Date: Tue, 25 Feb 2003 08:34:23 +0000 (WET) From: Paulo Menezes <pm@asimov.isr.uc.pt> To: Scott Mitchell <scott+freebsd@fishballoon.org> Cc: Kevin Oberman <oberman@es.net>, "" <freebsd-stable@FreeBSD.ORG> Subject: Re: Xircom combo ethernet+modem Message-ID: <20030225082700.J1175@asimov.isr.uc.pt> In-Reply-To: <20030224212318.GA561@tuatara.fishballoon.org> References: <20030224183334.4BAE65D04@ptavv.es.net> <20030224184613.E99977@asimov.isr.uc.pt> <20030224212318.GA561@tuatara.fishballoon.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Mon, 24 Feb 2003, Scott Mitchell wrote:
>
> Hi Paulo,
>
> I think you're doing everything right but running into some longstanding
> bugs in the driver. There's pretty clearly something going wrong with the
> probe routine -- that MAC address is obviously wrong :-(
>
> I'm actually working on some updates to the xe driver right now, fixing the
> known bugs with the CE3/REM56 cards first, then I plan to have a look at
> the probe/initialisation problems with the CE2-based cards like yours. I
> finally got hold of a few older cards, so I'm reasonably hopeful of getting
> it working this time...
>
> I don't suppose you could post the output of 'pccardc dumpcis' for your
> card, in case there's something unusual about it? Are there any other
> messages from the driver after the ones you've shown us already?
>
Fortunately I could borrow a second card that works quite well, and so
here goes the dumpcis and dmesg output. Of course these will reflect both
cards.
Although I can use the other card, I got some king of re-probing messages
and these are reflected in the last two lines of dmesg.
The messages on the screen were
#tail /var/log/messages
Feb 25 09:¹8:02 sbãhelkhir þccãrðð[¹³5³]: þccãrðð stãrteð
Feb 25 09:¹8:56 sbãhelkhir þccãrðð[¹³6¹]: ©ãrð ¨Xircøm¨(¨©reðit©ãrð
Ëthernet+Møð
em 28.8¨) [©ËM28] [³.00] mãtcheð ¨Xircøm¨ (¨©reðit©ãrð Ëthernet+Møðem
28.8¨) [(n
ull)] [(null)]
Feb 25 09:¹9:0¹ sbãhelkhir /kernel: þccãrð0: ©ãn nøt ãttãch møre thãn øne
chilð.
Feb 25 09:¹9:0¹ sbãhelkhir þccãrðð[¹³6¹]: ðriver ãlløcãtiøn fãileð før
Xircøm(©r
eðit©ãrð Ëthernet+Møðem 28.8): Ïnþut/øutþut errør
Feb 25 09:¹9:06 sbãhelkhir þccãrðð[¹³6¹]: ©ãrð ¨àuãl Sþeeð¨(¨¹0/¹00 Þ©
©ãrð¨) [¹
.0] [ ] mãtcheð ¨àuãl Sþeeð¨ (¨/¹0/¹00( Þørt Ãttãcheð)? Þ© ©ãrð/¨)
[(null)] [(nu
ll)]
Feb 25 09:¹9:¹¹ sbãhelkhir /kernel: þccãrð¹: ©ãn nøt ãttãch møre thãn øne
chilð.
Feb 25 09:¹9:¹¹ sbãhelkhir þccãrðð[¹³6¹]: ðriver ãlløcãtiøn fãileð før
àuãl Sþee
ð(/¹0/¹00( Þørt Ãttãcheð)? Þ© ©ãrð/): Ïnþut/øutþut errør
Feb 25 09:¹9:¹¹ sbãhelkhir þccãrðð[¹³6¹]: þccãrðð stãrteð
sbãhelkhir#
Thank you again,
Paulo
[-- Attachment #2 --]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-PRERELEASE #0: Mon Feb 24 17:30:44 CET 2003
root@sbahelkhir.casa:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (133.64-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
config> enable apm
config> quit
avail memory = 26902528 (26272K bytes)
Preloaded elf kernel "kernel" at 0xc05bd000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc05bd09c.
Preloaded elf module "vesa.ko" at 0xc05bd0ec.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc05bd188.
Preloaded elf module "snd_ess.ko" at 0xc05bd1d8.
Preloaded elf module "snd_sbc.ko" at 0xc05bd278.
Preloaded elf module "snd_pcm.ko" at 0xc05bd318.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 2048k memory, flags:0x0, mode table:0xc05202a0 (1000040)
VESA: CHIPS 65550 Super VGA
md0: Malloc disk
Using $PIR table, 4 entries at 0xc00f6940
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI to ISA bridge (vendor=10b9 device=1523)> at device 2.0 on pci0
isa0: <ISA bus> on isab0
pci_cfgintr_linked: linked (1) to hard-routed irq 10
pci_cfgintr: 0:4 INTA routed to irq 10
pcic0: <TI PCI-1130 PCI-CardBus Bridge> mem 0x88000000-0x88000fff irq 10 at device 4.0 on pci0
pcic0: TI113X PCI Config Reg: [CSC parallel isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (4) to hard-routed irq 10
pci_cfgintr: 0:4 INTB routed to irq 10
pcic1: <TI PCI-1130 PCI-CardBus Bridge> mem 0x88001000-0x88001fff irq 10 at device 4.1 on pci0
pcic1: TI113X PCI Config Reg: [CSC parallel isa irq]
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci0: <Chips & Technologies 65550 SVGA controller> at 6.0
atapci0: <Generic PCI ATA controller> port 0xfcf0-0xfcff,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1ff irq 14 at device 7.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sbc0: <ESS ES1878> at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,0 on isa0
pcm0: <ESS 18xx DSP> on sbc0
ad0: 4126MB <HITACHI_DK238A-43> [8944/15/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
sio4 at port 0x2e8-0x2ef iomem 0xd4000-0xd5fff irq 10 flags 0x40000 slot 0 on pccard0
sio4: type 16450
sio4: unable to activate interrupt in fast mode - using normal mode
sio4: unloaded
sio4: detached
pccard: card removed, slot 0
pccard: card inserted, slot 0
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 10 slot 0 on pccard0
xe0: Xircom CEM3, bonding version 0x10, with modem
xe0: CE2 version = 0
xe0: Ethernet address 00:00:00:00:00:00
module_register: module pccard/xe already exists!
linker_file_sysinit "if_xe.ko" failed to register! 17
xe0: detached
pccard: card removed, slot 0
pccard: card inserted, slot 1
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 10 slot 1 on pccard1
xe0: Xircom CEM3, bonding version 0, with modem
xe0: CE2 version = 0
xe0: Ethernet address 00:00:00:00:00:00
xe0: detached
pccard: card removed, slot 1
pccard: card inserted, slot 1
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 10 slot 1 on pccard1
xe0: Xircom CEM3, bonding version 0, with modem
xe0: CE2 version = 0
xe0: Ethernet address 00:00:00:00:00:00
xe0: detached
pccard: card removed, slot 1
pccard: card inserted, slot 1
ed1 at port 0x300-0x31f iomem 0xd4000-0xd5fff irq 10 flags 0x80000 slot 1 on pccard1
ed1: address 00:e0:98:34:0f:61, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pccard: card inserted, slot 0
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 10 slot 0 on pccard0
xe0: Xircom CEM3, bonding version 0x10, with modem
xe0: CE2 version = 0
xe0: Ethernet address 00:00:00:00:00:00
pccard0: Can not attach more than one child.
pccard1: Can not attach more than one child.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030225082700.J1175>