Date: Sat, 8 Apr 2006 21:41:00 +0200 From: Fabian Keil <freebsd-listen@fabiankeil.de> To: "Erin Sharmahd" <tuxgirl@gmail.com> Cc: questions@freebsd.org Subject: Re: cdrecord on Thinkpad T43 Message-ID: <20060408214100.7d09c6ef@localhost> In-Reply-To: <6e4453640604081222q66494870j3ba0a03996c2df5c@mail.gmail.com> References: <6e4453640604081222q66494870j3ba0a03996c2df5c@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Sig_UoMlbSleVSpLf+1qk1cfPUo Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable "Erin Sharmahd" <tuxgirl@gmail.com> wrote: > I've been having some problems getting cdrecord to work on my > thinkpad. >=20 > http://www.mathematik.uni-marburg.de/~schmidtm/ibm/index.php says: > "To burn CDs with cdrecord don't forget to enable atapicam during > kernel configuration." >=20 > In his kernel config, he used this with "device atapicd", so I ran: He doesn't use atapicam in his kernel configuration. > [amon-re /root] cat /sys/i386/conf/GENERIC | grep atapicd > device atapicd # ATAPI CDROM drives >=20 > In the past (on Linux), I had always used 'cdrecord dev=3D/dev/cdrom', > so I initially tried 'cdrecord dev=3D/dev/acd0', but I learned from > 'cdrecord dev=3Dhelp' that apparently "open via UNIX device" is not > supported. "SCSI Bus scanning" is supposed to be supported, but when > I run 'cdrecord -scanbus', it gives: > [amon-re /root] cdrecord -scanbus > Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 > J=F6rg Schilling > cdrecord: Error 0. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > cdrecord: For possible transport specifiers try 'cdrecord dev=3Dhelp'. >=20 > (it would be nice if cdrecord -scanbus didn't tell me to run it > again... but that's a different issue) >=20 > Here is some (hopefully) relevant information about my system: >=20 > [amon-re /root] uname -a > FreeBSD amon-re 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #1: Sat Feb 11 > 21:55:30 MST 2006 zoot@amon-re:/usr/obj/usr/src/sys/GENERIC i386 >=20 > [amon-re /root] sysctl -a | grep -i cd > kern.cam.cd.changer.min_busy_seconds: 5 > kern.cam.cd.changer.max_busy_seconds: 15 > allocdirect 4 1K - 79793 128 > acd_driver 1 2K - 1 2048 > cdev 31 4K - 31 128 > debug.sizeof.cdev: 184 > debug.sizeof.cdev_priv: 216 > dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT > dev.cbb.0.%location: slot=3D0 function=3D0 handle=3D\_SB_.PCI0.PCI1.CDBS > dev.acd.0.%desc: MATSHITADVD-RAM UJ-822S/1.61 > dev.acd.0.%driver: acd > dev.acd.0.%parent: ata1 >=20 > [amon-re /root] dmesg | grep -i cd > acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on > acpi0 acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.61> at ata1-master UDMA33 You didn't enable atapicam. You can either kldload atapicam or add it to your kernel configuration as "device atapicam". Fabian --=20 http://www.fabiankeil.de/ --Sig_UoMlbSleVSpLf+1qk1cfPUo Content-Type: application/pgp-signature; name=signature.asc Content-Disposition: attachment; filename=signature.asc -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (FreeBSD) iD8DBQFEOBHRjV8GA4rMKUQRAlp8AKDCeH8e1WAVrrPlDx60nZYpj9/3TgCgtgNh cy7xxLtzTiqz9sDfKBU/vxw= =Ihct -----END PGP SIGNATURE----- --Sig_UoMlbSleVSpLf+1qk1cfPUo--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060408214100.7d09c6ef>