Date: Sun, 20 Jun 1999 01:38:33 -0500 From: "Brian's Mail" <bellefso@execpc.com> To: "Doug White" <dwhite@resnet.uoregon.edu> Cc: "FreeBSD Questions" <freebsd-questions@FreeBSD.ORG> Subject: RE: Performance Tuning Message-ID: <NCBBLDHPCJFJEDOEPEBFCEEICNAA.bellefso@execpc.com> In-Reply-To: <Pine.BSF.4.10.9906192232250.55539-100000@resnet.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
I have tried a few different cards. I have a C3 and C6.1 digital chipset, and the newer PNIC D1 and D2 revisions. I have gotten the same results with all the cards, within 100-200 K/sec anyways. I am going to replace the hub with a Intel switch and see what happens. I think the cards should be able to do better than 20 Mb/sec on a switch. Thanks, brian -----Original Message----- From: Doug White [mailto:dwhite@resnet.uoregon.edu] Sent: Sunday, June 20, 1999 12:35 AM To: Brian's Mail Cc: FreeBSD Questions Subject: Re: Performance Tuning On Sat, 19 Jun 1999, Brian's Mail wrote: > I would like to find some tips/info on tuning a server for web and ftp > performance. I currently have a machine with a PII 300, 256 MB RAM, a > Netgear FA310TX network card and an adaptec 2940 UW controller. I can only > get about 2500 K/sec over a 100 MB network. The machine is connected to a > Linksys 10/100 rackmount hub. I think that I should be able to do better > than this without a problem. If there are any links or other information I > would be extremely grateful. I don't know what the other guy has against Netgear cards (they're rev C3 Digitals, right?), but that LinkSys hub is killing you. Beyond being half-duplex, LinkSys equipment is sub-par performance-wise. Swap the hub with a Ethernet switch (like the HP ProCurve series) and watch the throughput fly. Doug White Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve http://gladstone.uoregon.edu/~dwhite | www.freebsd.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?NCBBLDHPCJFJEDOEPEBFCEEICNAA.bellefso>