Date: Sat, 10 Jun 2000 13:29:27 +0100 From: Mark Ovens <mark@ukug.uk.freebsd.org> To: Azzeddine Mzouri <am@chello.fr> Cc: freebsd-questions@freebsd.org Subject: Re: SOS build kernel with SCSI Adapter AHA1542 ... Message-ID: <20000610132926.E233@parish> In-Reply-To: <39424A82.EB69C2A8@chello.fr>; from am@chello.fr on Sat, Jun 10, 2000 at 04:02:43PM %2B0200
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, Jun 10, 2000 at 04:02:43PM +0200, Azzeddine Mzouri wrote:
> Hello,
>
> I have some difficult to build the kernel for my machine :
> - configuration of machine : see attached file named "MyPCconfig"
> - file describing my kernel configuration see attached file named
> "NewKernel"
> - messages describing errors : see attached file named "MesgError";
>
> I am waiting for HELP.
^^^^
Don't shout please :)
Thanks for including all the files and error messages, but one
important thing you failed to mention was the version of FreeBSD you
are using.
OK, your config file looks fine except remove
controller aha0
you already have the correct line (device aha0) although this is not
the cause of the problem.
Try building it again, but using ``-r'' with config(8) and don't
forget ``make depend'':
# cd /sys/i386/conf/NewKernel
# /usr/sbin/config -r NewKernel
# cd /usr/src/sys/compile/NewKernel
# make depend
# make
# make install
>
> THANKS.
>
> Azzeddine Mzouri.
>
> I try to built my kernel but the "make" fails. It signals errors ...
> Perhaps, an error in my kernel description (see my file description
> attached).
>
> The text of the error message is the following :
>
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'cam_smq_alloc'
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'cam_sim_alloc'
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'cam_smq_free'
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'xpt_bus-register'
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'xpt_vreate_path'
>
> ...
> /usr/src/sys/compile/NewKernel/../../dev/aha/aha.c(.text+0xnnnn):
> undefined reference to 'cam_sim_free'
>
> *** Error code 1
> Stop in /usr/src/sys/compile/NewKernel
>
> I think that my SCSI device (see characteristics below) is incorrectly
> described.
>
> Please can you help me to diagnose this situation.
>
> Thanks.
>
> Azzeddine Mzouri.
>
>
> My machine configuration running under FreeBSD 4.0 is :
>
> - AMD-K6 3D 500Mhs
> - RAM 128MB
> - SCSI Host Adapter : AHA-1542CP at port 0x330-0x333 irq 10 drq 5 on isa 0
> - SCSI devices : SEAGATE/SCSI-2 (1010MB) da0 at aha1 bus 0 target 0 lun 0
> ...
> #
> # NewKernel - kernel configuration file for FreeBSD/i386
> #
> # For more information on this file, please read the handbook section on
> # Kernel Configuration Files:
> #
> # http://www.freebsd.org/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ./LINT configuration file. If you are
> # in doubt as to the purpose or necessity of a line, check first in LINT.
> #
> # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246 2000/03/09 16:32:55 jlemon Exp $
>
> machine "i386"
> cpu "I586_CPU"
> ident NEWKERNEL
> maxusers 32
>
> #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>
> options CPU_WT_ALLOC #enable write alloc for AMD K2-6 cpu
> options NO_MEMORY_HOLE #optimisation for AMD K2-6 cpu
> #indicates that the 15-16MB range is
> #definitely not being used by an ISA
> #memory hole.
>
>
> #options MATH_EMULATE #Support for x87 emulation
>
> #COMPATIBILITY OPTIONS
> options COMPAT_43 #implement system calls compatible
> #with 4.3BSD and older versions of
> #FreeBSD.
>
> #These three options provide support for System V Interface Definition-style IPC
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
>
> #KTRACE enables the system-call tracing facility ktrace (2).
> options KTRACE #kernel tracing
>
> #Allow ordinary users to take the console - this is useful for X.
> options UCONSOLE #Allow users to grab the console
>
> # XXX - this doesn't belong here either
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
>
> ###############################################################################
> #NETWORKING OPTIONS
>
> #Protocol families:
> #Only the INET <Internet> family is officially supported in FreeBSD.
> #
> options INET #InterNETworking
> options INET6 #IPv6 communications protocols
>
> #Network interfaces:
> #The "loop" pseudo-device is MANDATORY when networking is enabled.
> #The "ether" pseudo-device provide generic code to handle Ethernets;
> #it is MANDATORY when Ethernet device driver is configured or token-ring
> #is enabled.
> #The `bpf' pseudo-device enables the Berkeley Packet Filter. Be aware of
> #the administrative consequences of enabling this!
> #The `disc' pseu-do device implements a minimal network interfacei, which
> #throws away all packets sent and never receives any. It is included for
> #testing purposes. This shows up as 'ds' interface.
> #The `tun' pseudo-device implements (user-)ppp and nos-tun
> #The `pty' device usually turns out be "effectively mandatory", as it is
> #required for "telnetd", "rlogind", "screen", "emacs", and "xterm", amoung
> #others. Default value is 16, and Maximum value is 64.
>
> # Pseudo devices - the number indicates how many units to allocated.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device bpf # Berkeley packet filter
> pseudo-device disc # Discard device (ds0, ds1, etc)
> pseudo-device tun # Tunnel dirver {ppp{8}, nos-tun{8)}.
