Date: Thu, 18 Apr 2002 07:32:49 -0700 From: rob <rob@pythonemproject.com> To: Paul Schenkeveld <paul@psconsult.nl> Cc: Nick Tonkin <nick@rlnt.net>, freebsd-mobile@FreeBSD.ORG Subject: Re: CD/CD-RW drive not working on Dell Inspiron 7500 Message-ID: <3CBED911.C4FD4FF3@pythonemproject.com> References: <Pine.BSF.4.21.0110171515130.77938-100000@world.tonkinresolutions.com> <20020418135020.A66864@psconsult.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
Paul Schenkeveld wrote: > > Hi Nick, FreeBSD community, > > I just got a Dell Inspiron showing the same error messages under > FreeBSD 4.5 pl3. Since I saw no followup with a solution I was > wondering whether you got the CD/RW to work (ie. to write writable > and rewritable media). > > I can mount and read CDs and a CDRW written on a Yamaha SCSI burner > but 'burncd msinfo' and 'burncd blank' already give errors. From > my kernel config: > > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > #evice atapifd # ATAPI floppy drives > #evice atapist # ATAPI tape drives > > >From /var/log/messages: > > Apr 18 11:35:41 i4100 /kernel: acd0: CD-RW <HL-DT-ST CD-RW GCE-8080N> at ata1-master using PIO4 > Apr 18 13:30:37 i4100 /kernel: acd0: READ_BIG - MEDIUM ERROR asc=02 ascq=00 error=00 > Apr 18 13:31:34 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00 > Apr 18 13:31:44 i4100 /kernel: acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=24 ascq=00 error=00 > Apr 18 13:33:43 i4100 /kernel: acd0: BLANK_CMD - ILLEGAL REQUEST asc=64 ascq=00 error=00 > > Bye, > > Paul Schenkeveld > > On Wed, Oct 17, 2001 at 03:17:22PM -0700, Nick Tonkin wrote: > > > > Hello FreeBSD folks, > > > > I cannot get the CD-CD/RW drive to work under FreeBSD 4.4 on my Dell > > inspiron 7500. I know this has been brought up before but I could not > > find a solution. > > > > The CD drive is made by Matsushita I think, product number is UJDA310L > > > > Note that the behavior is different depending on whether or not there > > is a disk in tghe drive at boot. When I start the machine with a disk in > > it I get this: > > > > root@bomba ~>dmesg | grep -n acd0 > > 78:acd0: CDROM <UJDA310 Program Loader> at ata1-master using PIO2 > > 86:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 87:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 88:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 89:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 90:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > > ... and then: > > > > root@bomba ~>mount /cdrom > > cd9660: /dev/acd0c: Input/output error > > > > ... whereas if I start the machine without a disk in it, I get: > > > > root@bomba ~>grep -n acd0 ~nick/foo > > 78:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > 167:acd0: CD-RW <UJDA310> a4 ata1-master using PIO4 > > 256:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > 351:acd0: CD-RW <UJDA310> at ata1-master using PIO4 > > 358:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 359:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 360:acd0: READ_BIG - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > 361:acd0: PREVENT_ALLOW - ILLEGAL REQUEST asc=20 ascq=00 error=00 > > > > ... and then I can open the drive OK, insert a disk, close the drive > > manually (the drawer is not drawn in by the motor as with other CD-ROM > > drives I have used, or as with this one under windoze), and then I get: > > > > root@bomba ~>mount /cdrom > > cd9660: /dev/acd0c: Input/output error > > ... followed by the same series of errors. > > > > Any help greatly appreciated. > > > > root@bomba ~>uname -a > > FreeBSD bomba.rlnt.net 4.4-RELEASE FreeBSD 4.4-RELEASE #0: Wed Oct 17 > > 12:59:32 > > PDT 2001 root@bomba.rlnt.net:/usr/src/sys/compile/WITHSOUND i386 > > > > > > ~~~~~~~~~~~ > > Nick Tonkin > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message I don't know if this will help you, but I have sometimes gotten similar errors, and ejecting and re-inserting the media allowed me to use burncd. Rob. -- ----------------------------- The Numeric Python EM Project www.pythonemproject.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CBED911.C4FD4FF3>