Date: Sun, 12 Oct 2008 14:51:45 -0500 (CDT) From: Eric van Gyzen <eric@vangyzen.net> To: FreeBSD-gnats-submit@FreeBSD.org Cc: Eric van Gyzen <eric@vangyzen.net> Subject: usb/128093: panic in ohci_softintr: OXFER(xfer)->xfer.pipe == NULL Message-ID: <20081012195145.841E3451E7@eddie.vangyzen.net> Resent-Message-ID: <200810141350.m9EDo1k6003717@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 128093 >Category: usb >Synopsis: panic in ohci_softintr: OXFER(xfer)->xfer.pipe == NULL >Confidential: no >Severity: serious >Priority: low >Responsible: freebsd-usb >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Oct 14 13:50:01 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Eric van Gyzen >Release: FreeBSD 7.0-RELEASE-p2 amd64 >Organization: >Environment: ==== dmesg ==== Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE-p2 #1: Sat Jun 21 21:05:56 CDT 2008 vangyzen@eddie.vangyzen.net:/usr/obj/usr/src/sys/EDDIE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2310.66-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 usable memory = 2137505792 (2038 MB) avail memory = 2062901248 (1967 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 device_attach: powernow1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device 2.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 10 ports with 10 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 2.1 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb1: EHCI version 1.0 usb1: companion controller, 10 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1 uhub1: 10 ports with 10 removable, self powered umass0: <Seagate FreeAgentDesktop, class 0/0, rev 2.00/0.00, addr 2> on uhub1 atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 4.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP55 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xdc00-0xdc0f mem 0xfe02d000-0xfe02dfff irq 20 at device 5.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP55 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f mem 0xfe02c000-0xfe02cfff irq 21 at device 5.1 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xc400-0xc407,0xc000-0xc003,0xbc00-0xbc07,0xb800-0xb803,0xb400-0xb40f mem 0xfe02b000-0xfe02bfff irq 22 at device 5.2 on pci0 atapci3: [ITHREAD] ata6: <ATA channel 0> on atapci3 ata6: [ITHREAD] ata7: <ATA channel 1> on atapci3 ata7: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ath0: <Atheros 5212> mem 0xfdef0000-0xfdefffff irq 17 at device 7.0 on pci1 ath0: [ITHREAD] ath0: using obsoleted if_watchdog interface ath0: Ethernet address: 00:11:95:91:32:f4 ath0: mac 7.9 phy 4.5 radio 5.6 pcm0: <NVidia MCP55 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 23 at device 6.1 on pci0 pcm0: [ITHREAD] nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb000-0xb007 mem 0xfe02a000-0xfe02afff,0xfe029000-0xfe0290ff,0xfe028000-0xfe02800f irq 20 at device 8.0 on pci0 miibus0: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto nfe0: Ethernet address: 00:1e:8c:3e:20:ea nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] nfe0: [FILTER] pcib2: <ACPI PCI-PCI bridge> at device 15.0 on pci0 pci2: <ACPI PCI bus> on pcib2 vgapci0: <VGA-compatible display> port 0xac00-0xacff mem 0xe8000000-0xefffffff,0xfddf0000-0xfddfffff irq 16 at device 0.0 on pci2 drm0: <ATI Radeon RV370 X600 Pro> on vgapci0 info: [drm] Initialized radeon 1.25.0 20060524 vgapci1: <VGA-compatible display> mem 0xfdde0000-0xfddeffff at device 0.1 on pci2 acpi_tz0: <Thermal Zone> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled ums0: <Dell Dell USB Mouse, class 0/0, rev 2.00/1.10, addr 2> on uhub0 ums0: 3 buttons and Z dir. ukbd0: <DELL DELL USB Keyboard, class 0/0, rev 1.10/1.05, addr 3> on uhub0 kbd2 at ukbd0 ugen0: <APC Back-UPS ES 500 FW:801.e5.D USB FW:e5, class 0/0, rev 1.10/1.06, addr 4> on uhub0 Timecounters tick every 1.000 msec acd0: DVDR <TSSTcorpCD/DVDW TS-H552U/US03> at ata0-master UDMA33 ad4: 152627MB <Hitachi HDS721616PLA380 P22OABEA> at ata2-master SATA300 pcm0: <HDA Codec: Analog Devices AD1988B> pcm0: <HDA Driver Revision: 20071129_0050> SMP: AP CPU #1 Launched! da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Seagate FreeAgentDesktop 100D> Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C) GEOM_LABEL: Label for provider da0s1 is ufs/backup. GEOM_LABEL: Label for provider da0s1 is ntfs/FreeAgent Drive. Trying to mount root from ufs:/dev/ad4s1a WARNING: / was not properly dismounted ath0: link state changed to UP nfe0: link state changed to UP ==== kernel config ==== GENERIC minus unused stuff. # # based on: # $FreeBSD: src/sys/amd64/conf/GENERIC,v 1.484.2.2.2.1 2008/02/06 03:24:28 scottl Exp $ # cpu HAMMER ident EDDIE makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler options PREEMPTION # Enable kernel thread preemption options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options UFS_GJOURNAL # Enable gjournal-based UFS journaling options CD9660 # ISO 9660 Filesystem options GEOM_PART_GPT # GUID Partition Tables. options GEOM_LABEL # Provides labelization options COMPAT_43TTY # BSD 4.3 TTY compat [KEEP THIS!] options COMPAT_IA32 # Compatible with i386 binaries options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options COMPAT_FREEBSD5 # Compatible with FreeBSD5 options COMPAT_FREEBSD6 # Compatible with FreeBSD6 options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options STOP_NMI # Stop CPUS using NMI instead of IPI options AUDIT # Security event auditing # Make an SMP-capable kernel by default options SMP # Symmetric MultiProcessor Kernel # CPU frequency control device cpufreq # Bus support. device acpi device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID # Static device numbering # SCSI peripherals device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device kbdmux # keyboard multiplexer device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports device uart # Generic UART driver # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device nfe # nVidia nForce MCP on-board Ethernet # Wireless NIC cards device wlan # 802.11 support device wlan_wep # 802.11 WEP support device wlan_ccmp # 802.11 CCMP support device wlan_tkip # 802.11 TKIP support device wlan_amrr # AMRR transmit rate control algorithm device wlan_scan_ap # 802.11 AP mode scanning device wlan_scan_sta # 802.11 STA mode scanning device ath # Atheros pci/cardbus NIC's device ath_hal # Atheros HAL (Hardware Access Layer) device ath_rate_sample # SampleRate tx rate control for ath # Pseudo devices. device loop # Network loopback device random # Entropy device device ether # Ethernet support device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device gif # IPv6 and IPv4 tunneling device firmware # firmware assist module # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! # Note that 'bpf' is required for DHCP. device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners >Description: The system panicked on input from a USB keyboard. X was running. The system had been idle, so the monitor was off. I have a habit of hitting Ctrl to make it "wake up"; that's probably what I did this time, but I'm not certain. It didn't respond, so I hit a few more keys (Num Lock, Ctrl-Alt-F1, etc). Eventually, I hit Ctrl-Alt-Delete, and it rebooted. Most likely, the system had just finished dumping core and rebooted on its own, and the timing was just a coincidence. I've been running this setup for nine months, and this is the first instance of this panic. One might suspect it's a timing issue. #7 0xffffffff8040332e in calltrap () at /usr/src/sys/amd64/amd64/exception.S:169 #8 0xffffffff8020a4a0 in ohci_softintr (v=Variable "v" is not available.) at /usr/src/sys/dev/usb/ohci.c:1428 #9 0xffffffff8020bc30 in ohci_intr1 (sc=0xffffffff80a44000) at /usr/src/sys/dev/usb/ohci.c:1194 #10 0xffffffff8025bff0 in ithread_loop (arg=0xffffff00012356c0) at /usr/src/sys/kern/kern_intr.c:1036 (kgdb) f 8 #8 0xffffffff8020a4a0 in ohci_softintr (v=Variable "v" is not available.) at /usr/src/sys/dev/usb/ohci.c:1428 1428 usb_rem_task(OXFER(xfer)->xfer.pipe->device, (kgdb) l 1423 if ((std->flags & OHCI_CALL_DONE) == 0) 1424 continue; 1425 1426 /* Normal transfer completion */ 1427 callout_stop(&xfer->timeout_handle); 1428 usb_rem_task(OXFER(xfer)->xfer.pipe->device, 1429 &OXFER(xfer)->abort_task); 1430 for (p = xfer->hcpriv; p->xfer == xfer; p = n) { 1431 n = p->nexttd; 1432 ohci_free_std(sc, p); (kgdb) p * ((struct ohci_xfer *)(xfer)) $2 = {xfer = {pipe = 0x0, priv = 0xff00000000000000, buffer = 0xffffffff80628bdc, length = 8, actlen = 8, flags = 4, timeout = 0, status = USBD_NORMAL_COMPLETION, callback = 0xffffffff80215f80 <ukbd_intr>, done = 1 '\001', request = { bmRequestType = 0 '\0', bRequest = 0 '\0', wValue = "\000", wIndex = "\000", wLength = "\000"}, frlengths = 0x0, nframes = 0, device = 0xffffff00014d9d00, dmamap = {segs = {{ds_addr = 6458332, ds_len = 8}, {ds_addr = 0, ds_len = 0} <repeats 32 times>}, nsegs = 1, map = 0x0}, allocbuf = 0x0, rqflags = 16, next = { stqe_next = 0x0}, hcpriv = 0xffffff000130af50, timeout_handle = { c_links = {sle = {sle_next = 0x0}, tqe = {tqe_next = 0x0, tqe_prev = 0x0}}, c_time = 0, c_arg = 0x0, c_func = 0, c_mtx = 0xffffffff8062d7e0, c_flags = 0}}, abort_task = {next = { tqe_next = 0x0, tqe_prev = 0x0}, fun = 0xffffffff8020a080 <ohci_timeout_task>, arg = 0xffffff0001238000, queue = -1}, ohci_xfer_flags = 0} (kgdb) p ((struct ohci_xfer *)(xfer))->xfer.pipe $3 = (struct usbd_pipe *) 0x0 (kgdb) p cpuid_to_pcpu[0]->pc_curthread->td_proc->p_comm $1 = "irq21: ohci0+\000\000\000\000\000\000" (kgdb) p cpuid_to_pcpu[1]->pc_curthread->td_proc->p_comm $2 = "audit\000r", '\0' <repeats 12 times> I'm comfortable with kernel debugging, but I know nothing about the USB code. If you know where to look, I'll gladly give you all the data you need. >How-To-Repeat: Unlikely? >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20081012195145.841E3451E7>