bindist (to re-install -- don't ask) it ran just fine... >2) I also wanted to get a few packages like Emacs, which are >not in the bininst menu, installed. I gather from some messages >on comp.os.386bsd.bugs that pkg_add is the utility to add >individual packages. However, I'm having some trouble getting >my CD-ROM drive (Mitsumi) mounted. I've tried >"/stand/mount_cd9660 /dev/mcd0 /cdrom" and other permutations >(/dev/mcd0a, etc) without success. Could someone walk me >through what I need to do to mount the CD-ROM drive and >install other packages? This was one of my first hurdles as well... It took a little looking through the system configuration for me to figure this one out... I don't have a Mitsumi, but try: mkdir /cdrom /stand/mount_cd9660 /dev/mcd0a /cdrom Then you should be able to use the CD-ROM by referencing the /cdrom tree... for a SCSI I use /dev/cd0a -- so I'm guessing about the device name. >3) The troubleshooting doc says that, if I'm booting FreeBSD >off my second hard drive, when the boot manager comes up I have >to type in "wd(1,a)/kernel" everytime or hack the boot manager >code (or wait for FreeBSD 2.1). I don't mind hacking the code, >but since I'm still learning Unix, rather than installing all >the source and wading through it, I wonder if there is a simple >byte I can change on my first hard drive with an MS-DOS utility >like Norton Disk Editor. I've used this to look at the boot >sector and see various stuff that seems to pertain to the >boot manager -- is it possible to say something like, "To change >the default boot drive from wd(0,a) to wd(1,a), you change the >byte at offset xyz from 0 to 1," or something like that? Should be able to get it to work -- another tack would be if you have _ANY_ space left on your first drive, you could create /root there, and /swap and /usr on your second drive... >4) I notice that if I run a FreeBSD session then shut down, >warm- boot and run MS-DOS, there are a couple of peculiarities. >First, as Windows starts, I get an error from Soundblaster 16 >saying the midiport configuration in system.ini is wrong. >Second, my Hayes 144 internal modem doesn't respond to its >usual initialization string or dial commands. Both of these >are fixed if I power the machine off and on to coldboot, and >then start a DOS/Windows session. Is it possible that in its >probe of the machine's hardware FreeBSD is writing something >out to ports or whatever that is leaving the hardware in a >funny state? That would be a good guess... and the other component is that the SB driver for DOS/Windows doesn't do a very good job putting the card into a know state... >Thanks for any help on any of the above, > >Frank >fod@netcom.com > > //---------------------------------------------------------------------------- // Roger L Soles // PO Box 280785 // San Francisco, CA 94124-0785