Date: Wed, 13 May 1998 11:22:35 -0700 From: "Jon P. deOng" <jdeong@cnminc.com> To: OLK <delise@online-club.de>, AIC7xxx@FreeBSD.ORG Subject: Re: wierd patching experience Message-ID: <3.0.32.19980513112231.00be78d0@pop.cnminc.com>
next in thread | raw e-mail | index | archive | help
i had almost the exact same results with any 2.1 kernel. I can get 2.1.anything on all the PII 233mhz machines we run. However, I tried 2.1.x with my 400mhz PII with the 100mhz bus and it hangs at >scsi : 1 host. >(scsi1:0:-1:-1) Scanning channel for devices. >(scsi0:-1:-1:-1) Allocating initial 30 SCB structures pressing <Ctrl>+<scrollLock> shows the swapper task in hung. I have posted a couple of messages to the linux kernel list but have had very little response. So if you find a fix for this I'd appreciate hearing about it. jpd At 04:04 PM 5/13/98 +0200, OLK wrote: >Here's the story: > >Dnl'ded linux-tarball 2.1.95 which ran not bad. >Patched one by one up to .99 running stable too. >Was brave enough to patch for 100, scsi hang at boot >went upto 101 -> exactly the same result > >Here's the bootmsg: > >(scsi1) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 14/0 >(scsi1) Wide Channel, SCSI ID=7, 16/255 SCBs >(scsi1) BIOS enabled, IO Port 0xec00, IRQ 16 >(scsi1) IO Memory at 0xfebfb000, MMAP Memory at 0xc880a000 >(scsi1) Resetting channel >(scsi1) Downloading sequencer code... 413 instructions downloaded >scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.13/3.2.4 > <Adaptec AHA-294X Ultra SCSI host adapter> >scsi : 1 host. >(scsi1:0:-1:-1) Scanning channel for devices. >(scsi0:-1:-1:-1) Allocating initial 30 SCB structures >(scsi0: 0: 0: 0) Invalid SCB during SEQINT 0x71, SCB_TAG 61. >(scsi0:-1:-1:-1) CMDCMPLT with invalid SCB index 61 > >booting with 2.1.100 and 2.1.101 >(486 and pentium both with AHA-2940 BIOS v1.16 PCI/NARROW-BUS) > >pls. ignore (scsi1/0) in the beginning, because its shamelessly >stolen by somebody who had exactly the same problem like me ;-(( > >Well, >then looked up the src and found in > ftp://ftp.dialnet.net/pub/linux/aic7xxx/ >the patch 5.0.14, glancing through krnl-src (101) >i had 5.0.13, aplying this went almost fine >except of a reject of 3 Hunks #(2,4,51) in aic7xxx.c, >which were already there in the krnl-src. >So 101 contains already 3 Hunks of 5.0.14 and reports >aic7xxx as 5.0.13...Huh? > >However, Result -> kernel 101 hangs at boot again at same >place with same see above error msgs. > >There seemes to be very little traffic here, >is this normal? > >OLK (who wants to use the 101 kernel) >-- >eMail : delise@online-club.de > > >To Unsubscribe: send mail to majordomo@FreeBSD.org >with "unsubscribe aic7xxx" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19980513112231.00be78d0>