Date: Wed, 5 May 1999 21:27:10 -0400 (EDT) From: lordportico@iname.com To: freebsd-stable@freebsd.org Subject: 3.1-stable/filesystem corruption/scsi error Message-ID: <990505212710B0.14213@weba2.iname.net>
next in thread | raw e-mail | index | archive | help
(also posted to comp.unix.bsd.freebsd.misc newsgroup and the freebsd-scsi mailing list)
hi all...
I keep getting these error messages:
(not together, but the "have seen data phase' error always is after either a data-in or data-out error)
blacktabby /kernel: (da0:ahc0:0:8:0): data overrun detected in Data-Out phase. Tag == 0x3a
blacktabby /kernel: (da0:ahc0:0:8:0) have seen Data Phase, Length=1024. NumSgs=1
blacktabby /kernel: (da0:ahc0:0:8:0): data overrun detected in Data-In phase. Tag == 0x7.
this results in serious filesystem corruption, because it doesn't finish
writing whatever file it is currently working on (as far as i can tell)
scsi id 8 is my primary hd (the ibm 4gig listed below)
my hardware:
FIC PA-2013mb (bios 1.33), p200mmx cpu, 64mb PC100 SDRAM, Adaptec
2940uw (bios 1.34.3), IBM 4gig uw-scsi hd, Old Micropolis 1.6gig scsi hd, NEC
Multispin 8x cdrom drive.
I wiped FreeBSD for a bit, and installed win98 on the 4gig hd, and it seemed
to work fine, so i think freebsd is the problem.
I'm running freebsd 3.1-stable, last make world about 2pm pacific time on 05-04-1999.
dmesg output:
(without the data-in error)
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-STABLE #0: Tue May 4 17:49:34 PDT 1999
root@blacktabby.dyndns.org:/usr/src/sys/compile/TERU
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (200.46-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping=3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62087168 (60632K bytes)
Preloaded elf kernel "kernel" at 0xc02eb000.
Probing for devices on PCI bus 0:
chip0: <VIA 82C597 (Apollo VP3) system controller> rev 0x04 on pci0.0.0
chip1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge> rev 0x00 on pci0.1.0
chip2: <VIA 82C586 PCI-ISA bridge> rev 0x47 on pci0.7.0
ide_pci0: <VIA 82C586x (Apollo) Bus-master IDE controller> rev 0x06 on pci0.7.1
chip3: <VIA 82C586B ACPI interface> rev 0x10 on pci0.7.3
vga0: <VGA-compatible display device> rev 0x01 int a irq 10 on pci0.8.0
ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x01 int a irq 11 on pci0.9.0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x08 int a irq 5 on pci0.10.0
fxp0: Ethernet address 00:90:27:44:ba:67
Probing for devices on PCI bus 1:
Probing for PnP devices:
CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x0924c1de Comp ID: PNPb02f [0x2fb0d041]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <8 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model GlidePoint, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
ppc0 at 0x378 irq 7 on isa
ppc0: Winbond chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.2
sb_reset_dsp failed
sb0 not found at 0x220
sb_reset_dsp failed
sbxvi0 not found
sbmidi0 not found at 0x330
opl0 not found at 0x388
awe0 at 0x620 on isa
AWE32: not detected
Intel Pentium detected, installing workaround for F00F bug
Waiting 10 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 3 lun 0
da1: <MICROP 1548-15MZ1077802 HZ2P> Fixed Direct Access SCSI-CCS device
da1: 3.300MB/s transfers
da1: 1635MB (3349512 512 byte sectors: 255H 63S/T 208C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <NEC CD-ROM DRIVE:462 1.13> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 8 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
cd9660: RockRidge Extension
(da0:ahc0:0:8:0): data overrun detected in Data-Out phase. Tag == 0x3.
(da0:ahc0:0:8:0): Have seen Data Phase. Length = 1024. NumSGs = 1.
any help would be greatly appreciated...
thanks
Ace
---------------------------------------------------
Get free personalized email at http://www.iname.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?990505212710B0.14213>