Date: Fri, 02 Nov 2001 09:54:30 -0500 From: Allen Richon <arichon@molsol.com> To: <Freebsd-questions@FreeBSD.org> Subject: Problem with rl0 configuration Message-ID: <B8081DD6.2521%arichon@molsol.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hello, I am trying to install FreeBSD4.4.1 on my PC with no success regarding the Ethernet card. My PC platform is an HP-Pavivilion-7850, PentiumIII-933Mhz. My NIC is an HP EN1207D-TX PCI 10/100 Fast Ethernet adapter. DOS probe shows the card is set to irq5, I/O port 0x1400, Memory location 0x10001. I have built a custom kernel to handle the network card as well as a couple of other features. When the system boots, I get the following output (abbreviated to remove the usual lines that appear): Copyright © 1992-2001 The FreeBSD Project. Copyright Š FreeBSD 4.3-Release #0 Thur Nov 1 17:24:04 EST 2001 . . . available memory = 258543616 )252484 K Bytes) Preloaded elf kernel "kernel" at 0xc02cd000 Preloaded userconfig-script "/boot/kernel.conf" at 0xc02cd0a8 Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <HOST to PC Bridge> on motherboard pci0: <pci bus> on pcib0: pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <NVIDIA Riva Vanta TNT2 graphics Accel> at 0.0 irq 11 isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596 ATA66 Controller> port 0xd800 0xd80f at dev 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400 0xd41f irq 9 at dev 4.2 usb0: <VIA83C572 USB Controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00 addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: ALCOR Generic USB hub, class 9/0, rev 1.110/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered rl0: <Accton MPX 5030/5038 10/100BaseTX> at dev 10.0 on pci0 rl0: couldnąt map ports/memory device_probe_and_attach: rl0 attach returned 6 pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.0 pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.1 pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.2 pcb1: <Host to PCI bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B> at port 0x3f0 0x3f5, 0x3f7 irq 6 drq 2 on isa0: fdc0: fifo enabled, 8 byte threshold fd0: <1440-KB 3.5" drive> on fdc0: drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 . .rest of information is as usual . ifconfigure: interface rl0 does not exist ifconfigure: interface rl0 does not exist Mounting root from ufs:/dev/ad0s2a . . . login: I have looked at all the manuals and the faq, so what am I missing? Thanks for any assistance. Allen Richon [-- Attachment #2 --] <HTML> <HEAD> <TITLE>Problem with rl0 configuration</TITLE> </HEAD> <BODY> <BR> <FONT SIZE="2"><FONT FACE="Times New Roman"><BR> <BR> </FONT></FONT><FONT FACE="Courier">Hello,<BR> <BR> I am trying to install FreeBSD4.4.1 on my PC with no success regarding the Ethernet card. My PC platform is an HP-Pavivilion-7850, PentiumIII-933Mhz. My NIC is an HP EN1207D-TX PCI 10/100 Fast Ethernet adapter. DOS probe shows the card is set to irq5, I/O port 0x1400, Memory location 0x10001.<BR> <BR> I have built a custom kernel to handle the network card as well as a couple of other features. When the system boots, I get the following output (abbreviated to remove the usual lines that appear):<BR> <BR> <BR> Copyright © 1992-2001 The FreeBSD Project.<BR> Copyright Š<BR> FreeBSD 4.3-Release #0 Thur Nov 1 17:24:04 EST 2001<BR> .<BR> .<BR> .<BR> available memory = 258543616 )252484 K Bytes)<BR> Preloaded elf kernel "kernel" at 0xc02cd000<BR> Preloaded userconfig-script "/boot/kernel.conf" at 0xc02cd0a8<BR> Pentium Pro MTRR support enabled<BR> md0: Malloc disk<BR> npx0: <math processor> on motherboard<BR> npx0: INT 16 interface<BR> pcib0: <HOST to PC Bridge> on motherboard<BR> pci0: <pci bus> on pcib0:<BR> pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI at device 1.0 on pci0<BR> pci1: <PCI bus> on pcib2<BR> pci1: <NVIDIA Riva Vanta TNT2 graphics Accel> at 0.0 irq 11<BR> isab0: <VIA 82C596B PCI-ISA bridge> at device 4.0 on pci0<BR> isa0: <ISA bus> on isab0<BR> atapci0: <VIA 82C596 ATA66 Controller> port 0xd800 0xd80f at dev 4.1 on pci0<BR> ata0: at 0x1f0 irq 14 on atapci0<BR> ata1: at 0x170 irq 15 on atapci0<BR> uhci0: <VIA 83C572 USB controller> port 0xd400 0xd41f irq 9 at dev 4.2<BR> usb0: <VIA83C572 USB Controller> on uhci0<BR> usb0: USB revision 1.0<BR> uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00 addr 1<BR> uhub0: 2 ports with 2 removable, self powered<BR> uhub1: ALCOR Generic USB hub, class 9/0, rev 1.110/1.00, addr 2<BR> uhub1: 4 ports with 4 removable, self powered<BR> rl0: <Accton MPX 5030/5038 10/100BaseTX> at dev 10.0 on pci0<BR> rl0: couldnąt map ports/memory<BR> device_probe_and_attach: rl0 attach returned 6<BR> pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.0<BR> pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.1<BR> pci0: <unknown card> (vendor=0x127a, dev=0x4310) at 11.2<BR> pcb1: <Host to PCI bridge> on motherboard<BR> pci2: <PCI bus> on pcib1<BR> fdc0: <NEC 72065B> at port 0x3f0 0x3f5, 0x3f7 irq 6 drq 2 on isa0:<BR> fdc0: fifo enabled, 8 byte threshold<BR> fd0: <1440-KB 3.5" drive> on fdc0: drive 0<BR> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0<BR> .<BR> .rest of information is as usual<BR> .<BR> ifconfigure: interface rl0 does not exist<BR> ifconfigure: interface rl0 does not exist<BR> <BR> Mounting root from ufs:/dev/ad0s2a<BR> .<BR> .<BR> .<BR> login:<BR> <BR> <BR> I have looked at all the manuals and the faq, so what am I missing? Thanks for any assistance.<BR> <BR> Allen Richon<BR> <BR> </FONT><BR> </BODY> </HTML>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B8081DD6.2521%arichon>