Date: Tue, 16 Apr 2002 12:44:24 -0500 From: Stephen Hilton <nospam@hiltonbsd.com> To: freebsd-stable@freebsd.org Cc: dvd@dtek.chalmers.se, lioux@freebsd.org, marcus@marcuscom.com Subject: DVD ogle problem on STABLE, DMA related ? Message-ID: <20020416124424.590f30e6.nospam@hiltonbsd.com>
next in thread | raw e-mail | index | archive | help
Greetings,
Having trouble getting Ogle to work on 4.5-STABLE cvsup'd on:
04-15-2002 10:01:43 CDT
#uname -a
FreeBSD xxxxxxx.xxxxx.xxx 4.5-STABLE FreeBSD 4.5-STABLE #0: Mon Apr 15 11:20:18 CDT 2002 root@xxxxxxx.xxxxx.xxx:/usr/obj/usr/src/sys/KERN_USB i386
Ogle worked very well on this system on 4.5-STABLE a while back,
then started having problems, unfortunatly I do not know exactly
when the problems started as I was too busy to watch any movies
for a while.
Ogle starts up for me and plays the "laser hitting disk intro
ok along with the audio "trumpets" ok" but then when loading the
next content the video and audio extremely chops (9+ seconds).
It will play around 2 seconds of video and audio, then pauses
for about 6-10 seconds, then 2 seconds of av, lather rinse repeat.
I was running Xfree 4.1 when ogle was working, problem started
while still using X4.1.
Wiped the partition and did a clean install from FreeBSD Services
DVD 4.5-RELEASE, then cvsup updated to 4.5-STABLE, did a basic
X and Gnome setup (now on X 4.2) all from ports, no packages.
Installed ogle from ports (portupgrade -Nivr graphics/ogle-gui),
but still have the same problem.
ASUS P3B-1394 MB
Toshiba DVD-ROM SD-R1002
Matrox Marvel (G400 with TV-tuner)
DMA status:
# sysctl -a | grep dma
hw.ata.ata_dma: 1
hw.ata.atapi_dma: 1
/var/run/dmesg.boot:
----------------------------------------------------
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Mon Apr 15 11:20:18 CDT 2002
root@xxxxxx.xxxx.xxx:/usr/obj/usr/src/sys/KERN_USB
Calibrating clock(s) ... TSC clock: 601344716 Hz, i8254 clock: 1193144 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 601365902 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268419072 (262128K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00382000 - 0x0fff3fff, 264708096 bytes (64626 pages)
config> q
fb: new array size 4
avail memory = 257646592 (251608K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9f00
bios32: Entry = 0xf06b0 (c00f06b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x8b0
pnpbios: Found PnP BIOS data at 0xc00fd330
pnpbios: Entry = f0000:d360 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
ACPI: 000f81d0
Preloaded elf kernel "kernel" at 0xc035b000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035b09c.
VESA: information block
56 45 53 41 00 02 ca 6c 00 c0 01 00 00 00 74 69
00 c0 00 01 05 01 df 6c 00 c0 e6 6c 00 c0 f2 6c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 11 mode(s) found
VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc00c6974 (c0006974)
VESA: Matrox Graphics Inc.
VESA: Matrox Matrox G400 00
Pentium Pro MTRR support enabled
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 7 entries at 0xc00f0ea0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d0000000, size 28
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000d800, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=3
map[20]: type 1, range 32, base 0000d400, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 0000e800, size 4
found-> vendor=0x12eb, dev=0x0002, revid=0xfe
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base cc000000, size 18
map[14]: type 1, range 32, base 0000d000, size 3
map[18]: type 1, range 32, base 0000b800, size 3
found-> vendor=0x10b7, dev=0x9200, revid=0x78
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base 0000b400, size 7
map[14]: type 1, range 32, base cb800000, size 7
found-> vendor=0x1000, dev=0x000c, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000b000, size 8
map[14]: type 1, range 32, base cb000000, size 8
map[18]: type 1, range 32, base ca800000, size 12
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x102b, dev=0x0525, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base ce000000, size 25
map[14]: type 1, range 32, base cd000000, size 14
map[18]: type 1, range 32, base cc800000, size 23
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 10
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xd808
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI ff ff
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 3 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uscanner0: EPSON EPSON Scanner, rev 1.10/3.02, addr 2
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x12eb, dev=0x0002) at 5.0 irq 3
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb400-0xb47f mem 0xcb800000-0xcb80007f irq 3 at device 9.0 on pci0
using shared irq3.
