Date: Thu, 05 Dec 2013 21:51:29 -0500 From: Darryl Lyle <blue_phoenix316@yahoo.com> To: freebsd-net@freebsd.org, yongari@freebsd.org Subject: Can't connect to network with my NIC Message-ID: <52A13BB1.50106@yahoo.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------050205050605040301090407
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Hey guys,
I just installed the latest pc-bsd 10 stable image, and I can't
connect to my network with my nic, but I can connect fine via wifi.
ifconfig re0
e0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether f8:b1:56:9d:84:3a
inet6 fe80::fab1:56ff:fe9d:843a%re0 prefixlen 64 scopeid 0x1
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
Attached is dmesg and pciconf -lv
If I try dhclient re0 I get no DHCPOFFERS
v/r
Darryl Lyle
--------------050205050605040301090407
Content-Type: text/plain; charset=UTF-8;
name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10-STABLE-p4 #0 403eae4(stable/10): Mon Nov 18 16:35:51 EST 2013
root@avenger:/usr/obj/root/pcbsd-build/git/freebsd/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz (3392.21-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x306c3 Family = 0x6 Model = 0x3c Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,<b11>,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Standard Extended Features=0x2fbb<GSFSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ENHMOVSB,INVPCID,RTM>
TSC: P-state invariant, performance statistics
real memory = 9110028288 (8688 MB)
avail memory = 8212455424 (7832 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL FX09 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
random: <Software, Yarrow> initialized
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS> on motherboard
acpi0: <DELL FX09 > on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GTX 660> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA (0x0e0a) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 16 at device 20.0 on pci0
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7318000-0xf73183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7310000-0xf7313fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7200000-0xf7200fff,0xf2100000-0xf2103fff irq 18 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: f8:b1:56:9d:84:3a
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros AR9485> mem 0xf7100000-0xf717ffff irq 19 at device 0.0 on pci4
ar9300_set_stub_functions: setting stub functions
ar9300_set_stub_functions: setting stub functions
ar9300_attach: calling ar9300_hw_attach
ar9300_hw_attach: calling ar9300_eeprom_attach
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9485 mac 576.1 RF5110 phy 0.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7317000-0xf73173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7316000-0xf73167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x468 offMax=0x668
hdacc0: <NVIDIA (0x0040) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0040) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0040) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC899 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC899 (Analog 7.1+HP/2.0)> at nid 20,22,21,23,27 and 24,25,26 on hdaa1
random: unblocking device.
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen2.1: <Intel> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086> at usbus0
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST1000DM003-1CH162 CC47> ATA-9 SATA 3.x device
ada0: Serial Number Z1D7GHVB
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp DVD+-RW SH-216DB D100> Removable CD-ROM SCSI-0 device
cd0: Serial Number S10Q6YBD800E6C
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Netvsc initializing... SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1696106832 Hz quality 1000
Root mount waiting for: usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
xhci0: Port routing mask set to 0x00000000
usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored)
ugen0.2: <Unknown> at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
ugen2.2: <vendor 0x8087> at usbus2
uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087> at usbus1
uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus1
ugen1.3: <Generic> at usbus1
umass0: <Bulk-In, Bulk-Out, Interface> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4000
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 20100818841300000
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim0 bus 0 scbus3 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: Serial Number 20100818841300000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
ugen2.3: <DELL> at usbus2
ukbd0: <DELL Dell USB Wired Multimedia Keyboard, class 0/0, rev 1.10/1.07, addr 3> on usbus2
da2 at umass-sim0 bus 0 scbus3 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: Serial Number 20100818841300000
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
kbd2 at ukbd0
da3 at umass-sim0 bus 0 scbus3 target 0 lun 3
da3: <Generic- M.S./M.S.Pro/HG 1.00> Removable Direct Access SCSI-0 device
da3: Serial Number 20100818841300000
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
ugen2.4: <DELL> at usbus2
Root mount waiting for: usbus2
ugen2.5: <Atheros Communications> at usbus2
Trying to mount root from zfs:tank/ROOT/default []...
