Date: Tue, 12 Feb 2002 10:32:28 -0800 (PST) From: "Gerardo Amaya G." <jogegabsd@yahoo.com> To: freebsd-questions@freebsd.org Cc: freebsd-multimedia@freebsd.org Subject: forgot dmesg(Sound Card Problem) Message-ID: <20020212183228.86093.qmail@web20110.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
--0-293907833-1013538748=:86081 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline sorry I forgot to attach dmesg __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com --0-293907833-1013538748=:86081 Content-Type: text/plain; name="dmesg.txt" Content-Description: dmesg.txt Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002 murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (996.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 267780096 (261504K bytes) avail memory = 255873024 (249876K bytes) Preloaded elf kernel "kernel" at 0xc0496000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00fdf10 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11 uhci0: <UHCI (generic) USB controller> port 0x1840-0x185f irq 11 at device 29.0 on pci0 uhci0: (New UHCI DeviceId=0x24828086) usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: (0x24828086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1860-0x187f irq 10 at device 29.1 on pci0 uhci1: (New UHCI DeviceId=0x24848086) usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: (0x24848086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 pci2: <unknown card> (vendor=0x14f1, dev=0x2f00) at 4.0 pci2: <unknown card> (vendor=0x104c, dev=0x8023) at 5.0 pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 10 at device 6.0 on pci2 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 fxp0: <Intel Pro/100 Ethernet> port 0x3000-0x303f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2 fxp0: Ethernet address 00:02:a5:99:38:cd inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x1800-0x180f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 5 pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 5 orm0: <Option ROMs> at iomem 0xc0000-0xcdfff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 19077MB <TOSHIBA MK2017GAP> [38760/16/63] at ata0-master UDMA100 acd0: CD-RW <TOSHIBA DVD-ROM SD-R2002> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a --0-293907833-1013538748=:86081-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020212183228.86093.qmail>