From owner-freebsd-newbies@FreeBSD.ORG Sun Jan 2 16:31:49 2005 Return-Path: Delivered-To: freebsd-newbies@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 0245D16A4CE for ; Sun, 2 Jan 2005 16:31:49 +0000 (GMT) Received: from gawab.com (www.gawab.com [204.97.230.43]) by mx1.FreeBSD.org (Postfix) with SMTP id 65C9E43D2F for ; Sun, 2 Jan 2005 16:31:48 +0000 (GMT) (envelope-from jadukor@gawab.com) Received: (qmail 10359 invoked by uid 1004); 2 Jan 2005 16:30:14 -0000 Message-ID: <20050102163014.10356.qmail@gawab.com> Received: from 202.84.34.91 by gawab.com with HTTP; Sun, 02 Jan 2005 16:30:13 GMT From: "Emon" To: freebsd-newbies@freebsd.org Date: Sun, 02 Jan 2005 16:30:13 GMT Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Originating-IP: [202.84.34.91] Subject: kernel compiling prob X-BeenThere: freebsd-newbies@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Gathering place for new users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 02 Jan 2005 16:31:49 -0000 Hello every one I am a newbie, I am using FreeBSD 4.10 & I was trying to rebild a new kernel for my system(just trying). I followed the instructions on FreeBSD Hand-Book. ******************************* Procedure 1. Building a Kernel the ``Traditional'' Way Run config(8) to generate the kernel source code. # /usr/sbin/config MYKERNEL Change into the build directory. This is printed out after running the aforementioned command. # cd ../compile/MYKERNEL For FreeBSD version prior to 5.0, use instead: # cd ../../compile/MYKERNEL Compile the kernel. # make depend # make Install the new kernel. # make install Procedure 2. Building a Kernel the ``New'' Way Change to the /usr/src directory. # cd /usr/src Compile the kernel. # make buildkernel KERNCONF=MYKERNEL Install the new kernel. # make installkernel KERNCONF=MYKERNEL ********************************** I have tried both Procedure(2) & Procedure(1). But in Procedure(1) it stops after # make depend & in Procedure(2) it stops after # make buildkernel KERNCONF=KERNEL01 I don't know what other information I should give or how, so I am just psating the last few lines before it stops compiling & my KERNEL01 configuration file. *************************************** cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -I../../contrib/dev/acpica -I../../contrib/ipfilter -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2 setdef1.c touch hack.c cc -shared -nostdlib hack.c -o hack.So rm -f hack.c sh ../../conf/newvers.sh KERNEL01 cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I- -I. -I../.. -I../../../include -I../../contrib/dev/acpica -I../../contrib/ipfilter -D_KERNEL -include opt_global.h -mpreferred-stack-boundary=2 vers.c linking kernel umass.o: In function `umass_cam_attach_sim': umass.o(.text+0x1637): undefined reference to `cam_simq_alloc' umass.o(.text+0x165d): undefined reference to `cam_sim_alloc' umass.o(.text+0x1676): undefined reference to `xpt_bus_register' umass.o(.text+0x1686): undefined reference to `cam_simq_free' umass.o: In function `umass_cam_rescan_callback': umass.o(.text+0x169f): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_rescan': umass.o(.text+0x16ef): undefined reference to `xpt_periph' umass.o(.text+0x16f8): undefined reference to `xpt_create_path' umass.o(.text+0x170b): undefined reference to `xpt_setup_ccb' umass.o(.text+0x1726): undefined reference to `xpt_action' umass.o: In function `umass_cam_detach_sim': umass.o(.text+0x17df): undefined reference to `xpt_bus_deregister' umass.o(.text+0x17fd): undefined reference to `cam_sim_free' umass.o: In function `umass_cam_detach': umass.o(.text+0x183e): undefined reference to `xpt_create_path' umass.o(.text+0x185f): undefined reference to `xpt_async' umass.o(.text+0x1867): undefined reference to `xpt_free_path' umass.o: In function `umass_cam_action': umass.o(.text+0x1beb): undefined reference to `xpt_done' umass.o(.text+0x1bfd): undefined reference to `xpt_done' umass.o: In function `umass_cam_cb': umass.o(.text+0x1d19): undefined reference to `xpt_done' umass.o: In function `umass_cam_sense_cb': umass.o(.text+0x1e20): undefined reference to `xpt_done' umass.o(.text+0x1e31): undefined reference to `xpt_done' umass.o(.text+0x1e4b): more undefined references to `xpt_done' follow *** Error code 1 Stop in /usr/src/sys/compile/KERNEL01. # *************************************************** ************************************************************** # # KERNEL01 -- kernel configuration file for FreeBSD/i386 # machine i386 cpu I686_CPU ident KERNEL01 maxusers 7 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options UFS_DIRHASH #Improve performance on big directories options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 #device fd1 at fdc0 drive 1 # # If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy, # don't use the above line for fdc0 but the following one: #device fdc0 # ATA and ATAPI devices #device ata0 at isa? port IO_WD1 irq 14 #device ata1 at isa? port IO_WD2 irq 15 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT/Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets) #options SYM_SETUP_LP_PROBE_MAP=0x40 # Allow ncr to attach legacy NCR devices when # both sym and ncr are configured #device adv0 at isa? #device adw #device bt0 at isa? #device aha0 at isa? #device aic0 at isa? #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device dpt # DPT Smartcache - See LINT for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID #device ciss # Compaq SmartRAID 5* series #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware Escalade # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std #device agp # support several AGP chipsets # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x20 # Advanced Power Management # PCCARD (PCMCIA) support #device card #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? irq 7 device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 NICs #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') #device bge # Broadcom BCM570x (``Tigon III'') # ISA Ethernet NICs. # 'device ed' requires 'device miibus' #device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 #device ex #device ep #device fe0 at isa? disable port 0x300 # Xircom Ethernet #device xe # PRISM I IEEE 802.11b wireless NIC. #device awi # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attachment needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those parameters here. #device an # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000 #device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? disable port 0x280 irq 10 drq 0 #device cs0 at isa? disable port 0x300 #device sn0 at isa? disable port 0x300 irq 10 # Pseudo devices - the number indicates how many units to allocate. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device md # Memory "disks" pseudo-device gif # IPv6 and IPv4 tunneling pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners device urio # Diamond Rio MP3 Player # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) ****************************************************** Thanks in advance Jadukor --------------------------------------------- Free POP3 Email from www.Gawab.com Sign up NOW and get your account @gawab.com!!