Date: Sat, 28 Feb 2015 10:04:40 +1100 From: Trevor Roydhouse <trev@sentry.org> To: beastie@nawi.is Cc: freebsd-arm@freebsd.org Subject: Re: FreeBSD 10.1 / 11 on a Raspberry Pi B+ / 2 ? Message-ID: <54F0F808.8030406@sentry.org> In-Reply-To: <b512debfc49e6e68ac725d0b03570f84.squirrel@ikornapostur.1984.is> References: <b512debfc49e6e68ac725d0b03570f84.squirrel@ikornapostur.1984.is>
next in thread | previous in thread | raw e-mail | index | archive | help
beastie@nawi.is wrote: > At the moment I have ordered a version B+ and be interested whether X also > could be configured using the above listed images (the link on the info > page refers to another image) ? The FreeBSD-10.1-STABLE-arm-armv6-RPI-B-20150217-r278906.img boots the B+ but does not enable power to the USB (and therefore) LAN ports. No HDMI video output unless forcing it with an entry in config.txt. The FreeBSD-11.0-CURRENT-arm-armv6-RPI-B-20150217-r278908.img boots the B+ and mostly works except for: 1) The files rpi.dts (r276161) and bcm2835.dtsi (r278915) have not yet been updated for the Raspberry Pi Model B+ GPIO pin mappings which are different to the A and B models. 2) My EDUP "nano" wireless dongle (urtwn0 - Realtek RTL8188CUS) can receive at 220KB/s with no issues, but when transmitting more than a few KB nonstop it dies and needs restarting. -- Trevor Roydhouse BJuris, LLB, LLM (UNSW) Systems Developer Australasian Legal Information Institute Web : www.austlii.edu.au
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54F0F808.8030406>