Date: Fri, 09 Feb 2001 19:21:13 -0500 From: Don Tyson <tyson@stanfordalumni.org> To: "Dominic Marks" <dominic_marks@hotmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: D-Link 530TX (AKA: VIA VT6102) Configuration Mess Message-ID: <200102100021.QAA16185@gull.prod.itd.earthlink.net> In-Reply-To: <F52djeZ7VYrGbbrHYZy00010d44@hotmail.com> References: <F52djeZ7VYrGbbrHYZy00010d44@hotmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Howdy! > > I'm trying to get my D-Link NIC to work under FreeBSD 4.2-stable. I'v > located the right driver and included it into my kernel and the device is > now detected in my dmesg. However it seems to have some problems: > > # dmesg | grep vr0 > vr0: VIA VT6102 at IRQ 10 at device 15.0 on Pci0 > vr0: couldn't map ports / memory > device_probe_and_attach: vr0 attached returned 6 Don't know how many different drivers will run the DFE-530TX+ but I use the miibus device with the rl device (see below): # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device pcn # AMD Am79C79x PCI 10/100 NICs device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II Do you have the miibus enabled? Compiled? My dmesg: rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xda000000-0xda0000ff irq 9 at device 11.0 on pci0 rl0: Ethernet address: 00:50:ba:8a:c1:9d miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 HTH Don Tyson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200102100021.QAA16185>