Date: Thu, 25 Oct 2012 10:06:40 +0200 From: =?iso-8859-1?Q?R=E9mi_Pauchet?= <remi.pauchet@netasq.com> To: freebsd-net@freebsd.org Subject: panic ixgbevf / SMP under high network load Message-ID: <B722D1A8-AA5F-4B80-8F84-B3935D72A498@netasq.com>
next in thread | raw e-mail | index | archive | help
--Apple-Mail=_2CDDC20C-82C3-41DC-9607-42B13FA6F0F1
Content-Type: multipart/mixed;
boundary="Apple-Mail=_E43D5A19-1FB8-4DA3-AD2B-AF15B1B08D3C"
--Apple-Mail=_E43D5A19-1FB8-4DA3-AD2B-AF15B1B08D3C
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=iso-8859-1
Hi
I'm testing network performance of FreeBSD using vmware esxi 5.1 with =
SR-IOV
I'm using FreeBSD 8.3 kernel GENERIC, 4 cpus, ixgbevf driver with an =
Intel 82599EB dual 10 Gbps network interface
After a few seconds of udp ipv4 load (5Gbps x2, frame size 700), I have =
the following panic :
(kgdb) bt
#0 doadump () at pcpu.h:224
#1 0xffffffff8060ab90 in boot (howto=3D260) at =
/usr/src/sys/kern/kern_shutdown.c:441
#2 0xffffffff8060b031 in panic (fmt=3DVariable "fmt" is not available.
) at /usr/src/sys/kern/kern_shutdown.c:614
#3 0xffffffff80900b80 in trap_fatal (frame=3D0xc, eva=3DVariable "eva" =
is not available.
) at /usr/src/sys/amd64/amd64/trap.c:825
#4 0xffffffff80900ed1 in trap_pfault (frame=3D0xffffff800016a620, =
usermode=3D0) at /usr/src/sys/amd64/amd64/trap.c:741
#5 0xffffffff8090138f in trap (frame=3D0xffffff800016a620) at =
/usr/src/sys/amd64/amd64/trap.c:478
#6 0xffffffff808e88e4 in calltrap () at =
/usr/src/sys/amd64/amd64/exception.S:228
#7 0xffffffff80667ef7 in m_copym (m=3D0x0, off0=3D1500, len=3D1480, =
wait=3D1) at /usr/src/sys/kern/uipc_mbuf.c:542
#8 0xffffffff8071c8c2 in ip_fragment (ip=3D0xffffff0001a3700e, =
m_frag=3D0xffffff800016a838, mtu=3DVariable "mtu" is not available.
) at /usr/src/sys/netinet/ip_output.c:819
#9 0xffffffff8071d93a in ip_output (m=3D0xffffff00019fd900, =
opt=3DVariable "opt" is not available.
) at /usr/src/sys/netinet/ip_output.c:650
#10 0xffffffff8071a13a in ip_forward (m=3D0xffffff00019fd900, =
srcrt=3DVariable "srcrt" is not available.
) at /usr/src/sys/netinet/ip_input.c:1521
#11 0xffffffff8071b77c in ip_input (m=3D0xffffff00019fd900) at =
/usr/src/sys/netinet/ip_input.c:729
#12 0xffffffff806c652e in netisr_dispatch_src (proto=3D1, =
source=3DVariable "source" is not available.
) at /usr/src/sys/net/netisr.c:859
#13 0xffffffff806bc5cd in ether_demux (ifp=3D0xffffff000168e800, =
m=3D0xffffff00019fd900) at /usr/src/sys/net/if_ethersubr.c:896
#14 0xffffffff806bc9d7 in ether_input (ifp=3D0xffffff000168e800, =
m=3D0xffffff00019fd900) at /usr/src/sys/net/if_ethersubr.c:755
#15 0xffffffff803ee03e in ixv_rxeof (que=3D0xffffff0001643880, =
count=3D117) at /usr/src/sys/dev/ixgbe/ixv.c:3256
#16 0xffffffff803ef50b in ixv_handle_que (context=3DVariable "context" =
is not available.
