Date: Fri, 19 Jul 2019 13:54:37 +0200 From: Domagoj =?UTF-8?Q?Smol=C4=8Di=C4=87?= <rank1seeker@gmail.com> To: Warner Losh <imp@bsdimp.com> Cc: hackers@freebsd.org, delphij@FreeBSD.org Subject: Re: Device's "stolen" sector Message-ID: <20190719135437.00002536@gmail.com> In-Reply-To: <CANCZdforpXsdFA-Aykv1pmdVgWaFEU8sCsraq9g-P7sptOJAEA@mail.gmail.com> References: <20190716182350.000054f8@gmail.com> <CANCZdforpXsdFA-Aykv1pmdVgWaFEU8sCsraq9g-P7sptOJAEA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 16 Jul 2019 10:45:07 -0600
Warner Losh <imp@bsdimp.com> wrote:
> On Tue, Jul 16, 2019 at 10:25 AM Domagoj Smol=C4=8Di=C4=87
> <rank1seeker@gmail.com> wrote:
>=20
> > 11.2-RELEASE-p9
> >
> > Tested with >1 disks:
> > --
> > SATA disk connected directly with SATA cable to MBO, shows correct
> > amount of sectors.
> > diskinfo -v ada1
> >
> > When I connect it to the same MBO over USB to SATA adapter, 1
> > sector is missing (the last one)
> > diskinfo -v da0
> >
> > Having last sector inaccessible is a huge problem as many "things"
> > use it for a metadata.
> > This has many times caused MBR disks occasionally to not be visible
> > at all while being 'da0' (gpart: No such geom: da0.)
> > And also GPT disks to be in a [CORRUPT] state upon reattach
> > directly to SATA interface.
> >
> > Before submitting a bug, there is only 1 variable left that I can't
> > test, because I have only 1 USB to SATA adapter.
> > It might be a hardware issue, so can someone else test this too?
> > =20
>=20
> On 11.x, I'd install the sg3_util port. You'll need the sg device in
> your kernel.
Note: This isn't GENERIC kernel and has only what hardware needs.
Even with:
'device sg'
I'm getting error for all sg_* CMDs:
CAM status: CCB request was invalid
Adding:
'device ses #Enclosure Services (SES and SAF-TE)'
hasn't helped too.
PS: Yes i did '# kldload linux'
Port hasn't specified mandatory devices!
> Use sg_readcap on /dev/da0 to see if the numbers match
> the devinfo from ada1. If they match, then we have a bug in the da
> driver. If they differ, you have hardware issues in the USB to SATA
> adapter.
>=20
> Warner
sg_* is being used to query device's size by sending SCSI commands directly=
to device,
through da driver's node, thus ignoring 'da' driver's response of device's =
size to i.e; diskinfo?
Domagoj Smol=C4=8Di=C4=87
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20190719135437.00002536>