Date: Thu, 22 Jan 2009 17:01:14 +0200 From: Alex Karpovic <alekar2009@gmail.com> To: freebsd-geom@freebsd.org Subject: GELI problem... Oh, I mean disaster Message-ID: <700ff07a0901220701p238b0a6epf3f8510c1757d1be@mail.gmail.com> In-Reply-To: <700ff07a0901220700p34d01347vbd1f03cde519bd6b@mail.gmail.com> References: <700ff07a0901200855oaf6eaccpf2693bcf791269e6@mail.gmail.com> <20090120205843.GB3819@garage.freebsd.pl> <700ff07a0901220700p34d01347vbd1f03cde519bd6b@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Witam Pawel! Thank you for response. Below are two dmesgs (current and one taken few months ago). Comparing them, one can see that the disk became smaller for about 2 megs, maybe, simply reports wrong size: 476940MB <SAMSUNG HD502IJ 1AA01112> 476938MB <SAMSUNG HD502IJ 1AA01112> Thus, it is quite natural, that GELI sees no metadata, and "geli dump" reports invalid metadata. I am still unable to understand what happened, but currently it doesn't look as software problem. New question: if I recover just last sector, but not others, than it should be possible to decipher all non-lost sectors - am I right? ==================== of September Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #1: Wed Sep 24 03:32:46 EEST 2008 head@:/usr/obj/usr/src/sys/GIRAFFE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2712.37-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 2146304000 (2046 MB) avail memory = 2092191744 (1995 MB) ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 hptrr: HPT RocketRAID controller driver v1.1 (Sep 24 2008 03:32:33) cryptosoft0: <software crypto> on motherboard acpi0: <GBT GBTUACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci2 re0: Using 2 MSI messages miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1f:d0:34:7e:c7 re0: [FILTER] re0: [FILTER] atapci0: <ATI ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 fwohci0: <Texas Instruments TSB43AB23> mem 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 22 at device 14.0 on pci3 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:63:ec:1f:00:00:1d:7d fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:63:ec:00:1d:7d fwe0: Ethernet address: 02:63:ec:00:1d:7d dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x151c000 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:63:ec:1f:00:00:1d:7d @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled Timecounters tick every 1.000 msec hptrr: no controller detected. firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <SONY DVD RW DW-Q30A/YYS1> at ata0-master UDMA33 ad1: 76350MB <SAMSUNG SP0822N WA100-34> at ata0-slave UDMA100 ad5: 476940MB <SAMSUNG HD502IJ 1AA01112> at ata2-slave UDMA33 SMP: AP CPU #1 Launched! GEOM_LABEL: Label for provider acd0 is iso9660/CDROM. Enter passphrase for ad5: GEOM_ELI: Device ad5.eli created. GEOM_ELI: Encryption: AES-CBC 256 GEOM_ELI: Integrity: HMAC/SHA1 GEOM_ELI: Crypto: software Trying to mount root from ufs:/dev/ad1s1a WARNING: ZFS is considered to be an experimental feature in FreeBSD. ZFS filesystem version 6 ZFS storage pool version 6 ================================================= =================================================Today's Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p2 #2 r187533: Wed Jan 21 23:08:53 EET 2009 root@giraffe:/usr/obj/usr/src/sys/GIRAFFE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ (2712.83-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> Cores per package: 2 real memory = 2146304000 (2046 MB) avail memory = 2083717120 (1987 MB) ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard acpi0: <GBT GBTUACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xdf00-0xdf7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1 nvidia0: <GeForce 9600 GT> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdfff000-0xfdffffff irq 18 at device 0.0 on pci2 re0: turning off MSI enable bit. re0: Chip rev. 0x38000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:1f:d0:34:7e:c7 re0: [FILTER] atapci0: <ATI IXP600 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 4 ports detected ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] ohci2: [ITHREAD] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] ohci3: [ITHREAD] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] ohci4: [ITHREAD] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata0: [ITHREAD] pcm0: <ATI SB600 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0 pcm0: [ITHREAD] isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 fwohci0: <Texas Instruments TSB43AB23> mem 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 22 at device 14.0 on pci3 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:63:ec:1f:00:00:1d:7d fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:63:ec:1f:00:00:1d:7d @ 0xfffe00000000, S400, maxrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:63:ec:00:1d:7d fwe0: Ethernet address: 02:63:ec:00:1d:7d dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x194c000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 device_attach: powernow1 attach returned 6 pmtimer0 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: [ITHREAD] plip0: <PLIP network interface> on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acd0: DMA limited to UDMA33, device found non-ATA66 cable acd0: DVDR <SONY DVD RW DW-Q30A/YYS1> at ata0-master UDMA33 ad1: 76350MB <SAMSUNG SP0822N WA100-34> at ata0-slave UDMA100 ad6: 610480MB <Seagate ST3640323AS SD35> at ata3-master SATA300 ad8: 476938MB <SAMSUNG HD502IJ 1AA01112> at ata4-master SATA300 pcm0: <HDA Codec: Realtek ALC888> pcm0: <HDA Driver Revision: 20080420_0052> SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad1s1a This module (opensolaris) contains code covered by the Common Development and Distribution License (CDDL) see http://opensolaris.org/os/licensing/opensolaris_license/ WARNING: ZFS is considered to be an experimental feature in FreeBSD. spa_config_load:90[1]: Cannot open /boot/zfs/zpool.cache. ZFS filesystem version 6 zvol_init:794[1]: ZVOL Initialized. ZFS storage pool version 6 WARNING: /old was not properly dismounted ================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?700ff07a0901220701p238b0a6epf3f8510c1757d1be>