) at /usr/src/sys/dev/ixgbe/ixv.c:983
#17 0xffffffff806496d5 in taskqueue_run_locked =
(queue=3D0xffffff0001698200) at /usr/src/sys/kern/subr_taskqueue.c:250
#18 0xffffffff8064986e in taskqueue_thread_loop (arg=3DVariable "arg" is =
not available.
) at /usr/src/sys/kern/subr_taskqueue.c:387
#19 0xffffffff805dfc9f in fork_exit (callout=3D0xffffffff80649820 =
<taskqueue_thread_loop>, arg=3D0xffffff00016438d8, =
frame=3D0xffffff800016ac50) at /usr/src/sys/kern/kern_fork.c:876
#20 0xffffffff808e8e2e in fork_trampoline () at =
/usr/src/sys/amd64/amd64/exception.S:602
I have no issue with only one cpu (but low network performance)
Please find the dmesg in attachment
Regards,
R=E9mi Pauchet
--Apple-Mail=_E43D5A19-1FB8-4DA3-AD2B-AF15B1B08D3C
Content-Disposition: attachment;
filename=dmesg.txt
Content-Type: text/plain;
x-unix-mode=0644;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE #0: Fri Oct 5 11:38:23 CEST 2012
root@bsd:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU W3680 @ 3.33GHz (3324.21-MHz =
K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x206c2 Family =3D 6 Model =3D 2c =
Stepping =3D 2
=
Features=3D0xfa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS>
=
Features2=3D0x82982203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESN=
I,HV>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 1073741824 (1024 MB)
avail memory =3D 1016238080 (969 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 4 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL 440BX> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
ixgbe_probe: begin
ixgbe_probe: begin
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ixgbe_probe: begin
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ixgbe_probe: begin
atapci0: <Intel PIIX4 UDMA33 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
ixgbe_probe: begin
pci0: <bridge> at device 7.3 (no driver attached)
ixgbe_probe: begin
pci0: <base peripheral> at device 7.7 (no driver attached)
ixgbe_probe: begin
vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem =
0xd8000000-0xdbffffff,0xd0800000-0xd0ffffff irq 16 at device 15.0 on =
pci0
ixgbe_probe: begin
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem =
0xd0040000-0xd005ffff,0xd0020000-0xd003ffff irq 17 at device 16.0 on =
pci0
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.2.0.0
ixgbe_probe: begin
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ixgbe_probe: begin
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.4> port =
0x2000-0x203f mem 0xd1020000-0xd103ffff,0xd1000000-0xd100ffff irq 18 at =
device 0.0 on pci2
em0: Memory Access and/or Bus Master bits were not set!
em0: [FILTER]
em0: Ethernet address: 00:0c:29:5b:2a:ab
ixgbe_probe: begin
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ixgbe_probe: begin
ix0: <Intel(R) PRO/10GbE Virtual Function Network Driver, Version - =
1.1.2> mem 0xd2404000-0xd2407fff,0xd2400000-0xd2403fff at device 0.0 on =
pci3
ix0: Using MSIX interrupts with 2 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: Ethernet address: 00:0c:29:5b:2a:10
ixgbe_probe: begin
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci4: <ACPI PCI bus> on pcib4
ixgbe_probe: begin
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci5: <ACPI PCI bus> on pcib5
ixgbe_probe: begin
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci6: <ACPI PCI bus> on pcib6
ixgbe_probe: begin
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pci7: <ACPI PCI bus> on pcib7
ixgbe_probe: begin
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pci8: <ACPI PCI bus> on pcib8
ixgbe_probe: begin
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pci9: <ACPI PCI bus> on pcib9
ixgbe_probe: begin
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pci10: <ACPI PCI bus> on pcib10
ixgbe_probe: begin
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci11: <ACPI PCI bus> on pcib11
ixgbe_probe: begin
ix1: <Intel(R) PRO/10GbE Virtual Function Network Driver, Version - =
1.1.2> mem 0xd2504000-0xd2507fff,0xd2500000-0xd2503fff at device 0.0 on =
pci11
ix1: Using MSIX interrupts with 2 vectors
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: Ethernet address: 00:0c:29:5b:2a:11
ixgbe_probe: begin
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pci12: <ACPI PCI bus> on pcib12
ixgbe_probe: begin
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pci13: <ACPI PCI bus> on pcib13
ixgbe_probe: begin
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pci14: <ACPI PCI bus> on pcib14
ixgbe_probe: begin
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
pci15: <ACPI PCI bus> on pcib15
ixgbe_probe: begin
pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
pci16: <ACPI PCI bus> on pcib16
ixgbe_probe: begin
pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
pci17: <ACPI PCI bus> on pcib17
ixgbe_probe: begin
pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
pci18: <ACPI PCI bus> on pcib18
ixgbe_probe: begin
pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci19: <ACPI PCI bus> on pcib19
ixgbe_probe: begin
pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
pci20: <ACPI PCI bus> on pcib20
ixgbe_probe: begin
pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
pci21: <ACPI PCI bus> on pcib21
ixgbe_probe: begin
pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
pci22: <ACPI PCI bus> on pcib22
ixgbe_probe: begin
pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
pci23: <ACPI PCI bus> on pcib23
ixgbe_probe: begin
pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
pci24: <ACPI PCI bus> on pcib24
ixgbe_probe: begin
pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
pci25: <ACPI PCI bus> on pcib25
ixgbe_probe: begin
pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
pci26: <ACPI PCI bus> on pcib26
ixgbe_probe: begin
pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci27: <ACPI PCI bus> on pcib27
ixgbe_probe: begin
pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
pci28: <ACPI PCI bus> on pcib28
ixgbe_probe: begin
pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
pci29: <ACPI PCI bus> on pcib29
ixgbe_probe: begin
pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
pci30: <ACPI PCI bus> on pcib30
ixgbe_probe: begin
pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
pci31: <ACPI PCI bus> on pcib31
ixgbe_probe: begin
pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
pci32: <ACPI PCI bus> on pcib32
ixgbe_probe: begin
pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
pci33: <ACPI PCI bus> on pcib33
ixgbe_probe: begin
pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
pci34: <ACPI PCI bus> on pcib34
acpi_acad0: <AC Adapter> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROMs> at iomem =
0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 10.000 msec
acd0: DVDR <VMware Virtual IDE CDROM Drive/00000001> at ata1-master =
UDMA33=20
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device=20
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
VMware memory control driver initialized
Fatal trap 12: page fault while in kernel mode
cpuid =3D 2; apic id =3D 02
fault virtual address =3D 0x18
fault code =3D supervisor read data, page not present
instruction pointer =3D 0x20:0xffffffff80667ef7
stack pointer =3D 0x28:0xffffff800016a6d0
frame pointer =3D 0x28:0xffffff800016a730
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 0 (ix0 que)
trap number =3D 12
panic: page fault
cpuid =3D 2
KDB: stack backtrace:
#0 0xffffffff8063de2e at kdb_backtrace+0x5e
#1 0xffffffff8060b047 at panic+0x187
#2 0xffffffff80900b80 at trap_fatal+0x290
#3 0xffffffff80900ed1 at trap_pfault+0x201
#4 0xffffffff8090138f at trap+0x3df
#5 0xffffffff808e88e4 at calltrap+0x8
#6 0xffffffff8071c8c2 at ip_fragment+0x132
#7 0xffffffff8071d93a at ip_output+0xd7a
#8 0xffffffff8071a13a at ip_forward+0x2ea
#9 0xffffffff8071b77c at ip_input+0x52c
#10 0xffffffff806c652e at netisr_dispatch_src+0x7e
#11 0xffffffff806bc5cd at ether_demux+0x14d
#12 0xffffffff806bc9d7 at ether_input+0x197
#13 0xffffffff803ee03e at ixv_rxeof+0x19e
#14 0xffffffff803ef50b at ixv_handle_que+0x9b
#15 0xffffffff806496d5 at taskqueue_run_locked+0x85
#16 0xffffffff8064986e at taskqueue_thread_loop+0x4e
#17 0xffffffff805dfc9f at fork_exit+0x11f
Uptime: 1m10s
Dumping 89 out of 1008 MB:
Fatal trap 12: page fault while in kernel mode
cpuid =3D 2; apic id =3D 02
fault virtual address =3D 0x18
fault code =3D supervisor read data, page not present
instruction pointer =3D 0x20:0xffffffff80667ef7
stack pointer =3D 0x28:0xffffff80001866d0
frame pointer =3D 0x28:0xffffff8000186730
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 0 (ix1 que)
trap number =3D 12
panic: page fault
cpuid =3D 2
Fatal trap 12: page fault while in kernel mode
cpuid =3D 3; apic id =3D 03
fault virtual address =3D 0x18
fault code =3D supervisor write data, page not present
instruction pointer =3D 0x20:0xffffffff803edf6a
stack pointer =3D 0x28:0xffffff8000165a40
frame pointer =3D 0x28:0xffffff8000165af0
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags =3D interrupt enabled, resume, IOPL =3D 0
current process =3D 12 (irq256: ix0:que 0)
trap number =3D 12
interrupt storm detected on "irq258:"; throttling interrupt source
interrupt storm detected on "irq258:"; throttling interrupt source
panic: bufwrite: buffer is not busy???
