Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 24 Feb 2005 19:20:11 -0500
From:      Jed Clear <clear@alum.mit.edu>
To:        hselasky@c2i.net
Cc:        freebsd-usb@freebsd.org
Subject:   Re: Belkin PS/2 to USB converter, Not Pointing
Message-ID:  <421E6F3B.A59BA995@alum.mit.edu>
References:  <421D52BA.7090304@alum.mit.edu> <200502241304.34163.hselasky@c2i.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Hans Petter Selasky wrote:
> On Thursday 24 February 2005 05:06, Jed Clear wrote:
> > In preparation for adding new box[1] to my stable[2] that uses USB for
> > keyboard and mouse, I got a Belkin F5U119-E PS/2 to USB adapter for my PS/2
> > keyboard and old Trackman Marble FX.  Since there will be a new USB KVM, I
> > decided to try the adapter out with my FreeBSD 4.11-R server.  I managed to
> > get the keyboard to work through the adapter, but not the Trackman.  I
> > tried a grungy old Intellimouse in the adapter too, but no joy.  A real USB
> > mouse, off my laptop, works just fine.
> >
> > When I attach the adapter cable, I get this on the console/dmesg
> >     ukbd0: vendor 0x0d3d USBPS2, rev 1.10/0.01, addr 2, iclass 3/1
> >     kbd0 at ukbd0
> >     ums0: vendor 0x0d3d USBPS2, rev 1.10/0.01, addr 2, iclass 3/1
> >     ums0: 5 buttons and Z dir.
> 
> What USB controller are you using?

uhci0: <Intel 82371AB/EB (PIIX4) USB controller>
Complete dmesg output for the AX5 follows.  

Thanks,

-Jed
-----------------------------------------------------------------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights
reserved.
FreeBSD 4.11-RELEASE #3: Fri Feb 18 19:31:22 EST 2005
    root@fbsdk6:/usr/obj/usr/src/sys/K6
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD-K6tm w/ multimedia extensions (233.86-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x561  Stepping = 1
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
  AMD Features=0x400<<b10>>
real memory  = 67108864 (65536K bytes)
avail memory = 61227008 (59792K bytes)
Preloaded elf kernel "kernel" at 0xc040a000.
md0: Malloc disk
Using $PIR table, 6 entries at 0xc00fddf0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0
atapci0: ATA channel disabled by BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x6400-0x641f irq
15 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <Matrox MGA Millennium II 2164W graphics accelerator> at 9.0 irq
15
rl0: <RealTek 8139 10/100BaseTX> port 0x6800-0x68ff mem
0xe3000000-0xe30000ff irq 10 at device 11.0 on pci0
rl0: Ethernet address: 00:50:ba:42:b7:7b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x6c00-0x6cff mem
0xe3001000-0xe3001fff irq 11 at device 13.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0x7000-0x70ff mem
0xe3002000-0xe3002fff irq 14 at device 15.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
isa0: too many dependant configs (8)
isa0: unexpected small tag 14
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc9fff,0xcc000-0xd07ff,0xd1000-0xd17ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sbc0: <Creative SB AWE64> at port 0x220-0x22f,0x330-0x331,0x388-0x38b
irq 5 drq 1,5 on isa0
pcm0: <SB16 DSP 4.16> on sbc0
pcic0: <Vadem 469> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
Waiting 5 seconds for SCSI devices to settle
da2 at ahc0 bus 0 target 2 lun 0
da2: <MAXTOR COBRA_72_WLS BZ30> Fixed Direct Access SCSI-3 device
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da2: 68500MB (140288213 512 byte sectors: 255H 63S/T 8732C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <QUANTUM VIKING II 4.5WLS 3506> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 4350MB (8910423 512 byte sectors: 255H 63S/T 554C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34501W 0017> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C)
Mounting root from ufs:/dev/da0s3a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <RICOH MP6200S 2.20> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ukbd0: vendor 0x0d3d USBPS2, rev 1.10/0.01, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: vendor 0x0d3d USBPS2, rev 1.10/0.01, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?421E6F3B.A59BA995>