Date: Sat, 20 Dec 2003 10:52:46 +0100 From: Lars =?iso-8859-1?Q?K=F6ller?= <lars@koellers.net> To: freebsd-questions@freebsd.org, freebsd-current@freebsd.org Cc: lkoeller@freebsd.org Subject: 5.2-rc1 Install Message-ID: <200312200952.hBK9qktK001299@odie.koellers.net>
next in thread | raw e-mail | index | archive | help
--------
Hi,
I'm trying to install a 5.2 system and have had a lot of trouble:
- The disk images won't boot on my Adaptec 2940UW controller with the =
latest Firmware.
I have to make an image by myself with mkisofs and cdrecord. After =
this all boots well.
- My installation isn't runable, cause the kernel don't find the rootfs
- Disk configuration:
- ad0 (s1: FreeBSD-4.0)
- da0 (s1: FAT32, W98)
- da1 (s1: FBSD-5.2)
- da2 (s1: FAT32)
I install on da1 without any problems. After the reboot all the =
disks are found by GEOM.
However the kernel only finds da0s1a .... da1 .... ad0s1a as a =
rootfs, da1s1a is missing.
The disk numeration is the same as during the install.
Cause I have no access to ufs2 I'm not able to have a look into it from =
the running 4.9 system. The disklabel seems to bo o.k.:
root@odie:~/
142646 : disklabel da1s1
# /dev/da1s1c:
=2E.......
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 4194304 0 4.2BSD 2048 16384 28552 # (Cyl. 0 - 26=
1*)
b: 1073152 6291456 swap # (Cyl. 391*- 45=
8*)
c: 17767827 0 unused 0 0 # (Cyl. 0 - 11=
05*)
d: 1048576 4194304 4.2BSD 2048 16384 8 # (Cyl. 261*- 32=
6*)
e: 1048576 5242880 4.2BSD 2048 16384 8 # (Cyl. 326*- 39=
1*)
f: 10403219 7364608 4.2BSD 2048 16384 28552 # (Cyl. 458*- 11=
05*)
super block size 0
Any ideas?
Best regards
Lars
-- =
Lars K=F6ller
E-Mail: lars@koellers.net (LKoeller@FreeBSD.ORG)
-------- FreeBSD, was sonst? ---- http://www.de.freebsd.org --------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200312200952.hBK9qktK001299>