cpuid =3D 2
..18%interrupt storm detected on "irq258:"; throttling interrupt source
interrupt storm detected on "irq258:"; throttling interrupt source
..36%interrupt storm detected on "irq258:"; throttling interrupt source
interrupt storm detected on "irq258:"; throttling interrupt source
..54%interrupt storm detected on "irq258:"; throttling interrupt source
interrupt storm detected on "irq258:"; throttling interrupt source
..72%interrupt storm detected on "irq258:"; throttling interrupt source
interrupt storm detected on "irq258:"; throttling interrupt source
..90%interrupt storm detected on "irq258:"; throttling interrupt source
Dump complete
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.3-RELEASE #0: Fri Oct 5 11:38:23 CEST 2012
root@bsd:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU W3680 @ 3.33GHz (3324.21-MHz =
K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x206c2 Family =3D 6 Model =3D 2c =
Stepping =3D 2
=
Features=3D0xfa3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,=
MCA,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS>
=
Features2=3D0x82982203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESN=
I,HV>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 1073741824 (1024 MB)
avail memory =3D 1016238080 (969 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 4 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL 440BX> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
ixgbe_probe: begin
ixgbe_probe: begin
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ixgbe_probe: begin
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ixgbe_probe: begin
atapci0: <Intel PIIX4 UDMA33 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
ixgbe_probe: begin
pci0: <bridge> at device 7.3 (no driver attached)
ixgbe_probe: begin
pci0: <base peripheral> at device 7.7 (no driver attached)
ixgbe_probe: begin
vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem =
0xd8000000-0xdbffffff,0xd0800000-0xd0ffffff irq 16 at device 15.0 on =
pci0
ixgbe_probe: begin
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem =
0xd0040000-0xd005ffff,0xd0020000-0xd003ffff irq 17 at device 16.0 on =
pci0
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.2.0.0
ixgbe_probe: begin
pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ixgbe_probe: begin
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.4> port =
0x2000-0x203f mem 0xd1020000-0xd103ffff,0xd1000000-0xd100ffff irq 18 at =
device 0.0 on pci2
em0: Memory Access and/or Bus Master bits were not set!
