From owner-freebsd-questions Mon Jul 28 10:14:40 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id KAA18703 for questions-outgoing; Mon, 28 Jul 1997 10:14:40 -0700 (PDT) Received: from Rigel.orionsys.com (dbabler@rigel.orionsys.com [205.148.224.9]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id KAA18698 for ; Mon, 28 Jul 1997 10:14:37 -0700 (PDT) Received: from localhost (dbabler@localhost) by Rigel.orionsys.com (8.8.5/8.6.9) with SMTP id KAA07119; Mon, 28 Jul 1997 10:13:51 -0700 (PDT) Date: Mon, 28 Jul 1997 10:13:50 -0700 (PDT) From: Dave Babler To: Doug White cc: freebsd-questions@FreeBSD.ORG Subject: Re: Network/Routed Problem In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Sun, 27 Jul 1997, Doug White wrote: > On Sun, 27 Jul 1997, Dave Babler wrote: > > > What happens is this: the system suddenly cannot reach any host. Ping > > reports that my router (which is functioning perfectly) is down. After > > this point, rebooting the system does NOT fix the problem; the rc.network > > hangs on starting routed. It will eventually reboot correctly again, but > > it may take a dozen tries (including power-offs and reprogramming the NIC > > from DOS, neither of which seem to make any difference). I've only seen > > this problem since upgrading to 2.2 with then new driver (ie0) - I'm using > > an Intel EtherExpress 16, which used to be the ix0 driver. I'm running > > 2.2-STABLE. Between reboots of BSD, testing the NIC under DOS shows it to > > be completely functional. > > Unfortunately the support for the Intel EtherExpress series leaves much to > be desired. We had to abandon an EtherExpress16 on our 486 server due to > occaisional problems and traded it in for a totally flawless NE2000. > What problems did it have, Doug? I'm running this on a 486DX2-66 currently. Well, I suppose if I have to, I will... except that it worked flawlessly up until the driver was merged with the ix cards. On the plus side, I can now run trafshow and other network tools - on the down side, that apparently causes it to lock up in an unexplained way. Just *how* it can survive EEPROM reprogramming and powerdowns and then suddenly start working again is pure voodoo. -Dave