Date: Thu, 29 Jul 1999 09:27:16 +0200 (SAT) From: John Hay <jhay@mikom.csir.co.za> To: nick.hibma@jrc.it (Nick Hibma) Cc: current@FreeBSD.org Subject: Re: a little newbus problem Message-ID: <199907290727.JAA61038@zibbi.mikom.csir.co.za> In-Reply-To: <Pine.GSO.3.95q.990729092232.15855Q-100000@elect8> from Nick Hibma at "Jul 29, 1999 09:23:37 am"
next in thread | previous in thread | raw e-mail | index | archive | help
/usr/src/sys/i386/isa/if_ar.c /usr/src/sys/i386/isa/if_sr.c John > > Any source we can have a look at (probe/attach/*_MODULE)? > > Nick > > On Wed, 28 Jul 1999, John Hay wrote: > > > Nope, it is an ISA driver and I wasn't that brave. :-) It is part of > > standard FreeBSD and I just compiled it into the kernel with a kernel > > config file. > > > > > Are you by any chance kldload'ing the module for testing? > > > > > > If so you should have: > > > > > > DEVMETHOD(bus_driver_added, bus_generic_driver_added), > > > > > > For your 'arc' device_method_t method declaration. > > > > > > I got bit by this one too. > > > > > > On Wed, 28 Jul 1999, John Hay wrote: > > > > I have been trying to get my ar(4) and sr(4) drivers going again on -current, > > > > but it seems that the newbus code doesn't like my little trick that worked > > > > for so long. :-( > > > > > > > > Basically the drivers are called ar0 in the kernel config file, but in > > > > the isa_driver struct I call them arc and not ar, because the chip that > > > > is used actually have 2 ports and I register them seperately as ar0 and > > > > ar1 during the attach phase. > > > > > > > > >From what I can see now, it looks like the newbus code doesn't even > > > > call the arprobe routine. I have even added a printf right in the start > > > > of it, but it never prints anything. Just as a test I changed my kernel > > > > config file and files.i386 from ar to arc and then it works. > > > > > > > > So what should I do? Can the newbus code be fixed to work in this case > > > > too or should I newbusify the drivers and will that help? Won't that > > > > create a clash because of the isa compatabilty shim? > > > > > > > > John > > -- > > John Hay -- John.Hay@mikom.csir.co.za > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-current" in the body of the message > > > > > > -- > ISIS/STA, T.P.270, Joint Research Centre, 21020 Ispra, Italy > -- John Hay -- John.Hay@mikom.csir.co.za To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907290727.JAA61038>