Date: Fri, 8 Feb 2002 20:39:28 +0100 From: Cliff Sarginson <cliff@raggedclown.net> To: questions@FreeBSD.org Subject: Re: ulpt and HP940c Message-ID: <20020208193928.GC1767@raggedclown.net> In-Reply-To: <20020208160226.GA5921@rhadamanth> References: <20020208160226.GA5921@rhadamanth>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Feb 08, 2002 at 04:02:26PM +0000, Ceri wrote: > > I've tried looking for other sources for this information, but there is no > manpage for ulpt or unlpt, and I can't find a howto. > > I've just acquired a HP940c printer, connected over a USB cable. > <snip> > uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 2 at device 7.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 2 at device 7.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered <snip> Do you have device ulpt in your kernel conf file ? I see no sign below of it you should see a line like: ulpt0: EPSON USB Printer, rev 1.00/1.00, addr 4, iclass 7/1 in dmesg. However it doesn't look as though it is finding any usb device (other than hubs and controllers). Even if it doesn't know about your printer I would have thought if it found it then you would see an entry for "ugen" (a generic usb catch-all for unknown usb devices from my understanding - I don't think you can actually do anything with such a device). Also you have to make sure it is in the source as a supported device. ...usbdevs... Would look for you but my kernel source tree seems to have disappeared .. lol.. (I think I have a typo in my cvsupfile..*sigh* I love this feature where if you give it a non-existant tag it wipes all the source code off the disk .. I knew I should have watched it instead of going to bed.) -- Regards Cliff To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020208193928.GC1767>