xl0: Ethernet address: XX:XX:XX:XX:XX:XX
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
sym0: <895> port 0xb000-0xb0ff mem 0xca800000-0xca800fff,0xcb000000-0xcb0000ff irq 11 at device 10.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xcc000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 30 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
IP Filter: v3.4.25 initialized. Default = block all, Logging = enabled
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IBM-DTLA-307060/TX8OA50C> ATA-5 disk at ata0-master
ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting WDMA2 on Intel chip
acd0: <TOSHIBA DVD-ROM SD-R1002/1034> CD-RW drive at ata1 as master
acd0: read 4133KB/s (34265KB/s) write 689KB/s (689KB/s), 2048KB buffer, WDMA2
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
Waiting 3 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
Creating DISK da0
Creating DISK da1
pass0 at sym0 bus 0 target 0 lun 0
pass0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
pass0: Serial Number XXXXXXXX
pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
pass1 at sym0 bus 0 target 1 lun 0
pass1: <SEAGATE ST39173LW 6246> Fixed Direct Access SCSI-2 device
pass1: Serial Number XXXXXXXXXXXXXXXXXXXX
pass1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
da0: Serial Number XXXXXXXX
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST39173LW 6246> Fixed Direct Access SCSI-2 device
da1: Serial Number XXXXXXXXXXXXXXXXXXXX
da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
Mounting root from ufs:/dev/da0s2a
da0s1: type 0x7, start 63, end = 17912474, size 17912412 : OK
da0s2: type 0xa5, start 17912475, end = 35841014, size 17928540 : OK
start_init: trying /sbin/init
da1s1: type 0x7, start 63, end = 6152894, size 6152832 : OK
da1s2: type 0xa5, start 6152895, end = 14329979, size 8177085 : OK
da1s3: type 0x7, start 14329980, end = 17767889, size 3437910 : OK
da1s1: type 0x7, start 63, end = 6152894, size 6152832 : OK
da1s2: type 0xa5, start 6152895, end = 14329979, size 8177085 : OK
da1s3: type 0x7, start 14329980, end = 17767889, size 3437910 : OK
----------------------------------------------------
# portversion -v
Mesa-3.4.2_2 = up-to-date with port
ORBit-0.5.15_1 = up-to-date with port
XFree86-4.2.0_1,1 = up-to-date with port
XFree86-FontServer-4.2.0 = up-to-date with port
XFree86-Server-4.2.0_2 = up-to-date with port
XFree86-clients-4.2.0_2 = up-to-date with port
XFree86-documents-4.2.0 = up-to-date with port
XFree86-font100dpi-4.2.0 = up-to-date with port
XFree86-font75dpi-4.2.0 = up-to-date with port
XFree86-fontCyrillic-4.2.0 = up-to-date with port
XFree86-fontDefaultBitmaps-4.2.0 = up-to-date with port
XFree86-fontEncodings-4.2.0 = up-to-date with port
XFree86-fontScalable-4.2.0 = up-to-date with port
XFree86-libraries-4.2.0_1 = up-to-date with port
aalib-1.4.r5 = up-to-date with port
aureal-kmod-1.3_3 = up-to-date with port
autoconf213-2.13.000227_1 = up-to-date with port
bison-1.35 = up-to-date with port
bonobo-1.0.20_1 = up-to-date with port
bugbuddy-2.0.8_1 = up-to-date with port
db3-3.2.9_3,1 = up-to-date with port
esound-0.2.24 = up-to-date with port
freetype2-2.0.9 = up-to-date with port
gal-0.19.1 = up-to-date with port
gconf-1.0.9 = up-to-date with port
gdbm-1.8.0 = up-to-date with port
gdk-pixbuf-0.16.0 = up-to-date with port
gdm-2.2.5.5 = up-to-date with port
gettext-0.10.35_2 = up-to-date with port
gettext-0.11.1_1 = up-to-date with port
ggv-1.0.2_1 = up-to-date with port
ghex-1.2.1 = up-to-date with port
ghostscript-gnu-6.53_1 = up-to-date with port
glade-0.6.4 = up-to-date with port
glib-1.2.10_5 = up-to-date with port
glibwww-0.2_1 = up-to-date with port
gmake-3.79.1_1 = up-to-date with port
gnomeapplets-1.4.0.5_1 = up-to-date with port
gnomeaudio-1.4.0 = up-to-date with port
gnomecanvas-0.16.0 = up-to-date with port
gnomecontrolcenter-1.4.0.5 = up-to-date with port
gnomecore-1.4.0.6_2 = up-to-date with port
gnomedb-0.2.96 = up-to-date with port
gnomegames-1.4.0.3_1 = up-to-date with port
gnomelibs-1.4.1.5 = up-to-date with port
gnomemedia-1.2.3 = up-to-date with port
gnomemimedata-1.0.1_2 = up-to-date with port
gnomemm-1.2.2 = up-to-date with port
