Date: Tue, 5 Apr 2005 08:30:57 -0400 From: Rob Dosogne <admin@truthsolo.net> To: Nuno Dias <ndias@lip.pt> Cc: freebsd-alpha@freebsd.org Subject: Re: fatal kernel trap Message-ID: <7a669fb89842632b3d863a1c238307d4@truthsolo.net> In-Reply-To: <1112111034.28113.47.camel@lnsys06.lip.pt> References: <1112088137.28113.8.camel@lnsys06.lip.pt> <20050329093213.GE28703@cicely12.cicely.de> <1112107652.28113.34.camel@lnsys06.lip.pt> <20050329150044.GE33677@cicely12.cicely.de> <1112111034.28113.47.camel@lnsys06.lip.pt>
next in thread | previous in thread | raw e-mail | index | archive | help
I have been receiving the same crash & halt code on my 600au with the=20 same QLogic SCSI card during installer boot. I will have to try it in=20= a 64-bit PCI slot. I've been searching for the solution to this=20 problem since late last year! Does anyone know why we are getting a crash from SCSI in 32-bit? It=20 would be interesting to find out. cheers, Rob Dosogne, your friendly neighborhood sysadmin. http://www.truthsolo.net/ ---- A university is what a college becomes when the faculty loses interest=20= in students. -- John Ciardi On Mar 29, 2005, at 10:43, Nuno Dias wrote: > On Tue, 2005-03-29 at 17:00 +0200, Bernd Walter wrote: >> On Tue, Mar 29, 2005 at 03:47:32PM +0100, Nuno Dias wrote: >>> Very strange things ... >>> Today i do not have this error any more ... >>> >>> I see other thread (5.4b1 on Miata Jos=E9M.Fandi=F1o) trying to = install >>> FreeBSD in Miata too. >> >> He has a MiataGL machine - with Cyrpress ata chip. >> I asume you have a machine with CMD ata chip? > > Yes, i have a CMD ata chip. > >>> In my Miata machine, i can install FreeBSD 5.3-RELEASE or 5.4-BETA >>> snapshot with IDE Disk, but after that, when i try to boot the=20 >>> machine, >>> i get a kernel crash. >> >> The panic you already showed? >> It's triggered by the floppy controller. >> I don't know if the install kernel contains floppy support on alpha. >> Or do you see the same problem as Jos=E9M.Fandi=F1o? > > No, that panic that i show early, is from install, and i do not have > that crash anymore. > > The crash that i have reported now is from boot, after the install ... > This is the crash (IDE Disk)... > ------------------ > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Entering /boot/kernel/kernel at 0xfffffc0000345b60... > > halted CPU 0 > > halt code =3D 2 > kernel stack not valid halt > PC =3D 200000000 > ------------------ > > And yes, i see the same problem as Jos=E9M.Fandi=F1o when i try to = install > and the scsi card is in 32 bits slot pci. > >> >>> Then i change my approach to a SCSI DISK. >>> >>> I discovery that the scsi card only work in 64 bits slot pci, if i=20= >>> put >>> the card in 32 bits slot pci the install crash. >> >> Can you deliver boot messages from detecting the SCSI card in >> different slots? >> AFAIK the 32 bit slots on Miate are behind a PCI-PCI bridge. > > 64 bit slot > > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem > 0x800580000isp0: interrupting at CIA irq 4 > isp0: [GIANT-LOCKED] > ... > Waiting 15 seconds for SCSI devices to settle > da0 at isp0 bus 0 target 0 lun 0 > da0: <DEC RZ1CC-BA (C) DEC 883F> Fixed Direct Access SCSI-2 device > da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged = Queueing > Enabled > da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) > > 32 bit slot > > isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x8000-0x80ff mem > 0x800100001isp0: interrupting at CIA irq 16 > isp0: [GIANT-LOCKED] > > halted CPU 0 > > halt code =3D 5 > HALT instruction executed > PC =3D 1f00 >>>> > > ND > >> >>> After that (scsi card in 64 bits slot pci), FreeBSD 5.3-RELEASE or=20= >>> 5.4- >>> BETA snapshot work very well. >>> >>> Any suggest about the IDE problem ? >>> >>> Thank's for the help :) >>> ND >>> >>> On Tue, 2005-03-29 at 11:32 +0200, Bernd Walter wrote: >>>> On Tue, Mar 29, 2005 at 10:22:17AM +0100, Nuno Dias wrote: >>>>> Hi, >>>>> >>>>> I have a Digital Personal Workstation 433au, and i'm trying to=20 >>>>> install >>>>> FreeBSD 5.3-RELEASE, but the install crash with this message ... >>>>> >>>>> md0: Preloaded image </mfsroot> 4423680 bytes at = 0xfffffc00009ba570 >>>>> ad0: 9768MB <ST310232A/3.09> [19846/16/63] at ata0-slave WDMA2 >>>>> >>>>> fatal kernel trap: >>>>> >>>>> trap entry =3D 0x2 (memory management fault) >>>>> cpuid =3D 0 >>>>> faulting va =3D 0x0 >>>>> type =3D access violation >>>>> cause =3D store instruction >>>>> pc =3D 0xfffffc00006fa244 >>>>> ra =3D 0xfffffc0000716144 >>>>> sp =3D 0xfffffe000891fb50 >>>>> curthread =3D 0xfffffc000bb350e0 >>>>> pid =3D 7, comm =3D fdc0 >>>>> >>>>> panic: trap >>>>> cpuid =3D 0 >>>>> Uptime: 3s >>>>> >>>>> I tested with IDE disk, SCSI DISK, install from diskete, from=20 >>>>> CDROM, >>>>> and every time the same crash. >>>>> >>>>> Can someone tell me where is the problem ? >>>> >>>> Can you please verify with a 5.4-BETA snapshot? >> > --=20 > Nuno Dias <ndias@lip.pt> > LIP > > _______________________________________________ > freebsd-alpha@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-alpha > To unsubscribe, send any mail to=20 > "freebsd-alpha-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7a669fb89842632b3d863a1c238307d4>