em0: [FILTER]
em0: Ethernet address: 00:0c:29:5b:2a:ab
ixgbe_probe: begin
pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ixgbe_probe: begin
ix0: <Intel(R) PRO/10GbE Virtual Function Network Driver, Version - =
1.1.2> mem 0xd2404000-0xd2407fff,0xd2400000-0xd2403fff at device 0.0 on =
pci3
ix0: Using MSIX interrupts with 2 vectors
ix0: [ITHREAD]
ix0: [ITHREAD]
ix0: Ethernet address: 00:0c:29:5b:2a:10
ixgbe_probe: begin
pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci4: <ACPI PCI bus> on pcib4
ixgbe_probe: begin
pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci5: <ACPI PCI bus> on pcib5
ixgbe_probe: begin
pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci6: <ACPI PCI bus> on pcib6
ixgbe_probe: begin
pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
pci7: <ACPI PCI bus> on pcib7
ixgbe_probe: begin
pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
pci8: <ACPI PCI bus> on pcib8
ixgbe_probe: begin
pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
pci9: <ACPI PCI bus> on pcib9
ixgbe_probe: begin
pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
pci10: <ACPI PCI bus> on pcib10
ixgbe_probe: begin
pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
pci11: <ACPI PCI bus> on pcib11
ixgbe_probe: begin
ix1: <Intel(R) PRO/10GbE Virtual Function Network Driver, Version - =
1.1.2> mem 0xd2504000-0xd2507fff,0xd2500000-0xd2503fff at device 0.0 on =
pci11
ix1: Using MSIX interrupts with 2 vectors
ix1: [ITHREAD]
ix1: [ITHREAD]
ix1: Ethernet address: 00:0c:29:5b:2a:11
ixgbe_probe: begin
pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
pci12: <ACPI PCI bus> on pcib12
ixgbe_probe: begin
pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
pci13: <ACPI PCI bus> on pcib13
ixgbe_probe: begin
pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
pci14: <ACPI PCI bus> on pcib14
ixgbe_probe: begin
pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
pci15: <ACPI PCI bus> on pcib15
ixgbe_probe: begin
pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
pci16: <ACPI PCI bus> on pcib16
ixgbe_probe: begin
pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
pci17: <ACPI PCI bus> on pcib17
ixgbe_probe: begin
pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
pci18: <ACPI PCI bus> on pcib18
ixgbe_probe: begin
pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
pci19: <ACPI PCI bus> on pcib19
ixgbe_probe: begin
pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
pci20: <ACPI PCI bus> on pcib20
ixgbe_probe: begin
pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
pci21: <ACPI PCI bus> on pcib21
ixgbe_probe: begin
pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
pci22: <ACPI PCI bus> on pcib22
ixgbe_probe: begin
pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
pci23: <ACPI PCI bus> on pcib23
ixgbe_probe: begin
pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
pci24: <ACPI PCI bus> on pcib24
ixgbe_probe: begin
pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
pci25: <ACPI PCI bus> on pcib25
ixgbe_probe: begin
pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
pci26: <ACPI PCI bus> on pcib26
ixgbe_probe: begin
pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
pci27: <ACPI PCI bus> on pcib27
ixgbe_probe: begin
pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
pci28: <ACPI PCI bus> on pcib28
ixgbe_probe: begin
pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
pci29: <ACPI PCI bus> on pcib29
ixgbe_probe: begin
pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
pci30: <ACPI PCI bus> on pcib30
ixgbe_probe: begin
pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
pci31: <ACPI PCI bus> on pcib31
ixgbe_probe: begin
pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
pci32: <ACPI PCI bus> on pcib32
ixgbe_probe: begin
pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
pci33: <ACPI PCI bus> on pcib33
ixgbe_probe: begin
pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
pci34: <ACPI PCI bus> on pcib34
acpi_acad0: <AC Adapter> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
qpi0: <QPI system bus> on motherboard
orm0: <ISA Option ROMs> at iomem =
0xc0000-0xc7fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 10.000 msec
acd0: DVDR <VMware Virtual IDE CDROM Drive/00000001> at ata1-master =
UDMA33=20
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device=20
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 8192MB (16777216 512 byte sectors: 255H 63S/T 1044C)
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /tmp: mount pending error: blocks 16 files 4
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
VMware memory control driver initialized
em0: promiscuous mode enabled
em0: promiscuous mode disabled
em0: promiscuous mode enabled
em0: promiscuous mode disabled
em0: promiscuous mode enabled
em0: promiscuous mode disabled
--Apple-Mail=_E43D5A19-1FB8-4DA3-AD2B-AF15B1B08D3C--
--Apple-Mail=_2CDDC20C-82C3-41DC-9607-42B13FA6F0F1--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B722D1A8-AA5F-4B80-8F84-B3935D72A498>