Date: Mon, 18 Feb 2008 12:31:08 +0300 From: =?utf-8?B?0JPQvtGA0LHQsNGH0ZHQsiDQmi7QkC4=?= <root@mobiscar.ru> To: <freebsd-current@freebsd.org> Subject: RE: Adaptec AHD U320 operating as only U160 Message-ID: <!&!AAAAAAAAAAAYAAAAAAAAACYns8jIcwpPhgVeWz%2B7levCgAAAEAAAAOTuHp1eni5KuAWHtQ/iOdEBAAAAAA==@mobiscar.ru> In-Reply-To: <200802180501.08502.joao@matik.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
Read this thread = http://readlist.com/lists/freebsd.org/freebsd-current/7/38214.html -----Original Message----- From: owner-freebsd-current@freebsd.org = [mailto:owner-freebsd-current@freebsd.org] On Behalf Of JoaoBR Sent: Monday, February 18, 2008 11:01 AM To: freebsd-current@freebsd.org Cc: Gelsema, P (Patrick); Niki Denev; Gelsema,P (Patrick) - FreeBSD Subject: Re: Adaptec AHD U320 operating as only U160 On Sunday 17 February 2008 14:23:41 Gelsema, P (Patrick) - FreeBSD = wrote: > On Sun, February 17, 2008 07:33, Justin T. Gibbs wrote: > > Niki Denev wrote: > > > I was playing around with DTrace, tracing cam/xpt and the ahd = driver > > > > and > > > > > found out that if i comment the following code : > > > > > > if ((spi3caps & SID_SPI_IUS) =3D=3D 0) > > > spi->ppr_options &=3D ~MSG_EXT_PPR_IU_REQ; > > > > > > at line 6655 in sys/cam/cam_xpt.c my disks again negotiate as = U320 : > > > > > > da0 at ahd0 bus 0 target 0 lun 0 > > > da0: <SEAGATE ST336807LW 0C01> Fixed Direct Access SCSI-3 = device > > > da0: 320.000MB/s transfers (160.000MHz DT, offset 63, 16bit) > > > da0: Command Queueing Enabled > > > da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C) > > it is not working on Tyan MBs embedded u320 Adaptec, I still get with = complete=20 world and kernel build on sources from this night #d3a 0L:a un<cShEeAdG!AT E ST373207LW 0005> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHzS MDPT:, AoPf fCsPeUt #623 ,L=20 au1n6cbhietd)! da0: Command Queueing Enabled da0: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) da1 at ahd0 bus 0 target 1 lun 0 da1: <SEAGATE ST373207LW 0003> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) da1: Command Queueing Enabled da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a It is this controller: ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port = 0x9000-0x90ff,0x8800-0x88ff=20 mem 0xfc9fc000-0xfc9fdfff irq 24 at device 6.0 on pci2 ahd0: [ITHREAD] aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port = 0x9800-0x98ff,0x9400-0x94ff=20 mem 0xfc9fe000-0xfc9fffff irq 25 at device 6.1 on pci2 ahd1: [ITHREAD] aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs which on first site seems to be the same on Supermicros MB: ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port = 0xa800-0xa8ff,0xa400-0xa4ff=20 mem 0xfc9fe000-0xfc9fffff irq 24 at device 3.0 on pci2 ahd0: [ITHREAD] aic7902: Ultra320 Wide Channel A, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port = 0xa000-0xa0ff,0xac00-0xacff=20 mem 0xfc9fc000-0xfc9fdfff irq 25 at device 3.1 on pci2 ahd1: [ITHREAD] aic7902: Ultra320 Wide Channel B, SCSI Id=3D7, PCI-X 67-100Mhz, 512 SCBs But I can confirm that it seems to be ok on 29320 Adaptec cards and on=20 Supermicro embedded U320 Adaptec --=20 Jo=C3=A3o A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada = segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to = "freebsd-current-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!&!AAAAAAAAAAAYAAAAAAAAACYns8jIcwpPhgVeWz%2B7levCgAAAEAAAAOTuHp1eni5KuAWHtQ/iOdEBAAAAAA==>