Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 11 Aug 2009 14:44:40 +0300
From:      Krassimir Slavchev <krassi@bulinfo.net>
To:        Nathan Le Nevez <nathan@lenevez.net.au>
Cc:        "freebsd-performance@freebsd.org" <freebsd-performance@freebsd.org>
Subject:   Re: Very slow I/O performance on HP BL465c
Message-ID:  <4A8159A8.3030206@bulinfo.net>
In-Reply-To: <C6A6F02B.5D66%nathan@lenevez.net.au>
References:  <C6A6F02B.5D66%nathan@lenevez.net.au>

next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

What is the output of 'vmstat -i' and 'camcontrol tags da0' ?
I have a ML350 running 7-STABLE with same controller and disks and
performance is almost same as your good server.

Nathan Le Nevez wrote:
> Hi,
> 
> I'm running 7.2-p3 on 2x HP BL465c blade servers, one of which performs very
> poorly. Both have the same RAID controller and 2 x 146GB 10k SAS disks
> configured in RAID-1. Both controllers have write-cache enabled. Both
> servers are running the same BIOS and firmware versions. Neither servers are
> running any services other than sshd.
> 
> Blade with good performance (2 x Opteron 2218, 8GB RAM):
> 
> ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
> 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on pci80
> ciss0: [ITHREAD]
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 1  VOLUMES MOPK:>  AFPi xCePdU  D#i2r Leacuntc hAcecde!s
> s SCSI-5 device
> da0: 135.168MB/s transfers
> dSaM0P::  CAoP CPU #3 Launched!
> mmand Queueing Enabled
> da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
> 
> Blade with bad performance (2 x Opteron 2352, 16GB RAM):
> 
> ciss0: <HP Smart Array E200i> port 0x4000-0x40ff mem
> 0xfdf80000-0xfdffffff,0xfdf70000-0xfdf77fff irq 19 at device 8.0 on pci80
> ciss0: [ITHREAD]
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 1  VOLUME OK> Fixed Direct Access SCSI-5 device
> da0: 135.168MB/s transfers
> da0: Command Queueing Enabled
> da0: 139979MB (286677120 512 byte sectors: 255H 32S/T 35132C)
> 
> # dbench -t 10  1              2              3             4
> blade1          183.456 MB/sec 236.86 MB/sec  299.28 MB/sec  192.675 MB/sec
> blade2          6.97931 MB/sec 9.42293 MB/sec 10.2482 MB/sec 12.407 MB/sec
> 
> Any help/ideas would be greatly appreciated. I have run through all the
> Insight diagnostics tools and it fails to find anything wrong with the slow
> server.
> 
> Cheers,
> Nathan 
> 
> _______________________________________________
> freebsd-performance@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-performance
> To unsubscribe, send any mail to "freebsd-performance-unsubscribe@freebsd.org"
> 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)

iD8DBQFKgVmoxJBWvpalMpkRAvilAJsGF0J34SgD34EcBxX8Ic8Hq6OUBACghpBL
C7YgX2qmvgb7WSvgFhDrKl8=
=JDJx
-----END PGP SIGNATURE-----



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A8159A8.3030206>