wlan0: Ethernet address: 80:56:f2:3b:a5:67
uhid0: <DELL Dell USB Wired Multimedia Keyboard, class 0/0, rev 1.10/1.07, addr 3> on usbus2
ums0: <DELL DELL USB Laser Mouse, class 0/0, rev 2.00/57.00, addr 4> on usbus2
ums0: 8 buttons and [XYZT] coordinates ID=0
Cuse4BSD v0.1.30 @ /dev/cuse
pefs: AESNI hardware acceleration enabled
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
pid 3347 (VBoxSVC), uid 0: exited on signal 6
re0: link state changed to DOWN
re0: link state changed to UP
wlan0: Ethernet address: 80:56:f2:3b:a5:67
ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
wlan0: link state changed to UP
wlan0: link state changed to DOWN
re0: link state changed to DOWN
re0: link state changed to UP
wlan0: Ethernet address: 80:56:f2:3b:a5:67
wlan0: link state changed to UP
--------------050205050605040301090407
Content-Type: text/plain; charset=UTF-8;
name="pciconf.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename="pciconf.txt"
hostb0@pci0:0:0:0: class=0x060000 card=0x05b71028 chip=0x0c008086 rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'Haswell DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x05b71028 chip=0x0c018086 rev=0x06 hdr=0x01
vendor = 'Intel Corporation'
device = 'Haswell PCI Express x16 Controller'
class = bridge
subclass = PCI-PCI
xhci0@pci0:0:20:0: class=0x0c0330 card=0x05b71028 chip=0x8c318086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB xHCI Host Controller'
class = serial bus
subclass = USB
none0@pci0:0:22:0: class=0x078000 card=0x05b71028 chip=0x8c3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point MEI Controller'
class = simple comms
ehci0@pci0:0:26:0: class=0x0c0320 card=0x05b71028 chip=0x8c2d8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
hdac1@pci0:0:27:0: class=0x040300 card=0x05b71028 chip=0x8c208086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point High Definition Audio Controller'
class = multimedia
subclass = HDA
pcib2@pci0:0:28:0: class=0x060400 card=0x05b71028 chip=0x8c108086 rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = 'Lynx Point PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:2: class=0x060400 card=0x05b71028 chip=0x8c148086 rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = 'Lynx Point PCI Express Root Port'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:7: class=0x060400 card=0x05b71028 chip=0x8c1e8086 rev=0xd5 hdr=0x01
vendor = 'Intel Corporation'
device = 'Lynx Point PCI Express Root Port'
class = bridge
subclass = PCI-PCI
ehci1@pci0:0:29:0: class=0x0c0320 card=0x05b71028 chip=0x8c268086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
isab0@pci0:0:31:0: class=0x060100 card=0x05b71028 chip=0x8c448086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point LPC Controller'
class = bridge
subclass = PCI-ISA
ahci0@pci0:0:31:2: class=0x010601 card=0x05b71028 chip=0x8c028086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point 6-port SATA Controller 1 [AHCI mode]'
class = mass storage
subclass = SATA
none1@pci0:0:31:3: class=0x0c0500 card=0x05b71028 chip=0x8c228086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0@pci0:1:0:0: class=0x030000 card=0x098a10de chip=0x118510de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA
hdac0@pci0:1:0:1: class=0x040300 card=0x098a10de chip=0x0e0a10de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GK104 HDMI Audio Controller'
class = multimedia
subclass = HDA
re0@pci0:3:0:0: class=0x020000 card=0x05b71028 chip=0x816810ec rev=0x0c hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
class = network
subclass = ethernet
ath0@pci0:4:0:0: class=0x028000 card=0x02091028 chip=0x0032168c rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR9485 Wireless Network Adapter'
class = network
--------------050205050605040301090407--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52A13BB1.50106>