gnomepilot-0.1.64 = up-to-date with port
gnomepilot-conduits-0.8 = up-to-date with port
gnomepim-1.4.3 = up-to-date with port
gnomeprint-0.35 = up-to-date with port
gnomeuserdocs-1.4.1.1 = up-to-date with port
gnomeutils-1.4.1.2_1 = up-to-date with port
gnomevfs-1.0.5_2 = up-to-date with port
gob-1.0.12 = up-to-date with port
gtk-1.2.10_4 = up-to-date with port
gtk-engines-0.12_2 = up-to-date with port
gtkglarea-1.2.2 = up-to-date with port
gtkhtml-1.0.2_1 = up-to-date with port
gtkmm-1.2.8 = up-to-date with port
gtop-1.0.13_1 = up-to-date with port
guile-1.4 = up-to-date with port
guile-gnome-0.20_3 = up-to-date with port
guile-gtk-0.20_1 = up-to-date with port
imake-4.2.0 = up-to-date with port
imlib-1.9.14 = up-to-date with port
jpeg-6b_1 = up-to-date with port
lcms-1.08 = up-to-date with port
liba52-0.7.2 = up-to-date with port
libaudiofile-0.2.3 = up-to-date with port
libdvdcss-gtk-1.0.1_1 = up-to-date with port
libdvdread-0.9.2_1 = up-to-date with port
libgda-0.2.96 = up-to-date with port
libghttp-1.0.9 = up-to-date with port
libglade-0.17_2 = up-to-date with port
libgnugetopt-1.1 = up-to-date with port
libgtop-1.0.13 = up-to-date with port
libiconv-1.7_2 = up-to-date with port
libmng-1.0.3 = up-to-date with port
librep-0.15.2_1 = up-to-date with port
libsigc++-1.0.3 = up-to-date with port
libtool-1.3.4_2 = up-to-date with port
libungif-4.1.0b1 = up-to-date with port
libunicode-0.4_2 = up-to-date with port
libwww-5.3.2 = up-to-date with port
libxml-1.8.17 = up-to-date with port
libxml2-2.4.19 = up-to-date with port
m4-1.4_1 = up-to-date with port
mad-esound-0.14.2b_2 = up-to-date with port
medusa-0.5.1 = up-to-date with port
mozilla-0.9.9_3,1 = up-to-date with port
nasm-0.98,1 = up-to-date with port
oaf-0.6.8_1 = up-to-date with port
ogle-0.8.2 = up-to-date with port
ogle-gnome-0.8.2_3 = up-to-date with port
panelmm-0.3.1 = up-to-date with port
pilot-link-0.9.5_4 = up-to-date with port
pkg_tarup-1.2_3 = up-to-date with port
pkgconfig-0.12.0 = up-to-date with port
png-1.2.1 = up-to-date with port
popt-1.5.1_1 = up-to-date with port
portupgrade-20020405 = up-to-date with port
pspell-0.12.2_1 = up-to-date with port
py-gnome-1.4.2 = up-to-date with port
py-gtk-0.6.9 = up-to-date with port
py22-numeric-20.3 = up-to-date with port
python-2.2.1 = up-to-date with port
rep-gtk-gnome-0.15_1 = up-to-date with port
ruby-1.6.7.2002.03.27 = up-to-date with port
ruby-bdb1-0.1.6 = up-to-date with port
ruby-fnmatch-1.1b_1 = up-to-date with port
ruby-optparse-0.8.6 = up-to-date with port
sawfish-gnome-1.0.1 = up-to-date with port
scrollkeeper-0.2_3 = up-to-date with port
sdl-1.2.3_1 = up-to-date with port
sox-12.17.3 = up-to-date with port
svgalib-1.4.2_1 = up-to-date with port
sylpheed-0.7.4 = up-to-date with port
tcl-8.3.4_4 = up-to-date with port
tiff-3.5.7 = up-to-date with port
tk-8.3.4_2 = up-to-date with port
unzip-5.42 = up-to-date with port
xalf-0.12_1 = up-to-date with port
zip-2.3 = up-to-date with port
From terminal window ogle started in:
---------------------------------------------------
## video_stream:got cap and stream
vs: get ouput buffer
Debug[ogle_ctrl]: _new stream bd, 80
Debug[ogle_ctrl]: Started /usr/local/lib/ogle/ogle_a52 with pid 241
Debug[ogle_ctrl]: got capability video_out
horizontal_size: 720, vertical_size: 480
padded_width: 720, padded_height: 480
frame rate: 30000/1001 (29.97)
*vs: offset not valid
warning: failed to load external entity "/home/stephenh/.oglerc"
Note[ogle_a52]: parse_config(): Couldn't read '/home/stephenh/.oglerc'
opening a 2 channel audio driver
decode: B-frame before forward ref frame
*vs: offset not valid
No accelerated IMDCT transform found
decode: B-frame before forward ref frame
*vs: offset not valid
*rt: 1018924601.677801563, last_rt: -1.000000000
bt: 0.000000000, tmptime: 1018924601.677801563
scr: 0.223731096
Sample rate 48000
warning: failed to load external entity "/home/stephenh/.oglerc"
Note[ogle_vout]: get_video_config(): Couldn't read '/home/stephenh/.oglerc'
Note[ogle_vout]: using default config for ':0.0'
Note[ogle_vout]: Using 'X11' as source for geometry
Note[ogle_vout]: Using 'XF86VidMode' as source for resolution
Note[ogle_vout]: Display w: 361, h: 271, hp: 1024, vp: 768
