Date: Wed, 20 Dec 2006 19:25:58 +0100 From: Hans Petter Selasky <hselasky@c2i.net> To: freebsd-usb@freebsd.org, argentoff@rtelekom.ru Cc: freebsd-mobile@freebsd.org Subject: Re: USB problem on Acer Aspire WLMi 5102 with AMD Turion 64 X2 Message-ID: <200612201926.00435.hselasky@c2i.net> In-Reply-To: <200612201858.05614.argentoff@rtelekom.ru> References: <200612201858.05614.argentoff@rtelekom.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 20 December 2006 16:58, Paul Argentoff wrote:
> Hello, world.
>
> It's my first experience of installing FreeBSD on a notebook and also a
> first problem with USB devices. Here's the report:
>
>
> [root@paul-book /home/paul]# uname -r
> 6.1-RELEASE-p11
> [root@paul-book /home/paul]# uname -p
> i386
> [root@paul-book /home/paul]# uname -s
> FreeBSD
>
> dmesg:
>
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-RELEASE-p11 #1: Tue Dec 19 20:15:13 MSK 2006
> root@paul-book.rtelekom.net:/usr/src/sys/i386/compile/PAULBOOK
> acpi_alloc_wakeup_handler: can't alloc wake memory
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686-class
> CPU) Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MC
>A,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16>
> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
> AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
> Cores per package: 2
> real memory = 468254720 (446 MB)
> avail memory = 451375104 (430 MB)
> ACPI APIC Table: <PTLTD APIC >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> MADT: Forcing active-low polarity and level trigger for SCI
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <PTLTD RSDT> on motherboard
> acpi0: Power Button (fixed)
> acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
> cpu0: <ACPI CPU> on acpi0
> powernow0: <PowerNow! K8> on cpu0
> cpu1: <ACPI CPU> on acpi0
> powernow1: <PowerNow! K8> on cpu1
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> acpi_button1: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> acpi_video0: <ACPI video extension> port 0x9000-0x90ff mem
> 0xd4000000-0xd7ffffff,0xd0100000-0xd010ffff irq 17 at device 5.0 on pci1
> pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci4: <ACPI PCI bus> on pcib3
> ohci0: <ATI SB400 USB Controller> mem 0xd0004000-0xd0004fff irq 19 at
> device 19.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <ATI SB400 USB Controller> on ohci0
> usb0: USB revision 1.0
> uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> ohci1: <ATI SB400 USB Controller> mem 0xd0005000-0xd0005fff irq 19 at
> device 19.1 on pci0
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: <ATI SB400 USB Controller> on ohci1
> usb1: USB revision 1.0
> uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 4 ports with 4 removable, self powered
> pci0: <serial bus, USB> at device 19.2 (no driver attached)
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci0: <ATI IXP400 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on
> pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <multimedia> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci6: <ACPI PCI bus> on pcib4
> pci6: <network, ethernet> at device 1.0 (no driver attached)
> pci6: <network, ethernet> at device 2.0 (no driver attached)
> pci6: <bridge, PCI-CardBus> at device 4.0 (no driver attached)
> pci6: <memory, flash> at device 4.1 (no driver attached)
> pci6: <base peripheral> at device 4.2 (no driver attached)
> pci6: <memory, flash> at device 4.3 (no driver attached)
> pci6: <memory, flash> at device 4.4 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> ad0: 95396MB <HTS541010G9AT00 MBZOA60A> at ata0-master UDMA100
> acd0: DVDR <PIONEER DVD-RW DVR-K16RS/1.35> at ata0-slave UDMA33
> pass0 at ata0 bus 0 target 1 lun 0
> pass0: <PIONEER DVD-RW DVR-K16RS 1.35> Removable CD-ROM SCSI-0 device
> pass0: 33.000MB/s transfers
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad0s4a
> rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem
> 0xd0210000-0xd02100ff irq 21 at device 1.0 on pci6
> miibus0: <MII bus> on rl0
> rlphy0: <RealTek internal media interface> on miibus0
> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> rl0: Ethernet address: 00:16:d4:18:87:8b
>
> usbdevs:
> addr 1: OHCI root hub, ATI
> addr 1: OHCI root hub, ATI
> addr 2: USB2.0 Camera, vendor 0x0402
>
>
> usb part of kernel config:
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> #device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
>
> I've commented EHCI out because if present, it gives me "addr 1: EHCI root
> hub, ATI" and the system hangs on shutdown.
>
> In both cases (with and without ehci) the system does not react on
> inserting/removing USB devices. Who, what and how can help me out?
Could you have tried installing the my new USB system:
svn --username anonsvn --password anonsvn \
checkout svn://svn.turbocat.net/i4b
#
# The following commands will
# install the driver on FreeBSD:
#
cd i4b/trunk/i4b/FreeBSD.usb
make S=../src package
make install
#
# After that you build a new kernel.
#
# PS: you need to install /usr/ports/devel/subversion
# for the svn command to work
--HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612201926.00435.hselasky>