Date: Sat, 18 Jan 2003 15:02:27 -0500 From: Jason Morgan <jwm-freebsd@sentinelchicken.net> To: freebsd-questions@freebsd.org Subject: usb problem Message-ID: <20030118200227.GA7396@sentinelchicken.net>
next in thread | raw e-mail | index | archive | help
I am having trouble getting my USB Zip drive and my canon camera
working. I think it may be a problem with USB in general.
In the kernal I have:
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# USB support
device uhci # UHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
When I boot ('boot -v') I get:
# dmesg | grep umass
umass0: Iomega USB Zip 100, rev 1.00/1.00, addr 2
umass0: Get Max Lun not supported (STALLED)
umass0:0:0:-1: Attached to scbus0 as device 0
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
# dmesg | grep uhci
uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 11 at device 17.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
uhci2: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 11 at device 17.4 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
# dmesg | grep usb
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
# dmesg | grep uhub
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
# dmesg | grep da (Note: This is the correct device for the Zip drive, right?)
...
Can anyone offer any advise?
Thanks,
Jason Morgan
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030118200227.GA7396>