Note[ogle_vout]: Display sar: 277504/277248 = 1.000923
Note[ogle_vout]: Found Xv extension 2.2, checking for suitable adaptors
Note[ogle_vout]: Xv adaptor "Matrox G-Series Backend Scaler" port 51 image format 842094169
Debug[ogle_vout]: resize: 720, 539
Debug[ogle_vout]: resize: 720, 539
!!!Note[ogle_a52]: resetting offset
!!#Note[ogle_a52]: resetting offset
display: frame rate: 0.000 fps
display: frame rate: 29.880 fps
display: frame rate: 29.919 fps
display: frame rate: 30.123 fps
display: frame rate: 29.860 fps
Debug[ogle_nav]: FlowCtrlCompleteVideoUnit = 1;
Debug[ogle_nav]: end of cell
play_Cell_post: state.cellN (1)
play_Cell: state.cellN (2)
Debug[ogle_nav]: sending subpicture palette
*** Backward scr discontinuity
system_clock_reference: [0.000000 s]
prev system_clock_reference: [36.063754 s]
demux: changed to scr_nr: 1
Debug[ogle_nav]: FlowCtrlCompleteVideoUnit = 1;
Debug[ogle_nav]: end of cell
play_Cell_post: state.cellN (2)
last cell in this PGC
play_PGC_post:
CallSS_VMGM_PGC 3 resume cell 1
vm: play_PGC: state.pgcN (3)
JumpTT 1
vm: play_PGC: state.pgcN (1)
play_PG: state.pgN (1)
play_Cell: state.cellN (1)
Debug[ogle_nav]: sending subpicture palette
Debug[ogle_vout]: set_sync_point()
*** Backward scr discontinuity
system_clock_reference: [0.000000 s]
prev system_clock_reference: [0.500622 s]
demux: changed to scr_nr: 2
*rt: 1018924639.945906588, last_rt: 1018924639.448744859
bt: 0.096000000, tmptime: 1018924639.544744859
scr: 0.223731096
Note[ogle_a52]: resetting offset
!Note[ogle_a52]: resetting offset
!Note[ogle_a52]: resetting offset
!Note[ogle_a52]: resetting offset
display: frame rate: 4.800 fps
Note[ogle_a52]: resetting offset
!!Note[ogle_a52]: resetting offset
Note[ogle_a52]: resetting offset
Note[ogle_a52]: resetting offset
Note[ogle_a52]: resetting offset
#!Note[ogle_a52]: resetting offset
Note[ogle_a52]: resetting offset
---------------------------------------------------
Kernel config
---------------------------------------------------
machine i386
cpu I686_CPU
ident XXXXXXXX
maxusers 0
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options IPFILTER
options IPFILTER_LOG
options IPFILTER_DEFAULT_BLOCK
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options NTFS #NT File System
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=3000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USER_LDT #allow user-level control of i386 ldt
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L # added for CDR fix sch
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options VESA # Include support for VESA video modes
options CPU_ENABLE_SSE # enables SSE/MMX2 instructions support.
options CPU_FASTER_5X86_FPU # enables faster FPU exception handler.
#
options INCLUDE_CONFIG_FILE # Include this file in kernel
options RANDOM_IP_ID
options ICMP_BANDLIM
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
#
# Disk quotas are supported when this option is enabled.
options QUOTA #enable disk quotas
#
# options SC_DISABLE_DDBKEY # disable `debug' key
options SC_DISABLE_REBOOT # disable reboot key sequence
options SC_HISTORY_SIZE=1000 # number of history buffer lines
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
# options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device sym # NCR/Symbios Logic (newer chipsets)
options SYM_SETUP_PCI_PARITY=1 # Turn on Parity checking
options SYM_SETUP_SCSI_DIFF=1 #-HVD support for 825a, 875, 885
# disabled:0 (default), enabled:1
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device uscanner # Scanners
#
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device urio # Diamond Rio MP3 Player
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
#device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device bpf 4 #Berkeley packet filter
pseudo-device vn #Vnode driver (turns a file into a device)
pseudo-device md #Memory/malloc disk
pseudo-device snp 2 #Snoop device - to look at pty/vty/etc..
---------------------------------------------------
Any more information needed is only a question away,
Thanks for looking into this.
Regards,
Stephen Hilton
nospam@hiltonbsd.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020416124424.590f30e6.nospam>