Date: Sun, 1 Oct 2000 03:54:23 +0100 From: Jose Gabriel J Marcelino <gabriel@maquina.com> To: mobile@freebsd.org Subject: Aironet PCCard problem Message-ID: <20001001035423.B46019@devils.maquina.com>
next in thread | raw e-mail | index | archive | help
Hi,
I recently bought an Asus MP8300 series 600Mhz notebook, which works pretty well
under FreeBSD (suspend to disk works, it's SMI VGA card is supported in XFree86,
built-in Intel EtherExpress 10/100 chip, 440MX AC97 audio supported under the
pre-release ICH driver)
I decided to try Wireless LAN and I got a Cisco Aironet 340 PC Card along with
the PCI version for the desktop machine. On the desktop machine everything went
very well, but on the notebook I have a big problem:
Whenever I insert the Aironet PC Card the machine stops accepting further
input. However the kernel is still working since I can ping the machine over the
regular ethernet, and it still accepts socket connections but it does not fork
the needed process. The keyboard is dead, but I can see kernel messages on the
screen, like the ICMP bandwith control warning, etc.
This was under 4.1-RELEASE, 4.1-STABLE and even under 5.0-PRE_SMPNG to which I
recently upgraded.
I also tried inserting the card without the pccardd daemon running but with the
same results. This machine only has one PC Card slot so I could't try it on any
other slot.
I've tried to search most of the lists, but I couldn't find solution that could
work. Please note that this notebook has a PhoenixBIOS whose IO configuration is
only the selection of "Operating System (Windows/Other)"
I also tried the card under Windows 98 and it worked as well as it could under
Windows. There was something strange, if I did a soft reboot from Windows into
FreeBSD, FreeBSD wouldn't find the pcic0 or pccard0 devices, just the pcic-pci0.
Here is my dmesg:
------------------------------------------------------------------------
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #12: Sun Oct 1 01:46:14 WEST 2000
root@minime.maquina.com:/usr/src/sys/compile/MINIME
Calibrating clock(s) ... TSC clock: 501142087 Hz, i8254 clock: 1193195 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory = 201261056 (196544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x005f5000 - 0x0bfe7fff, 194981888 bytes (47603 pages)
avail memory = 189775872 (185328K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6bf0
bios32: Entry = 0xfd762 (c00fd762) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd760+0x227
pnpbios: Found PnP BIOS data at 0xc00f6c20
pnpbios: Entry = f0000:ad75 Rev = 1.0
pnpbios: Event flag at 400
Other BIOS signatures found:
Preloaded elf kernel "kernel.ko" at 0xc05dc000.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 53 00 00 c0 00 00 00 00 70 92
00 c0 80 00 00 02 83 00 00 c0 83 00 00 c0 83 00
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc00c9270 (c0009270)
VESA: Silicon Motion SM720 VGA BIOS
VESA: SM720 SM720 SM720
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443MX host to PCI bridge> on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x7194, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7195, revid=0x00
bus=0, slot=0, func=1
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 4, range 32, base 0000fc00, size 6, enabled
found-> vendor=0x0000, dev=0x0000, revid=0x00
bus=0, slot=0, func=2
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x126f, dev=0x0720, revid=0xb1
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x7198, revid=0x01
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7199, revid=0x00
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 4, range 32, base 0000fc90, size 4, enabled
found-> vendor=0x8086, dev=0x719a, revid=0x00
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=11
map[20]: type 4, range 32, base 0000fca0, size 5, enabled
found-> vendor=0x8086, dev=0x719b, revid=0x00
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1668, dev=0x0100, revid=0x11
bus=0, slot=9, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x1180, dev=0x0475, revid=0x80
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
pci0: <PCI bus> on pcib0
pcm0: <Intel 443MX AC'97 audio> port 0xfc00-0xfc3f,0xf800-0xf8ff irq 5 at device 0.1 on pci0
pcm0: ac97 codec id 0x41445348 (Analog Devices 1881)
pcm0: ac97 codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: ac97 primary codec extended features variable rate PCM
pcm: setmap b000, 10000; 0xc988d000 -> b000
pcm0: setmap(0x1b000, 0x100)
pcm0: Play codec support rate(Hz): 8000 11025 16000 22050 44100 48000
pcm: setmap 2b000, 10000; 0xc98ad000 -> 2b000
pcm0: setmap(0x3b000, 0x100)
pcm0: Record codec support rate(Hz): 8000 11025 16000 22050 44100 48000
pci0: <unknown card> (vendor=0x0000, dev=0x0000) at 0.2
pci0: <VGA-compatible display device> (vendor=0x126f, dev=0x0720) at 2.0 irq 11
isab0: <Intel 82443MX PCI to X-bus bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfc90
ata0: mask=03 status0=50 status1=50
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x9
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfc98
ata1: mask=00 status0=ff status1=ff
ata1: probe allocation failed
uhci0: <Intel 82443MX USB controller> port 0xfca0-0xfcbf irq 11 at device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82443MX SMBus and power management controller> (vendor=0x8086, dev=0x719b) at 7.3
pcib1: <PCI to PCI bridge (vendor=1668 device=0100)> at device 9.0 on pci0
pci1: physical bus=1
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=1, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f7ffe000, size 12, enabled
map[14]: type 4, range 32, base 0000ecc0, size 6, enabled
map[18]: type 1, range 32, base f7e00000, size 20, enabled
found-> vendor=0x11c1, dev=0x0448, revid=0x01
bus=1, slot=8, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f7fff800, size 8, enabled
map[14]: type 4, range 32, base 0000ecb8, size 3, enabled
map[18]: type 4, range 32, base 0000e800, size 8, enabled
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xf7e00000-0xf7efffff,0xf7ffe000-0xf7ffefff irq 11 at device 4.0 on pci1
using shared irq11.
