Date: Fri, 8 Mar 2002 11:33:38 +1100 From: "Scott Penno" <scott.penno@gennex.com.au> To: "Scott Penno" <scott.penno@gennex.com.au>, <freebsd-mobile@freebsd.org> Subject: PC card memory allocation problems on Dell i2500 [was Problems] Message-ID: <003001c1c639$148b6600$0128a8c0@jupiter> References: <002301c1c637$95abf4e0$0128a8c0@jupiter>
next in thread | previous in thread | raw e-mail | index | archive | help
Sorry, a more desdriptive subject line should have been used. Problem
details below.
Scott.
----- Original Message -----
From: "Scott Penno" <scott.penno@gennex.com.au>
To: <freebsd-mobile@freebsd.org>
Sent: Friday, March 08, 2002 11:22 AM
Subject: Problems
> Hi there,
>
> I've recently upraded from my Toshiba Satellite to a Dell Inspiron 2500.
> After initial problems booting FreeBSD 4.5 on the i2500, I'm now at the
> point where I'd love to have either of my two network cards working. One
is
> a 3Com 3C589D and the other is a Xircom RBEM56G-100.
> When the rc.pccard is run upon booting, the following message appears:
> pccardc:
> ioctl (PIOCRWMEM)
> :
> Invalid argument
>
> When I run pccardc pccardmem <memadd> with any address larger than a 16
bit
> value, the same error is reported. Upon inserting either cards, I
received
> the following message:
> Mar 6 08:52:19 jupiter pccardd[39]: No card in database for
> "(null)"("(null)")
> Anyone seen this before or have any tips on what the problem is?
> Upon inserting the Xircom card I receive the following:
> pcic0: Card type 32-bit cardbus is unsupported
> Is the Xircom card (cardbus) supported under FreeBSD 4.5?
>
> Entire dmesg attached for reference.
>
> Regards,
>
> Scott.
>
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.5-RELEASE #2: Wed Mar 6 08:46:44 EST 2002
> root@jupiter.gennex.com.au:/usr/src/sys/compile/JUPITER
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (897.28-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x68a Stepping = 10
>
>
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
> PAT,PSE36,MMX,FXSR,SSE>
> real memory = 266797056 (260544K bytes)
> avail memory = 256188416 (250184K bytes)
> Preloaded elf kernel "kernel" at 0xc0360000.
> Pentium Pro MTRR support enabled
> Using $PIR table, 7 entries at 0xc00fdf50
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 10
> pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
> pci1: <PCI bus> on pcib1
> pcic0: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.0 on pci1
> pcic0: PCI Memory allocated: 0x44000000
> pcic0: Warning: O2micro OZ68xx chips may not work
> pccard0: <PC Card bus (classic)> on pcic0
> pcic1: <O2micro 6933 PCI-Cardbus Bridge> irq 9 at device 3.1 on pci1
> pcic1: PCI Memory allocated: 0x44001000
> pcic1: Warning: O2micro OZ68xx chips may not work
> pccard1: <PC Card bus (classic)> on pcic1
> isab0: <PCI to ISA bridge (vendor=8086 device=244c)> at device 31.0 on
pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1
on
> pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f
> irq 5 at device 31.2 on pci0
> usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
> uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1880-0x189f
> irq 5 at device 31.4 on pci0
> usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pcm0: <Intel 82801BA (ICH2)> port 0x1840-0x187f,0x1c00-0x1cff irq 5 at
> device 31.5 on pci0
> orm0: <Option ROMs> at iomem
0xc0000-0xcbfff,0xd0000-0xd3fff,0xd4000-0xd7fff
> on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ad0: 19077MB <HITACHI_DK23CA-20> [38760/16/63] at ata0-master UDMA100
> acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata1-master using PIO4
> Mounting root from ufs:/dev/ad0s2a
> pccard: card inserted, slot 0
> pccard: card removed, slot 0
> pcic0: Card type 32-bit cardbus is unsupported
> swapon: adding /dev/ad0s2b as swap device
> swapon: adding /dev/ad0s2e as swap device
> Automatic boot in progress...
> /dev/ad0s2a:
> FILESYSTEM CLEAN; SKIPPING CHECKS
> /dev/ad0s2a:
> clean, 4371441 free
> (13185 frags, 544782 blocks, 0.3% fragmentation)
> Setup PC-CARD:
> pccardc:
> ioctl (PIOCRWMEM)
> :
> Invalid argument
> beep
> pccardd
> .
> Doing initial network setup:
> hostname
> .
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
> inet 127.0.0.1 netmask 0xff000000
> Additional routing options:
> TCP keepalive=YES
> .
> Routing daemons:
> .
> Additional daemons:
> syslogd
> .
> Doing additional network setup:
> .
> Starting final network daemons:
> .
> ELF ldconfig path: /usr/lib /usr/lib/compat
> a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
> Starting standard daemons:
> inetd
> cron
> sshd
> .
> Initial rc.i386 initialization:
> .
> Configuring syscons:
> blanktime
> .
> Additional ABI support:
> .
> Local package initialization:
> .
> Additional TCP options:
> .
>
> Wed Mar 6 08:50:33 EST 2002
> Mar 6 08:50:49 jupiter login: ROOT LOGIN (root) ON ttyv1
> pcic0: Card type 32-bit cardbus is unsupported
> pccard: card inserted, slot 0
> Mar 6 08:52:19 jupiter pccardd[39]: No card in database for
> "(null)"("(null)")
> pccard: card removed, slot 0
>
>
>
>
>
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003001c1c639$148b6600$0128a8c0>