Date: Thu, 24 Apr 1997 20:56:18 +0900 From: Takeshi Yamada <ken@tyd1.tydfam.iijnet.or.jp> To: freebsd-smp@FreeBSD.org Subject: Success Report Message-ID: <199704241156.UAA14270@tyd1.tydfam.iijnet.or.jp>
next in thread | raw e-mail | index | archive | help
Hi!
I darely not repeat the Hardware List as it is already reported,
ASUS P/I-P65UP5 & C-P6ND.
It works!! It has been working for 3 days without any trouble.
I thank you all your great job.
Followings are what I have with recent mptable (mptable -verbose -dmesg).
===============================================================================
MPTable, version 2.0.7
looking for EBDA pointer @ 0x040e, NOT found
searching CMOS 'top of mem' @ 0x0009fc00 (639K)
searching BIOS @ 0x000f0000
MP FPS found in BIOS @ physical addr: 0x000f60b0
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f60b0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0x8b
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f5caa
signature: 'PCMP'
base table length: 252
version: 1.4
checksum: 0x8c
OEM ID: 'OEM00000'
Product ID: 'PROD00000000'
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 23
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
1 0x11 BSP, usable 6 1 7 0xfbff
0 0x11 AP, usable 6 1 7 0xfbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 ISA
--
I/O APICs: APIC ID Version State Address
2 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT#
ExtINT conforms conforms 2 0 2 0
INT conforms conforms 2 1 2 1
INT conforms conforms 2 0 2 2
INT conforms conforms 2 3 2 3
INT conforms conforms 2 4 2 4
INT conforms conforms 2 5 2 5
INT conforms conforms 2 6 2 6
INT conforms conforms 2 7 2 7
INT conforms conforms 2 8 2 8
INT conforms conforms 2 9 2 9
INT conforms conforms 2 14 2 14
INT active-lo level 0 9:A 2 19
INT active-lo level 0 10:A 2 18
INT active-lo level 1 4:A 2 16
INT active-lo level 1 5:A 2 17
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID INT#
ExtINT active-hi edge 2 0 255 0
NMI active-hi edge 2 0 255 1
-------------------------------------------------------------------------------
# SMP kernel config file options:
options SMP # Symmetric MultiProcessor Kernel
# Recommended:
options APIC_IO # Symmetric (APIC) I/O
options SMP_INVLTLB # both APIC_IO/SMP_INVLTBL required
# Optional (built-in defaults will work in most cases):
options NCPU=2 # number of CPUs
options NBUS=3 # number of busses
options NAPIC=1 # number of IO APICs
options NINTR=24 # number of INTs
# Currently broken:
#options SMP_PRIVPAGES # BROKEN, DO NOT use!
#options SMP_AUTOSTART # BROKEN, DO NOT use!
# Rogue hardware:
#
# Tyan Tomcat II:
#options SMP_TIMER_NC #
#
# SuperMicro P6DNE:
#options SMP_TIMER_NC #
-------------------------------------------------------------------------------
dmesg output:
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-SMP #0: Thu Apr 24 20:33:40 JST 1997
ken@tyd0.tydfam.iijnet.or.jp:/usr/src/sys-MP/compile/SMPTYD
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011
cpu1 (AP): apic id: 0, version: 0x00040011
io0 (APIC): apic id: 2, version: 0x00170011
CPU: Pentium Pro (686-class CPU)
Origin = "GenuineIntel" Id = 0x617 Stepping=7
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
Physical memory hole(s):
avail memory = 63750144 (62256K bytes)
bdevsw_add_generic: adding D_DISK flag for device 15
Probing for devices on PCI bus 0:
chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:1:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:1:1
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 1 int a irq 19 on pci0:9:0
Freeing (NOT implimented) irq 15 for ISA cards.
fxp0: Ethernet address 00:a0:c9:04:9a:61
de0 <Digital 21140A Fast Ethernet> rev 32 int a irq 18 on pci0:10:0
Freeing (NOT implimented) irq 12 for ISA cards.
de0: 21140A [10-100Mb/s] pass 2.0
de0: address 00:40:05:31:4c:15
de0: enabling 100baseTX port
chip3 <DEC 21050 PCI-PCI bridge> rev 2 on pci0:12:0
Probing for devices on PCI bus 1:
ahc0 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 16 on pci1:4:0
Freeing (NOT implimented) irq 11 for ISA cards.
ahc0: aic7880 Channel A, SCSI Id=7, 16/255 SCBs
ahc0: waiting for scsi devices to settle
scbus0 at ahc0 bus 0
ahc0: target 0 Tagged Queuing Device
sd0 at scbus0 target 0 lun 0
sd0: <SEAGATE ST32155N 0532> type 0 fixed SCSI 2
sd0: Direct-Access 2049MB (4197405 512 byte sectors)
sd0: with 4177 cyls, 8 heads, and an average 125 sectors/track
ahc0: target 5 Tagged Queuing Device
sd1 at scbus0 target 5 lun 0
sd1: <SEAGATE ST32155N 0532> type 0 fixed SCSI 2
sd1: Direct-Access 2049MB (4197405 512 byte sectors)
sd1: with 4177 cyls, 8 heads, and an average 125 sectors/track
ahc1 <Adaptec 3940 Ultra SCSI host adapter> rev 0 int a irq 17 on pci1:5:0
Freeing (NOT implimented) irq 10 for ISA cards.
ahc1: aic7880 Channel B, SCSI Id=7, 16/255 SCBs
ahc1: waiting for scsi devices to settle
scbus1 at ahc1 bus 0
ahc1: target 0 Tagged Queuing Device
sd2 at scbus1 target 0 lun 0
sd2: <SEAGATE ST32155N 0532> type 0 fixed SCSI 2
sd2: Direct-Access 2049MB (4197405 512 byte sectors)
sd2: with 4177 cyls, 8 heads, and an average 125 sectors/track
ahc1: target 1 Tagged Queuing Device
sd3 at scbus1 target 1 lun 0
sd3: <SEAGATE ST32155N 0532> type 0 fixed SCSI 2
sd3: Direct-Access 2049MB (4197405 512 byte sectors)
sd3: with 4177 cyls, 8 heads, and an average 125 sectors/track
st0 at scbus1 target 3 lun 0
st0: <HP HP35480A T503> type 1 removable SCSI 2
st0: Sequential-Access density code 0x13, drive empty
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
lpt0 at 0x378-0x37f irq 9 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
sio0 at 0x3f8-0x3ff irq 4 on isa
sio1 at 0x2f8-0x2ff irq 3 on isa
sio2 not found at 0x3e8
sio3 not found at 0x2e8
pca0 on motherboard
pca0: PC speaker audio driver
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 on motherboard
npx0: INT 16 interface
sctarg0 at scbus255 target 255 lun 255
sctarg0: <unknown unknown ????> type 0 fixed SCSI 0
sctarg0: Processor Target
Enabled INTs: 1, 2, 3, 4, 6, 8, 9, 16, 17, 18, 19, imen: 0x00f0fca1
ccd0-3: Concatenated disk drivers
SMP: All idle procs online.
SMP: Starting 1st AP!
SMP: AP CPU #1 LAUNCHED!! Starting Scheduling...
SMP: TADA! CPU #1 made it into the scheduler!.
SMP: All 2 CPU's are online!
===============================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199704241156.UAA14270>