fxp0: Ethernet address 00:20:e0:63:a5:4e
bpf: fxp0 attached
pci1: <unknown card> (vendor=0x11c1, dev=0x0448) at 8.0 irq 11
pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0
pcic-pci0: Legacy address set to 0x3e0
PCI Config space:
00: 04751180 02100007 06070080 00020000
10: 00000000 020000dc 00000000 00000000
20: 00000000 00000000 00000000 00000000
30: 00000000 00000000 00000000 008001ff
40: 00000000 000003e1 00000000 00000000
50: 00000000 00000000 00000000 00000000
60: 00000000 00000000 00000000 00000000
70: 00000000 00000000 00000000 00000000
80: 00800000 00000000 04630463 30000000
90: 00000000 00000000 00000000 00000000
Cardbus Socket registers:
00: f000ff53: f000ff53: f000e2c3: f000ff53:
10: f000ff53: f000ff54: f000a377: f000ff53:
ExCa registers:
00: eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a 66 3d ff 03
10: 00 00 fb 77 44 86 c4 c0 c8 02 08 e8 40 91 88 fe
20: 28 e0 8a 66 02 38 e0 72 02 88 e0 bf 05 00 c4 5e
30: 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c 30 e4 cd 13
acpi0: <PTLTD > on motherboard
acpi0: at 0xb2 irq 9
ata-: ata0 already exists, using ata2 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 19 devices, largest 238 bytes
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xd8000-0xfffff, size=0x28000
PNP0c01: adding fixed memory32 range 0x100000-0xbffffff, size=0xbf00000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1
PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x74-0x77, size=0x4, align=0x1
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0x290-0x297, size=0x8, align=0x1
PNP0c02: adding io range 0x398-0x399, size=0x2, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000
PNP0c02: end config
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNPb02f: adding io range 0x200-0x207, size=0x8, align=0x1
PNPb02f: end config
pnpbios: handle 2 device ID PNPb02f (2fb0d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 4 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
PNP0100: end config
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
PNP0303: end config
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x8000-0x803f, size=0x40, align=0x1
PNP0c02: adding io range 0x2180-0x218f, size=0x10, align=0x1
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 16 device ID PNP0400 (0004d041)
CAN0002: adding io range 0x2f8-0x2ff, size=0x8, align=0x1
CAN0002: adding irq mask 0x8
CAN0002: end config
pnpbios: handle 17 device ID CAN0002 (02002e0c)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 18 device ID PNP0f13 (130fd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 22 device ID PNP0700 (0007d041)
PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
PNP0e03: end config
pnpbios: handle 23 device ID PNP0e03 (030ed041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 53 81
bf 1f 00 4f 0e 0f 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 53 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0: <Intel i82365> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pcic1: Cannot get I/O range
pcic1 failed to probe at port 0x3e0-0x3e1 on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at port 0x80,0x10-0x18,0x1f,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x50-0x52,0x74-0x77,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xb1,0xb4-0xb5,0xb8-0xb9,0xbc-0xbd,0x72-0x73,0xb2-0xb3 iomem 0xfff80000-0xffffffff on isa0
unknown: <PNPb02f> failed to probe at port 0x200-0x207 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <CAN0002> can't assign resources
unknown: <CAN0002> at port 0x2f8-0x2ff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0e03> can't assign resources
unknown: <PNP0e03> at port 0x3e0-0x3e1 on isa0
BIOS Geometries:
0:0306ef3f 0..774=775 cylinders, 0..239=240 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 684840, tty 6310ba, net 6718ba
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-master: success setting UDMA2 on PIIX4 chip
ad0: <IBM-DARA-206000/AR2OA51A> ATA-4 disk at ata0 as master
ad0: 5729MB (11733120 sectors), 12416 cyls, 15 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
Creating DISK ad0
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting UDMA2 on PIIX4 chip
acd0: <TOSHIBA CD-ROM XM-7002Bc/1110> CDROM drive at ata0 as slave
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0xb, start 63, end = 2056319, size 2056257 : OK
ad0s2: type 0xa5, start 2056320, end = 11309759, size 9253440 : OK
ad0s4: type 0xa0, start 11309760, end = 11733119, size 423360 : OK
start_init: trying /sbin/init
Old-style KLD file green_saver found
splash: image decoder found: green_saver
link_elf: symbol exit undefined
pid 198 (ldconfig), uid 0: exited on signal 11 (core dumped)
Also here is my pccard.conf
-------------------------------------------------------------------------------
# Generally available IO ports io 0x280-0x2F0 0x300-0x360 # Generally
available IRQs (Built-in sound-card owners remove 5) irq 15 # Available
memory slots memory 0xd4000 96k
########## an ##########
# Aironet PC4500 2Mbps 802.11 wireless NIC card "Aironet" "PC4500" config 0x5
"an" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device
delete
# Aironet PC4800 11Mbps 802.11 wireless NIC card "Aironet" "PC4800" config 0x5
"an" ? insert /etc/pccard_ether $device remove /sbin/ifconfig $device
delete
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001001035423.B46019>