Date: Wed, 16 Apr 2003 22:22:39 -0500 (CDT) From: nbari@unixmexico.com To: ticso@cicely.de Cc: freebsd-hackers@freebsd.org Subject: Re: HP psc 750 on FreeBSD 4.8 Message-ID: <22400.148.243.211.1.1050549759.squirrel@mail.unixmexico.com> In-Reply-To: <20030416130030.GB529@cicely9.cicely.de> References: <1334.148.243.211.57.1050482163.squirrel@mail.unixmexico.com> <20030416130030.GB529@cicely9.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok, after installing usbutil.tgz. and using usbctl i get this: ------ USB device 1: 9 USB device 2: 0 USB device 3: 255 3 USB devices found DEVICE addr 1 DEVICE descriptor: bLength=18 bDescriptorType=device(1) bcdUSB=1.00 bDeviceClass=9 bDeviceSubClass=0 bDeviceProtocol=0 bMaxPacketSize=64 idVendor=0x0000 idProduct=0x0000 bcdDevice=100 iManufacturer=1(Intel) iProduct=2(UHCI root hub) iSerialNumber=0() bNumConfigurations=1 CONFIGURATION descriptor 0: bLength=9 bDescriptorType=config(2) wTotalLength=25 bNumInterface=1 bConfigurationValue=1 iConfiguration=0() bmAttributes=40 bMaxPower=0 mA INTERFACE descriptor 0: bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=0 bNumEndpoints=1 bInterfaceClass=9 bInterfaceSubClass=0 bInterfaceProtocol=0 iInterface=0() ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in bmAttributes=interrupt wMaxPacketSize=8 bInterval=255 current configuration 1 HUB descriptor: bDescLength=8 bDescriptorType=41 bNbrPorts=2 wHubCharacteristics=0a bPwrOn2PwrGood=50 bHubContrCurrent=0 DeviceRemovable=0 Hub status 0000 0000 Port 1 status=0103 change=0000 Port 2 status=0303 change=0000 ---------- DEVICE addr 2 DEVICE descriptor: bLength=18 bDescriptorType=device(1) bcdUSB=1.10 bDeviceClass=0 bDeviceSubClass=0 bDeviceProtocol=0 bMaxPacketSize=8 idVendor=0x03f0 idProduct=0x1411 bcdDevice=100 iManufacturer=1(Hewlett-Packard) iProduct=2(PSC 750) iSerialNumber=3(MY2B7D32Y4WB) bNumConfigurations=1 CONFIGURATION descriptor 0: bLength=9 bDescriptorType=config(2) wTotalLength=78 bNumInterface=1 bConfigurationValue=1 iConfiguration=0() bmAttributes=c0 bMaxPower=2 mA INTERFACE descriptor 0: bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=0 bNumEndpoints=3 bInterfaceClass=7 bInterfaceSubClass=1 bInterfaceProtocol=3 iInterface=0() ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-out bmAttributes=bulk wMaxPacketSize=64 bInterval=0 ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in bmAttributes=bulk wMaxPacketSize=64 bInterval=0 ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=2-in bmAttributes=interrupt wMaxPacketSize=8 bInterval=10 INTERFACE descriptor 1: bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=1 bNumEndpoints=2 bInterfaceClass=7 bInterfaceSubClass=1 bInterfaceProtocol=2 iInterface=0() ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-out bmAttributes=bulk wMaxPacketSize=64 bInterval=0 ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in bmAttributes=bulk wMaxPacketSize=64 bInterval=0 INTERFACE descriptor 2: bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=2 bNumEndpoints=1 bInterfaceClass=7 bInterfaceSubClass=1 bInterfaceProtocol=1 iInterface=0() ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-out bmAttributes=bulk wMaxPacketSize=64 bInterval=0 current configuration 1 ---------- DEVICE addr 3 DEVICE descriptor: bLength=18 bDescriptorType=device(1) bcdUSB=1.00 bDeviceClass=255 bDeviceSubClass=0 bDeviceProtocol=0 bMaxPacketSize=8 idVendor=0x04d2 idProduct=0xff05 bcdDevice=0 iManufacturer=1() iProduct=2() iSerialNumber=0() bNumConfigurations=1 CONFIGURATION descriptor 0: bLength=9 bDescriptorType=config(2) wTotalLength=25 bNumInterface=1 bConfigurationValue=1 iConfiguration=0() bmAttributes=40 bMaxPower=0 mA INTERFACE descriptor 0: bLength=9 bDescriptorType=interface(4) bInterfaceNumber=0 bAlternateSetting=0 bNumEndpoints=1 bInterfaceClass=1 bInterfaceSubClass=1 bInterfaceProtocol=0 iInterface=0() ENDPOINT descriptor: bLength=7 bDescriptorType=endpoint(5) bEndpointAddress=1-in bmAttributes=interrupt wMaxPacketSize=2 bInterval=32 current configuration 1 ---------- > On Wed, Apr 16, 2003 at 03:36:03AM -0500, nbari@unixmexico.com wrote: >> Hi all, i have an HP psc 750 USB printer >> >> Any idea on how configure this printer to make it work on FreeBSD ? >> >> i have this lines on my kernel: >> >> device usb >> device uhci >> device ulpt >> device uscanner >> device ugen >> >> >> dmesg give me this: >> >> ugen0: Hewlett-Packard PSC 750, rev 1.10/1.00, addr 2 > > Can you please install http://www.cosmo-project.de/~bernd/usbutil.tgz > and mail the usbctl output. > >> usbdevs -v give me this: >> Controller /dev/usb0: >> addr 1: self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), >> rev >> 1.00 >> port 1 addr 2: power 2 mA, config 1, PSC 750(0x1411), >> Hewlett-Packard(0x03f0), rev 1.00 >> port 2 addr 3: low speed, self powered, config 1, ASC495 >> Speakers(0xff05), ALTEC LANSING Multimedia (0x04d2), rev 0.00 >> >> >> when trying to run an lptest > /dev/ulpt0 i get an : /dev/ulpt0: Device >> not configured. >> >> and when runing lptest > /dev/ugen0 nothing happens. > > ugen is a generic driver for raw device access. > > -- > B.Walter BWCT http://www.bwct.de > ticso@bwct.de info@bwct.de > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?22400.148.243.211.1.1050549759.squirrel>