> pseudo-device pty # Pseudo-ttys (telnet etc)
>
>
> #########################################################################
> # MISCELLANEOUS DEVICES AND OPTIONS
>
> pseudo-device gzip # Exec gzipped a.out's
> pseudo-device md # Memory/malloc disk
> pseudo-device vn # Vnode driver (turns a file into a device)
> #pseudo-device log # kernel syslog interface (/dev/klog). MANDATORY
>
>
> #The `ef' pseudo-device provides support for multiple ethernet frame types
> #specified via ETHER_* options. See ef(4) for details.
> #pseudo-device ef #Multiple ethernet frames support
> #options ETHER_II #enable Ethernet_II frame
> #options ETHER_8023 #enable Ethernet_802.3 (Novell) frame
> #options ETHER_8022 #enable Ethernet_802.2 frame
> #options ETHER_SNAP #enable Ethernet_802.2/SNAP frame
>
> #FOR IPv6
> #The `gif' pseudo-device implements IPv6 over IPv4 tunneling, IPv4 over IPv6
> #tunneling, IPv4 over IPv4 tunneling and IPv6 over IPv6 tunneling.
> #The `faith' pseudo-device captures packets sent to it and diverts them
> #to the IPv4/IPv6 translation daemon.
> pseudo-device gif 4
> pseudo-device faith 1
>
> # TCP_RESTRICT_RST adds support for blocking the emission of TCP RST packets.
> # This is useful on systems which are expressed to SYN floods (e.g. IRC
> # servers) or any system which one does not wantto be easily portscannable.
>
> #options TCP_RESTRICT_RST #restrict emission of TCP RST
>
> # ICMP_BANDLIM enables icmp error response bandwidth limiting. You typically
> # want this option as it will help protect the machine from D.O.S. packet
> # attacks.
> options ICMP_BANDLIM #Rate limit bad replies
>
> # PCI Ethernet NICs.
> device ed # Novell NE1000 and NE2000;
>
> #####################################################################
> # FILESYSTEM OPTIONS
>
> # Only the root, /usr, and /tmp filesystems need be statically compiled;
> # everything else will be automatically loaded at mount time. (Exception:i
> # the UFS family ---FFS, and MFZ --- cannot currently be demand-loaded). Some
> #people still prefer tp statically compile other filesystems as well.
>
> # One of theses is mandatory:
> options FFS #Berkeley Fast Filesystem
> options NFS #Network Filesystem
>
> # The rest are optional:
> options CD9660 #ISO 9660 Filesystem
> options PROCFS #Process filesystem
>
> # The xFS_ROOT options REQUIRE the associated "options xFS"
> options CD9660_ROOT #CD-ROM usable as root, CD9660 required
> options FFS_ROOT #FFS usable as root device [keep this!]
> options NFS_ROOT #NFS usable as root device, NFS required
>
> options SUIDDIR #This machine is a Fileserver for
> #PC users using SAMBA
>
> options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
>
> ##################################################################
> # POSIX P1003.1B
>
> # Real time extensions added in the 1993 Posix
> # P1003_1B: Infrastructure
> # P1003_1B: Infrastructure (real-time extentions).
> options P1003_1B
> options _KPOSIX_PRIORITY_SCHEDULING
>
> options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
>
>
> ###############################################################
> #HARDWARE DEVICE CONFIGURATION
>
> # Mandatory ISA devices : isa, npx
> device isa
>
> #option for "isa":
> #options MAXMEM="(128*1024)"
> options AUTO_EOI_1
> #options BROKEN_KEYBOARD_RESET
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
>
> # PCI devices and PCI options
> device pci
>
> # ATA and ATAPI devices
> device ata0 at isa? port IO_WD1 irq 14
> device ata1 at isa? port IO_WD2 irq 15
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> options ATA_STATIC_ID #Static device numbering
> options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
>
> # SCSI Controllers
>
> controller aha0
> device aha0 at isa?
>
> # SCSI peripherals
> device scbus # SCSI bus (required)
> device da # Direct Access (disks)
>
> # The keyboard controller : it controls both the keyboard and the PS/2 mouse.
> device atkbdc0 at isa? port IO_KBD
>
> # The AT keyboard
> device atkbd0 at atkbdc? irq 1
>
> # The video card driver.
> device vga0 at isa?
>
> # Splash screen at start up! Screen savers require this too.
> pseudo-device splash
>
> # syscons is the default console driver, resembling an SCO console
> device sc0 at isa?
> options MAXCONS=8 # number of virtual consoles
> options SC_HISTORY_SIZE=200 # number of history buffer lines
> options SC_DISABLE_REBOOT # disable reboot key sequence
>
> # Add the following option to use the right button of the mouse to past text.
> options SC_TWOBUTTON_MOUSE
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> #device apm0 at nexus? disable flags 0x20 # Advanced Power Management
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
--
...and on the eighth day God created UNIX
________________________________________________________________
FreeBSD - The Power To Serve http://www.freebsd.org
My Webpage http://ukug.uk.freebsd.org/~mark/
mailto:mark@ukug.uk.freebsd.org http://www.radan.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000610132926.E233>