Date: Tue, 15 Nov 2005 12:23:14 -0800 From: colin williams <psientist@gmail.com> To: freebsd-current@freebsd.org Subject: HP D325 Panic Fault Trap Message-ID: <ca7595b60511151223v256905afx7c72aec5a04e486f@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Im trying to boot FreeBSD on a hp d325 minitower. I am getting the
same panic fault crap. I set my settings the same as Chris stated in
the archives but am not having any luck.
Maybe he forget to mention something I'm supposed to set in the bios?
Someone else wrote me already. All you have to do is go into the BIOS
setup: Disable HD DMA Transfers, Disable HD Translation, Switch it to
PIO 0 mode. FreeBSD boots fine, then when the kernel takes over it
programms the ATA controller itself, so no speed loss (little slower
booting, a second or two at most).
~Chris
I have a new HP D325 minitower with an Athlon XP 3000+ processor, 512
RAM, 40GB 7200 HD, CD-RW/DVD-Rom.
If I try to boot a 5.2.1 based CD (Official Install or FreeSBIE) I get
this message:
FreeBSD/i386 Bootstrap loader, Revision 1.1
(root at nathan, Mon Feb 23 15:05:46 CET 2004)
|
int=3D0000000d err=3D00000000 efl=3D00030246 eip=3D0000249a
eax=3D00002025 ebx=3D00000004 ecx=3D00002000 edx=3D0000a654
esi=3D000008d5 edi=3D0006290c ebp=3D00001516 esp=3D000014e0
cs=3Df000 ds=3Dede1 es=3Dede1 fs=3D0000 gs=3D0000 ss=3Dede1
cs:eip=3D0f 20 dd 81 e5 00 f0 0f-20 c2 0f 01 e0 a8 01 75
08 80 c2 fe e8 53 ff eb-21 0f 20 e0 a9 30 00 75
ss:esp=3D0c 29 06 00 d5 08 c0 00-16 15 00 00 00 15 00 00
04 00 00 00 54 a6 00 00-04 00 00 00 25 a6 00 00
BTX Halted
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ca7595b60511151223v256905afx7c72aec5a04e486f>