Date: Sat, 19 Jul 2003 17:31:36 +0000 From: dlyscas@att.net To: freebsd-questions@freebsd.org Subject: /dev/lpt0: Device busy Message-ID: <20030719173137.3E1F343FA3@mx1.FreeBSD.org>
next in thread | raw e-mail | index | archive | help
FreeBSD 4.8
HP LaserJet 3100 multi-function printer plugged into the parallel port.
Canon BJC 3000 plugged into a USB port.
For more info, a portion of "dmesg" output is pasted below.
I'm trying to set up FreeBSD for the first time and I am stuck at setting up
my printer.
When I type the command:
#lptest > /dev/lpt0
I get the response:
/dev/lpt0: Device busy.
Don't know what to do.
Thanks.
Output of "dmesg":
FreeBSD 4.8-RELEASE #0: Thu Apr 3 10:53:38 GMT 2003
root@freebsd-stable.
frequency 1193182 Hz
CPU: AMD Athlon(tm) XP 1700+ (1468.47-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662
Stepping = 2
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!
real memory = 536805376 (524224K bytes)config
avail memory = 517066752 (504948K bytes)
Preloaded elf kernel "kernel" at 0xc051d000
Preloaded userconfig_script "/boot/kernel.conf" at 0xc051d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdea0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0
on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 514c graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x1813, dev=0x4100) at 9.0 irq 11
pci0: <unknown card> (vendor=0x1813, dev=0x4100) at 9.1 irq 11
pci0: <unknown card> (vendor=0x1102, dev=0x0004) at 11.0 irq 5
pci0: <unknown card> (vendor=0x1102, dev=0x7003) at 11.1
pci0: <unknown card> (vendor=0x1102, dev=0x4001) at 11.2 irq 3
sis0: <NatSemi DP83815 10/100BaseTX> port 0xdc00-0xdcff mem 0xef105000-
0xef105fff irq 5 at device 15.0 on pci0
sis0: Ethernet address: 00:02:e3:24:9f:18
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=1106 device=3074)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8233 ATA100 controller> port 0xe000-0xe00f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 3 at device 17.2 on
pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ulpt0: Canon product 0x1051, rev 1.10/1.00, addr 2, iclass 7/1
uhub0: device problem, disabling port 2
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 3 at device 17.3 on
pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, r
v 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 3 at device 17.4 on
pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 3100> HP GDI
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata0-master UDMA100
ad1: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-slave UDMA100
acd0: CD-RW <24X10> at ata1-master PIO4
Mounting root from ufs:/dev/ad1s1a
fd0c: hard error writing fsbn 0 (No status)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030719173137.3E1F343FA3>